• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.94-101
• /
• 2010

Composite materials have a higher specific strength and modulus than traditional metallic materials. Additionally, these materials offer new design flexibilities, corrosion and wear resistance, low thermal conductivity and increased fatigue life. These, however, are susceptible to impact damage due to their lack of through-thickness reinforcement and it causes large drops in the load-carrying capacity of a structure. Therefore, the impact damage behavior and subsequently load-carrying capacity of impacted composite materials deserve careful investigation. In this study, the residual strength and impact characteristics of plain-woven CFRP composites with impact damage are investigated under axial tensile test. Impact test was performed using drop weight impact tester. And residual strength behavior by impact was evaluated using the caprino model. Also we evaluated behavior of residual strength by change of mass and size of impactor. Examined change of residual strength by impact energy change through this research and consider impactor diameter in caprino model.

• 대한토목학회논문집
• /
• 제13권3호
• /
• pp.35-44
• /
• 1993

저렴한 가격이면서 새로운 PVDC Latex의 제조, 이것을 활용한 다양한 색채의 고강도 폴리머콘크리트의 생산, 그리고 이것의 전단거동에 관한 이론을 정립하여 건설공사에 활용토록 하는 것을 목적으로 한다. 본 연구의 내용으로서는 이것을 사용한 신폴리머 콘크리트의 설계에 있어서 혼합특성, 물리적 특성을 연구한다. 이 중에서 가장 중요한 것은 압축강도, 휨강도, 정적극한강도, 피로강도 등이다. 이것을 이용한 보에 있어서는 중앙처짐, 반복횟수와 변형률관계, 파괴양식 등을 연구하여 본 목적의 활용성을 검증토록 한다. 그래서 콘크리트의 단점인 취성파괴를 보완하고 화학적인 성질로 일어날 수 있는 콘크리트의 부식이나 파손을 방지하도록 한다. 연구결과 피로실험에서 이형철근이나 스터럽의 파단은 순간적으로 일어나며 파단된 단면은 매끄러웠다. 또한 이러한 부분의 재질분석을 통하여 피로하중이 작용할 때 미세균열이 일어나고 있었다는 사실을 확인 할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제90권5호
• /
• pp.435-446
• /
• 2024

The use of cold-formed steel members is increasing day by day, especially in regions where earthquake effects are intensively experienced. Among cold-formed steel members (CFS), "channel" members are used more than other crosssectional members, especially in buildings or industrial structures. In recent years, several studies have been carried out on the axial load and flexural performance of these members under monotonic loading. In this study, CFS beam-column members were cyclically and monotonically loaded under combined axial load and biaxial bending moments, and their buckling behavior, load bearing capacity, stiffness, ductility, and energy absorption capacity were determined. For this purpose, monotonic and cyclic loading experiments were carried out on 30 CFS channel members at 15 different eccentricities. Then, material properties were determined by axial monotonic tensile and very low cycle fatigue tests for use in numerical studies. From the experimental results, the buckling modes, bearing capacities, ductility, stiffness, and energy absorption capacities of the members were obtained. The characteristics of the members were compared according to the stress state of the lips. According to the data obtained from the displacement transducer placed on the lips and on the back of the web, information about the buckling mode and curvature of the members was obtained. Finally, monotonic, and cyclic loading results were compared to determine the differences in the buckling behavior of the members.

• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1856-1863
• /
• 2003

Overlay model had several advantages to describe hysteretic behavior of material and showed good capability for many engineering materials. However, this model is only applicable to material obeying Masing postulate. Some materials such as 316L stainless steel do not follow Masing postulate and show cyclic hardening(or softening) and strain range dependence. Low cycle fatigue tests of 316L stainless steel at 600$^{\circ}C$ were performed to investigate the characteristics of cyclic behavior of non-Masing material. From all tests cyclic softening was observed. There were differences in elastic limit of hysteresis loop according to applied strain range. To consider these features, modified overlay model was developed. Yield stresses of subelements were divided into isotropic and anisotropic part to describe the non-Masing behavior. The plastic strain range memorization was introduced to consider the strain range dependence. The prediction using modified overlay model showed a good accordance to actual hysteresis loops.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.101-106
• /
• 2006

Balance shaft has a key role in reducing a engine vibration in a vehicle and widely applied for current models. Since balance shaft module consists many sub-component and each part has its own operational characteristics, some different analysis backgrounds should be integrated into one sub-part in balance shaft module and this is the main obstacles in making a design process. Moreover, the balancing shaft is rotating in high speed and such condition requires large safety factors in a design process owing to a lot of unexpected problems with the overwhelming rotation. Balance shaft is the core-component generating the intended unbalance as well as cancelling the unbalance force or moment by the engine module. So, the balance shaft should meet the high fatigue resistance not to mention of NVH performance. In this paper, a design strategy focused on balance shaft is developed to build a optimal model considering a engine vibration. Putting the unbalance mass distribution as main design parameter, some candidate model is verifed with structural and fatigue analysis and most appropriate model is proposed here.

• Human Ecology Research
• /
• 제54권6호
• /
• pp.599-610
• /
• 2016

The purposes of this study are to identify the characteristics of limited edition fashion consumers, to analyze their purchase decision-making processes, and to examine negative factors of consumers' recognition toward limited edition fashion products. A qualitative investigation was conducted by doing in-depth interviews with 11 selected consumers in their twenties and thirties who have actively purchased and consumed limited edition fashion products. The results of this study can be summarized as follows. First, there are four sub-categories of appearance management activity, acceptance of fashion trend, information-seeking behavior, and hedonic shopping orientation for the limited edition fashion consumers' characteristics. Second, the purchase decision-making process of limited edition fashion consumers are identified as seven steps: need recognition, information search, evaluation of alternatives, planning and courtship, purchase, post-purchase evaluation, and post-purchase behavior. Courtship/attachment formation and post-purchase behavior are unique steps when compared to general purchase decision-making process. Third, this study identified negative factors of consumers' recognition toward limited edition this study in order to suggest several improvement plans for enterprises using limited marketing. Four sub-categories are examined: outrageous price, tricks of company, fatigue due to purchasing competition, and re-sellers. In conclusion, this study indicates that the purchase decision-making process of limited edition consumers, which involves two distinctive steps including courtship/attachment formation and post-purchase behavior, can be differentiated from general consumers. The results of this study provides preliminary data for further research for in-depth analysis of limited edition consumers.

• 한국결정성장학회지
• /
• 제25권6호
• /
• pp.294-298
• /
• 2015

일본 국토교토성이 책정한 <도로교 장수명화 수선계획사업>에 의하면, 주요 지역에 건설된 RC 상판의 심각한 손상 원인은 대형차량의 주행하중에 의한 피로열화와 재료의 경년열화 등으로 보고되어지고 있다. 따라서 이에 대한 대책으로 탄소섬유 시트를 이용한 하부 접착 보강공법이 많이 소개되어지고 있으나, 최근에는 CFS와 동등한 재료특성치를 보유하며, 시공성이 뛰어난 탄소섬유 스트랜드 시트가 새로운 보강재료로써 관심이 증폭되어지고 있다. 그러나 이러한 CFSS의 윤하중 피로실험을 통한 내피로성 평가는 현재 일부 연구기관에서만 그 성과가 보고되어지고 있는 실정이며, 국내에서는 아직까지 연구성과에 관한 보고 등이 거의 없는 실정이다. 따라서 본 연구에서는 RC 상판의 하부에 CFS를 전면접착 보강한 실험체와 CFSS를 격자형으로 보강한 실험체를 제작하여, 윤하중 피로실험을 실시하고 내피로성을 평가하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.94-100
• /
• 2002

During the last years, great progress has been made in the fields of welding power sources and filler materials for the MIG-welding of magnesium alloys. This advice resulted in a better welding process, md, therefore, in highly improved welding results. Furthermore the gap between short-circuiting- and spray-arc-trunsfer could be closed by the triggered short-circuiting- and the short-circuiting-arc with pulse overlay. A crucial contribution to the welding process is the energy input into the filler material. Many problems result from the physical properties of magnesium, for instance its narrow interval between melting point 600$^{\circ}C$ and vaporization point 1100$^{\circ}C$. The energy input into the filler material has to be regulated in such a way that the wire will melt but not vaporize. For th is reason, special characteristics of power sources hue been examined and optimized with the help of high-speed-photographs of the welding process with particular consideration of the drop detachment. An important improvement of the weld seam profile has been achieved by using filler material of only 1.2 mm in diameter. The experiments hue been made with 2.5 mm thick extruded profiles of AZ31 and AZ6l. The results of tensile testing showed strength values of 80 to 100% of the base metal. B ending angles up to 60$^{\circ}$ have been reached. The fatigue strength under reversed bending of the examined magnesium alloys after welding reaches 50% of the strength of the base metal. When the seam reinforcement is ground of the fatigue strength can be raised up to 75% of the base metal.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.135-136
• /
• 2006

Bismuth titanate ($Bi_4Ti_3O_{12}$, BIT) thin film has been studied intensively in the past decade due to its large remanent polarization, low crystallization temperature, and high Curie temperature. Substitution of various trivalent rare-earth cations (such as $La^{3+}$, $Nd^{3+}$, $Sm^{3+}$ and $Pr^{3+}$) in the BIT structure is known to improve its ferroelectric properties, such as remanent polarization and fatigue characteristics. Among them, neodymuim-substituted bismuth titanate, ((Bi, Nd)$_4Ti_3O_{12}$, BNT) has been receiving much attention due to its larger ferroelectricity. In this study, Ferroelectric $Bi_{3.3}Nd_{0.7}Ti_3O_{12}$ thin films were successfully fabricated by liquid delivery MOCVD process onto Pt(111)/Ti/$SiO_2$/Si(l00) substrates. Fabricated polycrystailine BNT thin films were found to be random orientations, which were confirmed by X-ray diffraction and scanning electron microscope analyses. The remanent polarization of these films increased with increase in annealing temperature. And the film also demonstrated fatigue-free behavior up to $10^{11}$ read/write switching cycles. These results indicate that the randomly oriented BNT thin film is a promising candidate among ferroelectric materials useful for lead-free nonvolatile ferroelectric random access memory applications.

• 대한간호학회지
• /
• 제50권5호
• /
• pp.658-670
• /
• 2020

Purpose: This study aimed to identify the predictors of blood and body fluid exposure (BBFE) in multifaceted individual (sleep disturbance and fatigue), occupational (occupational stress), and organizational (hospital safety climate) factors, as well as infection prevention behavior. We also aimed to test the mediating effect of infection prevention behavior in relation to multifaceted factors and the frequency of BBFE. Methods: This study was based on a secondary data analysis, using data of 246 nurses from the Shift Work Nurses' Health and Turnover study. Based on the characteristics of zero-inflated and over-dispersed count data of frequencies of BBFE, the data were analyzed to calculate zero-inflated negative binomial regression within a generalized linear model and to test the mediating effect using SPSS 25.0, Stata 14.1, and PROCESS macro. Results: We found that the frequency of BBFE increased in subjects with disturbed sleep (IRR = 1.87, p = .049), and the probability of non-BBFE increased in subjects showing higher infection prevention behavior (IRR = 15.05, p = .006) and a hospital safety climate (IRR = 28.46, p = .018). We also found that infection prevention behavior had mediating effects on the occupational stress-BBFE and hospital safety climate-BBFE relationships. Conclusion: Sleep disturbance is an important risk factor related to frequency of BBFE, whereas preventive factors are infection prevention behavior and hospital safety climate. We suggest individual and systemic efforts to improve sleep, occupational stress, and hospital safety climate to prevent BBFE occurrence.