• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.363-365
• /
• 2002

The characteristic responds of load respect to various disturbances which can usually be occurred on actual power system is very important to analyze performance and to improve load with high-technology. The disturbance power supply is designed to provide wide range of power to testing load. This device uses PLC technology to dynamic characteristic experiment and CVVF to change frequency. Also this instrument includes data acquisition system to obtain reliable data from experiment.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.168-178
• /
• 2002

The purpose of this study is to develop an optimal performance design ova concrete median barrier using the design of experiment and crash simulation which is done by Pam-Crash, one of the commercial crash simulation software. A formula of characteristic value was suggested to obtain an optimal performance design considering all of von Mises stress, volume and acceleration at center of gravity of a heavy truck. An optimal design of a concrete median barrier was obtained by the analysis of variance based on design of experiment and crash simulation. A crash simulation with the optimal design was accomplished in order to verify the suitability of the suggested formula and the proper application of the design of experiment. The obtained optimal design was satisfied for a domestic design regulation of a concrete median barrier.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.193-196
• /
• 2001

This paper deals with the fabrication and characteristic experiment of a high-Tc superconducting(HTSC) power supply using by Bl-2223 tape. The purpose of this research is to apply real HTSC load. This system consists of two heaters, an electromagnet, a Bi-2223 solenoid and a Bi-2223 pancake load. In the experiment. 17sec and 8.5sec were used for pumping period. Mechanism of the superconducting switch is used for heater-trigger. In experiment, the pumping-current has reached about 1.2A.

• 전기학회논문지
• /
• 제57권4호
• /
• pp.596-602
• /
• 2008

This paper presents the dynamic characteristic analysis of Permanent Magnet Linear Synchronous Motor(PMLSM) according to variable load. In order to analyze dynamic characteristics, finite element method(FEM) was used for calculation of the parameter and the Matlab simulink was used for dynamic characteristic simulation. The measuring system of the dynamic characteristics was manufactured and the experiment results were compared with the simulation results.

• Composites Research
• /
• 제16권4호
• /
• pp.10-21
• /
• 2003

본 논문에서는 특성길이 결정을 위해 시편에 가해지는 하중과 내부 응력분포의 관계가 거의 선형적으로 변한다는 특성을 이용하여. 실험을 수행하지 않고 복합재 체결부 파손해석을 위한 특성길이를 결정할 수 있는 방법을 제안하였다. 제안된 방법을 사용할 경우 특성길이 결정을 위한 실험 없이도 실험값을 사용한 결과와 동일한 압축특성길이를 얻을수 있음을 보였다. 압축특성길이 결정에서와 마찬가지로 실험 없이 인장특성길이를 결정하기 위해, 기존의 방법에서와 달리, 인장특성길이의 정의를 위해 사용하는 적층판의 강도값을, 원공이 없는 적층판의 값이 아닌 원공을 가진 적층판의 값을 사용하였다. 유한요소해석은 MSC/NASTRAN을 이용하였고, 체결재와 복합재의 접촉부는 접촉면 요소를 사용하여 모델링하였다. 제안된 방법으로 해석한 복합재 체결부의 파손하중은 Graphite/Epoxy 복합재료 체겯부의 실험 견과와 매우 잘 일치함을 확인하였다

• 토지주택연구
• /
• 제9권4호
• /
• pp.33-42
• /
• 2018

As a radiant heating panel gets more popularity, the need to study on evaluation method of thermal output of the panel also becomes increasing. Generally, the chamber using method is applied to evaluate the thermal output through an experiment. However, the chamber using method cannot be used due to the limitations on space and cost. EN1264 addresses the test equipment to evaluate the thermal output by using simpler experimental setup, and introduces application method in detail. However, there is not enough description of control methods to meet the experiment condition, and it is difficult to meet this when practical experiment. Therefore, this paper analysed the control error factors of when the thermal output experiment is performed. When EN1264 method is applied to evaluate the thermal output of the radiant floor heating panel, the error factor which is caused by the characteristic of test equipment cannot be removed by the control methods of chamber using method. In addition, the error factor can be occurred at the element which is located out of the control system. These possible error factors are defined as the characteristic error factors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.110-112
• /
• 2003

Electric control of eddy coupling offers many new possibilities in process control and other industrial control applications. And a form of speed control for the load is affected for a system driven by costant frequency induction motor. This paper analysis speed-torque characteristic of the eddy-current coupling by using the 3-dimensional analytical method. Characteristic experiment is put into operation for the claw pole type eddy current coupling. Design procedure is presented based on the analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.220-225
• /
• 2003

Recent issue of optical actuator is applying to mobile device. It leads actuator to become smaller than conventional type. This paper proposes the design of micro actuator plate spring and analysis of its vibration characteristic. Considering natural frequency of spindle motor, 1st and 2nd eigenfrequency of micro actuator must avoid its natural frequency. First, magnetic circuit is designed by using fine pattern coil and magnetic force is acquired by simulation program. Then, concept design is achieved by topology optimization. From concept design, micro actuator plate spring is embodied through DOE(design of experiment). Finally, considering vibration characteristic simultaneously, optimal plate spring design is determined by RSM(response surface method).

• 전기학회논문지P
• /
• 제54권2호
• /
• pp.101-107
• /
• 2005

The reduced power quality due to some of disturbances on power system has great influence on the efficient and life of load for bad with serious economic loss. The response of load about disturbance needs to analysis quantitatively in detail to improve load characteristics. In this research, a power supply device is developed to supply disturbed power similar to that of power system. The developed device can output a voltage and frequency from 180[V] to 240[V], 55[Hz] to 65[Hz] respectively. The most outstanding feature of this device is a function to be performed steady and dynamic state characteristic experiment on load or appliances. Also, this device is designed to include high accuracy ouput and simple measurement.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.186-193
• /
• 2014

This paper presents characteristic analysis of underwater bearing for canned type electric water pump. Characteristic analysis of underwater bearing was performed using self-developed performance tester, which capable of torque change, noise change, motor speed change and abrasion loss test with respect to temperature change of underwater bearing. The performance tester can be monitored in real time by designing the control unit using the Labview program. The performance experiment was performed through comparison of the silicon carbide (SIC) and the carbon bearing. From the experiment results, performance of SIC bearing was better than carbon bearing at the abrasion and temperature experiment.