• Structural Engineering and Mechanics
• /
• v.84 no.5
• /
• pp.699-706
• /
• 2022

Settlement control techniques are critical for the safety of shield tunnel constructions, especially for facing complex situations. In this study, the shield tunnel structure from Huaita east road station to Heping Road station in Xuzhou metro No.3 line (China) is taken as engineering background, which has various complex problems of the upper-soft and lower-hard composite stratum conditions, twin curve shield tunnels, and underpass the foundation of the piled raft. The deformation characteristics of shield tunnelling passing through buildings are explored. Subsequently, comprehensive research methods of numerical simulation and field measurement are adopted to analyzing the effectiveness of settlement control by using the top grouting technique. The results show that the settlement of the buildings has obvious spatial characteristics, and the hysteresis effect can be obviously observed in soil deformation caused by shield construction. Meanwhile, the two shield constructions can cause repeated disturbances, reducing the soil deformation's hysteresis effect. Moreover, the shield tunnel's differential settlement is too large when a single line passes through, and the shield construction of the outer curve can cause more significant disturbance in the tunnel than the inside curve. Notably, the proposed process control parameters and secondary topgrouting method can effectively control the deformation of the shield tunnel, especially for the long-term deformation.

• Journal of Korean Society on Water Environment
• /
• v.33 no.6
• /
• pp.650-660
• /
• 2017

In this study, pollutant emission characteristics by water damage period analyzed 11 items (water temperature, pH, DO, EC, BOD, COD, TOC, SS, T-N, T-P and flow) with load duration curve, time series load curve and factor analysis for three years (2014-2016). Load duration curve is applied to judge the level of impaired waterbody and estimate impaired level by pollutants such as BOD and T-P in this study depending on variation of stream flow. Water quality standard exceeded the flow of mid-range and low-range by flow condition evaluation using load duration curve. This watershed was influenced by point source more than non-point source. Cumulative excess rate of BOD and T-P kept water quality standard for all seasons (spring, summer, autumn and winter) except BOD 59% in spring. Water quality changes were influenced by pollutants of basic environmental treatment facilities and agricultural areas during spring and summer. Results of factor analysis were classified commonly first factor (BOD, COD, and TOC) and second factor (flow, water temperature and SS). Therefore, effects of artificial pollutants and maintenance water must be controlled seasonally and reduced relative to water damage caused by point pollution sources with effluent standard strengthened in the target watershed.

• Journal of Animal Science and Technology
• /
• v.58 no.2
• /
• pp.8.1-8.14
• /
• 2016

In this research data representing 72,946 primiparous cows from 724 herds with 638,063 total test day records calved between 2001 and 2011. These data were analysed to determine the effect of age at first and season of calving on parameters of the Wood lactation curve. Also, genetic trend of the lactation curve parameters in different calving years were evaluated. The results indicate that the highest rate of atypical lactation curve was related to cows that calved in summer (28.05 %). The maximum phenotypic relationship between initial milk yield and total 305-d milk yield was observed in cows calved in spring (0.40). The role of peak yield is more than peak time on 305-d total milk yield in primiparous Holstein. One month increase in age at first calving from 18 to 26 month raised 305-d milk yield by around 138 kg and from 27 to 32 month decreased by 61 kg. The persistency of lactation between 101 and 200 days is higher than that of 201-305 days. Our results indicate that the shape of lactation curve is largely dependent on the season of calving (higher level of milk production in cows which calved in autumn and winter). The heritabilities of parameters of lactation curve and persistency measures were low. The genetic trends for peak time, peak yield and 305-d milk yields were positive and estimated to be 0.019, 0.021 and 8.13 kg/year respectively. So the range from 24 to 26.5 month of calving is the optimum calving time in primiparous Holstein for maximizing 305-d milk yield.

• Journal of the Korean Society for information Management
• /
• v.3 no.1
• /
• pp.40-49
• /
• 1986

This article is offered as an introduction to the forms, and structure and characteristics of the periodical literature of science and technology. The growth of scientific knowledge take the form of the logistic curve.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.04a
• /
• pp.475-478
• /
• 2000

Recently encryption algorithms based on difficulties of factorization have been used with popularization. Prime number factorizations are progressed rapidly. In this paper, characteristics of elliptic curve are analyzed and generation of elliptic curves suitable for prime number factorization is discussed.

• 연구논문집
• /
• s.34
• /
• pp.59-68
• /
• 2004

The hot spot stress approach and the notch strain approach are discussed with some results of them. And a stress model that can be applicable to several types of weld joints with single S-N curve of the base material. The stress model uses the geometric characteristics of the stress distribution vicinity of weld joints. The model was applied to five different weld joins(the base material is SM490B). By the representative stress, the experimental fatigue data are plotted very closely to the S-N curve of the base material.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1991.10a
• /
• pp.10-11
• /
• 1991

In this paper, Arachidic Acid of long-chain fatty acid was soluted by chloroform and observed $\pi$-A curve in trough. In our experimental result, optimum pressure for fabricating the LB film was 30mN/m. In $\pi$-A curve measurment, temperature dependence was investigated between 20-50($^{\circ}C$). However, in this temperature range, the variation of solid phase pressure was not observed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.111-118
• /
• 2008

The purpose of this paper was to investigate the overburden effect on soil-water characteristic curve and unsaturated permeability of unsaturated weathered soils. For this, unsaturated suction and permeability tests under various overburden stress were conducted respectively. Then, the coefficient of unsaturated permeability and moisture capacity of weathered soils were estimated and compared. All these results are presented in the paper.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.205-211
• /
• 2011

The papaer reviews four theoretical acceptance sampling plans as OC(Operating Characteristics) curve based inspection, rectifying inspection, switching inspection, and continuous inspection. In addition, the study presents practical limitations of theoretical acceptance sampling by attribute and by variable. Finally, following research also recommends the sampling inspection based on production technology. However, the inspection method requires quality expertise with various experience and implicit knowledge of the field.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.601-604
• /
• 2007

In this paper, we report the wall voltage transfer characteristic between sustain electrodes according to the address bias voltage in a 3-electrodes surface discharge type ac PDP by the VT close curve measurement technique. The result shows the change of wall voltage according to the gap voltage variation depends on the address bias voltage.