• 복식문화연구
• /
• 제15권1호
• /
• pp.81-97
• /
• 2007

The purposes of this study were to build the concept of luxury brand and analyze the previous luxury brand studies. A number of publication and journals were reviewed and analyzed depending on subjects and year. The result of review and analysis were as follows: 1. The concept of luxury brand in the previous studies were arranged and the concept of luxury brand was defined by special characteristics of luxury brand. The subjects were usually categorized into three fundamental groups: luxury brand consumer characteristics, Marketing's 4P of luxury brand, social & culture analysis of luxury brand. In general, the studies of luxury brand consumer characteristics are conducted most actively, and they are followed by the marketing of luxury brand and social & culture analysis of luxury brand. 2. Luxury brand studies were organized by year. As a result, of this study, It tends to increase the concern and studies of luxury brand from 2003 to 2005. At the beginning of luxury brand studies, the consumer characteristics studies were researched actively. However the marketing studies were increasing and subjects were diversed gradually. But, previous studies of Luxury brand lacked in explaining changed consumer characteristics, marketing and social & culture analysis. Thus, this study directed the future studies to study deep into luxury brand studies.

• 전기학회논문지
• /
• 제63권5호
• /
• pp.629-635
• /
• 2014

This paper describes propagation characteristics obtained by considering semiconducting screen and cross-bonding in underground transmission cables. The semiconducting screen of power cable has effect on propagation characteristics including attenuation, velocity and surge impedance. However, it is very difficult to apply the semiconduction screen for EMTP model because of the number of conductors limitation. Therefore, CIGRE WG 21-05 proposed advanced insulation structure and analysis technique of simplified approach including inner and outer semiconducting screen. In this paper, the various propagation characteristics analyse using this structure and technique for 154kV XLPE $2000mm^2$ cable. The frequency independent model of EMTP CABLE PARAMETER is used for just pattern analysis of propagation characteristics. For exact data analysis, the frequency dependent model of J-marti is used for EMTP modeling. From these result, various propagation characteristics of 154kV XLPE $2000mm^2$ cable according to semi conducting screen consideration, frequency range, cable length and pulse width are analysed. In addition, in this paper, the effects of cross-bonding are also variously discussed according to cross-bonding methods, direct connection and impedance of lead cable.

• Design & Manufacturing
• /
• 제15권1호
• /
• pp.66-71
• /
• 2021

In this study, die turning injection(DTI) mold design for manufacturing reservoir fluid tanks used for cooling in-vehicle batteries, inverters, and motors was conducted based on multi-field CAE. Part design, performance evaluation, and mold design of the reservoir fluid tank was performed. The frequency response characteristics through modal and harmonic response analysis to satisfy the automotive performance test items for the designed part were examined. Analysis of re-melting characteristics and structural analysis of the driving part for designing the rotating die of the DTI mold were performed. Part design was possible when the natural frequency performance value of 32Hz or higher was satisfied through finite element analysis, and the temperature distribution and deformation characteristics of the part after injection molding were found through the first injection molding analysis. In addition, it can be seen that the temperature change of the primary part greatly influences the re-melting characteristics during the secondary injection. The minimum force for driving the turning die of the designed mold was calculated through structural analysis. Hydraulic system design was possible. Finally, a precise and efficient DTI mold design for the reservoir fluid tank was possible through presented multi-field CAE process.

• 국토계획
• /
• 제54권5호
• /
• pp.76-90
• /
• 2019

The purpose of this study is to analyze the survival characteristics of the restaurant business by trade area type (major and side street). By the increase of the unemployment rate, the new foundation of selt-employment type is increasing. However, due to high competition and economic recession, the sustainability of new foundation is not high. Therefore, in this study, survival analysis was performed considering the individual and commercial characteristics focused on the ordinary restaurants. The major findings are as follow. First, the characteristics of parcel unit and adjacent area have a significant effect on the survival. This means the micro-scopic spatial characteristics should be considered for survival in the location choice. Second, the regional economic characteristics in trade area have a significant effect on survival. Furthermore, these characteristics are different by the trade area type. Third. the development characteristics have a different effect on survival by the building usage and trade area type. Finally, regional economic characteristics have a significant effect on survival. These results are expected to be used as basic data for commercial location selection and trade area analysis system in the private and public sectors.

• 한국전산유체공학회지
• /
• 제15권4호
• /
• pp.109-114
• /
• 2010

In a fan design, CFD analysis, which is very useful for mechanical design relating to the heat and fluid dynamics, is one of the most popular tools. However, since the CFD analysis is conventionally carried out with the constant fan speed condition, the speed change, induced by the air flow rate and motor characteristics, is hardly modeled. And, consequently, the remarkable difference exist between analysis and experimental results. In this paper, we has proposed a method of setting the varying fan speed as a boundary condition considering air flow rate and motor torque-speed characteristics. The effectiveness of the proposed method is verified by comparison with experimental results.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.178-183
• /
• 2014

This paper presents a motor characteristics analysis method using an equivalent circuit. Motor characteristics analysis via equivalent circuit is very important for designing a high efficiency single phase induction motor. The accuracy of the motor characteristics depends on the accuracy of the parameters, especially saturation factor, which determines the cyclical relationship in the analysis process. Therefore, using the proposed method, the saturation factor was calculated using the iteration routine and numerical technique. The proposed method was verified by comparing the finite element method results and the dynamo test results of manufactured prototype model.

• 한국의류학회지
• /
• 제19권2호
• /
• pp.366-379
• /
• 1995

This study was performed to provide fundamental data on middle-aged women's upper torso by classifying the upper torso somatotype and analyzing the characteristics of their somatotype. Factor analysis of principal component model was used to 38 directly measured items, and cluster analysis was applied for classification of upper torso forms. Seven factors were extracted from the factor analysis. The first factor represented the items of circumference, breadth, and depth which were related with body size. On the basis of the cluster analysis using factor scores trom factor analysis as being independent variables, the subjects were classified into three groups. Three dress forms were constructed according to the characteristics for each somatotype of subjects, the three-dimensional characteristics of somatotype were analyzied by the moire pattern and horizontal section map of proposed dress forms. Wearing test by moire topography was used to evaluate wearing outline, the ease of clothes and garment space. Moire pattern and horizontal section map were useful to evaluate wearing conditions, and garment space was changed by the characteristics of the body shape.

• Journal of electromagnetic engineering and science
• /
• 제11권2호
• /
• pp.122-127
• /
• 2011

A general analysis of an aperture-coupled vertically mounted strip antenna is presented to examine its circuit characteristics. Based on the present analysis, an equivalent circuit model is developed, and an analytic or semi-analytic evaluation of the related circuit element values is described. The effects of structure parameters on the antenna characteristics were studied with the developed equivalent circuit, and the design curves were obtained. To check the validity of the proposed analysis and design theory, two C-band antennas (5.0 GHz and 4.5 GHz) were designed and fabricated. Their computed characteristics, derived from the proposed network analysis, were compared with the measurement and simulation results. The error of the current model in predicting the operating center frequency was less than 0.50 %. In addition, the observed bandwidth was found to be comparable to the conventional microstrip antennas. All the results fully validated the efficiency and accuracy of the proposed analysis and network model.

• 한국통신학회논문지
• /
• 제42권4호
• /
• pp.923-931
• /
• 2017

A power grid is one of the most complex networks and is critical infrastructure for society. To understand the characteristics of a power grid, complex network analysis has been used from the early 2000s mainly for US and European power grids. However, since the power grids of different countries might have different structures, the Korean power grid needs to be examined through complex network analysis. This paper performs the analysis for the Korean power grid, especially for high-voltage transmission networks. In addition, statistical and small-world characteristics for the Korean power grid are analyzed. Generally, the Korean power grid has similar characteristics to other power grids, but some characteristics differ because the Korean power grid is concentrated in the capital area.

• 한국농공학회논문집
• /
• 제49권1호
• /
• pp.3-13
• /
• 2007

In this study, spatial characteristics of rainfall in Imha basin were investigated by cross-correlation analysis among rainfall gaging stations and rainfall-runoff analysis used in HEC-HMS model for analysis of influence on observed rainfall. The Kriging technique was applied to rain(all analysis in Imha basin to reflect spatial characteristics of regional rainfall. Their results are compared to rainfall-runoff data with spatially distributed rainfall data as well as the classical thiessen method. The results by kriging technique approached by geostatistical method could reflect spatial characteristics of regional rainfall properly in Imha basin.