• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.267-280
• /
• 2012

An approximate method based on an assumed mode method has been presented for the free vibration analysis of a rectangular plate with arbitrary edge constraints. In the presented method, natural frequencies and their mode shapes of the plate are calculated by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange's equations of motion. Characteristic orthogonal polynomials having the property of Timoshenko beam functions which satisfies edge constraints corresponding to those of the objective plate are used. In order to examine the accuracy of the proposed method, numerical examples of the rectangular plates with various thicknesses and edge constraints have been presented. The results have shown good agreement with those of other methods such as an analytic solution, an approximate solution, and a finite element analysis.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.11B no.2
• /
• pp.51-58
• /
• 2001

This paper proposes a new strategy to estimate the rotor flux of an induction machine for the direct field oriented control. Electrical model of the induction machine presents the basic idea based on observer structure, which is composed of voltage model and current model. But the former has the defects in low speed range, the latter has the defects of sensitivity to machine parameters. In spite of these shortcomings, the closed loop flux observer based on two models has been prevalent estimation method for the direct field oriented control. In this paper, generalized analysis method named "observer characteristic function method"is proposed to analyze the kinds of the linear flux observers in unified form. With the observer characteristic function, the estimated rotor flux error involved in the classical methods can be easily clarified. Moreover, the novel rotor flux observer based on this analysis is also presented and the effectiveness of the observer has been verified by the simulation and experimental results.

• Journal of Sensor Science and Technology
• /
• v.22 no.1
• /
• pp.38-43
• /
• 2013

In this study, the artery's compliance model and the pulsation waveform model was proposed to estimate blood pressure without applying HPF (High Pass Filter) on signal measured by the oscillometric method. The method proposed in the study considered two ways of estimating blood pressure. The first method of estimating blood pressure is by comparing and analyzing changes in pulsation waveform's dicrotic notch region during each cardiac period. The second method is by comparing and analyzing morphological changes in the pulsation waveform during each cardiac period, which occur in response to the change in pressure applied on the cuff. To implement these methods, we proposed the compliance model and the pulsation waveform model of the artery based on hemodynamic theory, and then conducted various simulations. The artery model presented in this study only took artery's compliance into account. Then, a pulsation waveform model was suggested, which uses characteristic changes in the pulsation waveform to estimate blood pressure. In addition, characteristic changes were observed in arterial volume by applying artery's pulsation waveform to the compliance model. The pulsation waveform model was suggested to estimate blood pressure using characteristic changes of the pulsation waveform in the arteries. This model was composed of the sum of sine waves and a Fourier's series in combination form up to 10th harmonics components of the sinusoidal waveform. Then characteristic of arterial volume change was observed by inputting pulsation waveform into the compliance model. The characteristic changes were also observed in the pulsation waveform by mapping the arterial volume change in accordance with applied cuff's pressure change to the pulsation waveform's change according to applied pressure changes by cuff. The systolic and diastolic blood pressures were estimated by applying positional change of pulsation waveform's dicrotic notch region.

• The Research Journal of the Costume Culture
• /
• v.18 no.5
• /
• pp.1003-1016
• /
• 2010

The purpose of this study is to reorganize any rusty image including natural modeling characteristic presented from the natural phenomenon to certain patterns in order to create the fashion design that are valued in the expansion of independently expressional area and modeling art. As a method for research, the author analyzed the concept and characteristic for rust with a base of theoretical background by the documental research and realistic consideration, analyzed its modeling characteristic through domestic and overseas pictures, and e-documents as data, inspected the modeling activities of various categories that various images were adapted related to rust, looked into the concept of Digital Textile Printing and its producing procedure as an expressional method, and analyzed the examples of modern dress and its ornament making use of Digital Textile Printing. The conclusions of this study are as below. First, the rust occurred due to the natural phenomenon is the bond with different material like metal, each unique modeling characteristic occurs and harmony of various patterns has abundant aesthetic value. Second, the author could endowed sensible characteristic and speciality with works and could produce creative fashion design that painting, abstractive pattern and harmony of unique sense of colors are significant by using the image of rust, Third, to emphasize natural feeling of rust, the author could develop creative design that simple silhouette and impressive pattern look significant by reorganizing and applying rust according to repetition, increment, rhythm, contract, emphasis and harmony. Fourth, Digital Textile Printing method is used to induce visual effect by the expression of feels of rust, and the author could express the natural patterns, delicate expression for the feels of a material and unique design of emotion.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.4
• /
• pp.306-315
• /
• 2001

Our study is aimed at proposal of systematic verification method of molecular structure using measuring method of selective ionic determination and spectrometry on 34 kinds of surfactants such as sodium dodecyl sulfate(SDS) which are most widely used today. In the IR spectrum, unsaturated fatty acids reveal themselves by HC= at $3000{\sim}3020cm^{-1}$, and intensity of $720cm^{-1}$ depends on carbon length of alkyl group. Also ethylene oxide(EO) adducts exhibit weak characteristic bands by $-CH_{2}-CH_{2}-O$ at 1350, 1100 and $950cm^{-1}$. Isethionate can be distinguished from diester succinate by intensity ratio of 1740 and $1200cm^{-1}$ spectrums, the ratio of latter is close to 1 due to 2 carboxylate radical in diester succinate. Quaternary ammonium salts exhibit characteristic band of $C_{4}N^{+}$ at $1000-900㎝^{-1}$. In the case of dialkyl dimethyl ammonium salts in quaternary ammonium surfactants, the spectrum of $3000cm^{-1}$ by $N-CH_{3}$ collapses to a very weak band at $3020cm^{-1}$. In ammonium heterocyclic derivatives, pyridinium salts show characteristic bands at 1640 and $1460cm^{-1}$, while imidazolinium salts exhibit characteristic band at $1620-1610cm^{-1}$. In the characteristic spectrum at $1080-1050cm^{-1}$ on OH radicals of the alkyl esters, primary alcohol appears as weak band and the 2 bands show in almost same intensity when primary and secondary alcohols exist together in one molecule. Also, alkyl ester of polyhydric alcohols appears as various broad band.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.3
• /
• pp.451-460
• /
• 2006

While sludge settles down in a batch column, sludge concentration becomes high. Sludge concentration change is one of the most critical causes of the sludge settling velocity variation. Therefore, sludge concentration change causes sludge index to change. SVI is more sensitive than other sludge indexes to the change of sludge concentration. And if sludge-water interface has reached final height within 30minutes, SVI is not suitable for prediction of sludge settling characteristic, Therefore, SVIs of each sludge are, in some cases, different although each sludge has the same settling velocity. But SVI has been widely used to interpret sludge settling characteristic by a simple testing method. This work has two purposes. The first purpose is to predict sludge settling velocity by using sludge-water interface settling velocity. And the second purpose is to develop new sludge settling characteristic index to exactly interpret sludge settling characteristic by overcoming the limit of SVI.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.146-153
• /
• 2004

The goals of this study are to investigate the feasibility of the reference state approach in determining the generalized soil-water characteristic curve that is essential for characterization of unsaturated soil behavior. The soil-water characteristic curves are obtained from a number of specimens of fine-grained residual soils compacted with different void ratios. Based on the experimental test results, the feasibility of using the liquid limit state as the reference state for predicting the soil-water characteristic curve are verified. Finally, through the regression analysis of experimental data using the equation of Fredlund and Xing (1994), a reliable method is proposed to predict the generalized soil-water characteristic curve of fine-grained residual soils using the liquid limit state as the reference.

• Journal of computational fluids engineering
• /
• v.5 no.1
• /
• pp.43-59
• /
• 2000

Characteristic boundary conditions are discussed in conjunction with a flux-difference splitting formulation as modified from Roe's linearization. Details of how one can implement the characteristic boundary conditions which are made compatible with the interior point formulation are described for different types of boundaries including subsonic outflow and adiabatic wall. The validity of boundary conditions are demonstrated through computation of transonic airfoil, supersonic ogive-cylinder, hypersonic cylinder, and S-duct internal flows. The computed wall pressure distributions are compared with published experimental and computed data. Objectives of this paper are thus to give insight of formulation procedure of a flux-difference splitting method and to pave ways for other users to adopt present boundary procedure on their numerical methods.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.8
• /
• pp.693-698
• /
• 2007

A numerical method for accurate simulations of rotor aerodynamics is proposed. The numerical diffusion in the typically coarse grids away from the rotor blades is improved by implying a fourth-order of interpolation of local characteristic variables of the flow in the reconstruction stage of MUSCL approach in the framework of a finite volume formulation. In addition, different slope limiters are applied to the different characteristic fields, such as compressive limiters to linear characteristic fields to reduce the numerical dissipation whereas, diffusive limiters to nonlinear characteristic fields to increase numerical stability. Various exemplary problems related to the rotor aerodynamics applications are tested and the numerical results show a significant improvement in wake capturing capability. However, rotor aeroacoustic calculations show no meaningful difference over traditional MUSCL approach.

• Journal of Drive and Control
• /
• v.10 no.3
• /
• pp.27-33
• /
• 2013

Solenoid valve has used in various industrial field extensively. A solenoid valve has different size, shape and method of operation accordantly to industrial field. Many researchers study on kinds of solenoid valve such as flow rate, dynamic, magnetic field, valve shape and operating method. But the flow rate characteristic and dynamic response time performance on the diaphragm valve are not studied. This paper describes the flow rate characteristic and dynamic response time performance on the diaphragm valve. At first, the diaphragm valve is simulated in AMESim simulation tool. AMESim model found that an effect of valve performance depends on parameter. The parameter is the diaphragm orifice area. And the performance test bench confirms the effect in this parameter. Finally, it finds out the flow rate characteristic and dynamic response time performance on the diaphragm valve.