• Electrical & Electronic Materials
• /
• v.10 no.1
• /
• pp.20-25
• /
• 1997

In this study, piezoelectric actuator samples were fabricated using 0.375PMN-0.37OPT-0.255PZ system ceramics with Barium substitution and the strain properties of them were investigated. Dielectric constant of the specimens increased with the increase of Ba content up to 5mol% and decreased with futher addition of Ba. The largest piezoelectric coefficient and electromechanical coupling coefficient were observed at the sintering temperature of 1250'C and Barium content of 5mol%. The characteristics of strain hysteresis was found largely with varing the sintering temperature on the single round type, and the strain is proportional to piezoelectric coefficient.

• Journal of the Korean Ceramic Society
• /
• v.28 no.4
• /
• pp.297-304
• /
• 1991

Dielectric hysteresis characteristics of Pb(Zr0.52Ti0.48)O3 ceramics have been investigated as a function of the amount of MnO2 addition ranged from 0.0 wt% in Pb(Zr0.52Ti0.48)O3 ceramics enhanced the dielectric strength, aging effect and remanent polarization, while reduced the coercive field. These results could be explained by the effect of Mn-Vo association due to the substitution of Mn for the (Zr, Ti) site in PZT.

• The Journal of Engineering Geology
• /
• v.18 no.3
• /
• pp.257-262
• /
• 2008

In the study it was investigated the diffusion characteristics of heavy metal pollutions such as Cu, Pb, Hg and As which was the main pollution sources of soils from abandoned mines. The pollution of Cu and Pb was caused by Mine A, that of Hg was caused by Mine 3, that of Pb was caused by Mine C and that of Cu, Pb, As was caused by Mine D. Though the high concentration was detected within 100m from abandoned mines, the low concentration was detected over than 100m from abandoned mines in all heavy metals investigated except As. It means that it was very difficult to estimate the pollution level of As caused abandoned mines. The results were discussed in the concentrations of Cu, Pb and distances showed a good relationship with 0.71 and 0.68 as the coefficient of correlation, respectively. In particular the relativity of Cu to Pb as very strong with 0.84 as the coefficient of correlation. It was consistent with the chemical behavior in soils in the case of Cu and Pb. Therefore it will be a promising approach to remove Cu and Pb with estimated values in the study.

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.1011-1019
• /
• 1998

This work designed Sn-5%Pb-1.5%Ag-x%In solder alloy to develop the solder alloy with low Pb content. This solder alloy doesn't cause environmental pollution. and this study reviewed the probability of replacement of Sn-37%Pb solder as evaluation of melting range, wettability. microstructure, microhardne'ss, tensile strength, drossability of this new solder alloys. The level of international regulation in dissolution amount of Pb ion was 3ppm. But dissolution amount of Pb ion in Sn-5%Pb solder alloy confirmed not to threat the global environmental is 0.46ppm. The melting range of this solder alloy was $183-192^{\circ}C$. Also the range of solidification was very narrow within $5^{\circ}C$. The wettability was similar to Sn-37%Pb solder, and the effect of amount of In addition of wettability couldn't be founded. The probability of replacement in the melting range and wettability is very high. And microhardness of this solder alloy was 1.5 times of conventional type solder. Tensile strength of new solder alloys was a little high than that of conventional type solder. With increasing amount of In% addition, tensile strength was increased, but elongation was decreased. The solder alloy of l%In addition revealed AgSn and Pb on dendrite microstructure boundary, and $Ag_3Sn$, $Ag_3In$ and Pb were revealed on it at the solder alloy of 3% In addition. The drossability was superior to Sn-37%Pb solder alloy and the solder alloys of 2% In addition was not generated for 3hrs.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.11a
• /
• pp.62-62
• /
• 1996

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.136-136
• /
• 1997

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2000.11a
• /
• pp.145-145
• /
• 2000

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.05a
• /
• pp.33-33
• /
• 1996

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.744-746
• /
• 1992

In this study, we investigated structural, electrical characteristics and studied the conditions which improved hydrostatic constants in hydrophones as we changed x = 0.1, 0.25, 0.35, 0.4 and y = 0.04, 0.08, 0.12, 0.16 in $(Pb_{1-x}Ca_x)[(Mg_{1/3}Nb_{2/3})_yTi_{1-0.01}Mn_{0.01}]O_3$ ceramics in which Ca was substituted with Pb and $Pb(Mg_{1/3}Nb_{2/3})O_3$ was added to decrease sintering temperature in $PbTiO_3$. When Ca was substituted 0.25[mol], the largest electro-mechanical anisotropy ($k_t/k_p$) was found ($k_t{\fallingdotseq}50,k_p{\fallingdotseq}4$), and the less $Pb(Mg_{1/3}Nb_{2/3})O_3$ and the stronger poling field, the larger this anisotropy was. When Ca=0.25[mol], $Pb(Mg_{1/3}Nb_{2/3})O_3=0.08[mol]$ were substituted, ($k_t/k_p$)(=12, 3) was large, permittivity was low and hydrostatic constants were high. Therefore, this composition is promising as wide band ultrasonic devices in water.

• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.99-102
• /
• 1999