• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.558-563
• /
• 2005

In this paper, the effect of volute area distribution on the performance characteristic curve of a centrifugal pump were numerically studied using a commercial CFD code. To reduce the shutoff head, maintaining head and efficiency at a design flow rate, the flat head-capacity characteristic curves in which the head varies only slightly with capacity from shutoff to design capacity are frequency required. In order to control the shutoff head of a pump, several volute area distributions were proposed as a main parameter with the same impeller geometry. The calculation results show that the characteristic curve of a centrifugal pump can be controlled by modifying the area distribution with the same volute outlet area.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.362-369
• /
• 2005

Studying unsaturated soil mechanics, determination of soil water characteristic curve and permeability equation is an essential factor but it is not easy. In this research a new testing apparatus was developed to determine soil water characteristic curve and permeability equation. The testing to get saturated permeability coefficients and soil water characteristic curves for two soils was performed by using the developed testing apparatus. First, a saturated permeability testing was performed and then the testing to get soil water characteristic curve of a drying process was performed. Next, the testing to get soil water characteristic curve of a wetting process was performed. Testing results showed hysteresis phenomena between soil water characteristic curve of a drying process and soil water characteristic curve of a wetting process. The permeability equations were determined by a theoretical method where a saturated permeability coefficient and a soil water characteristic curve were used.

• 충청수학회지
• /
• 제15권2호
• /
• pp.1-12
• /
• 2003

L. H. Encinas, A. J. Menezes, and J. M. Masque in [2] proposed a classification of isomorphism classes of hyperelliptic curve of genus 2 over finite fields with characteristic different from 2 and 5. Y. Choie and D. Yun in [1] obtained for the number of isomorphic classes of hyperelliptic curves of genus 2 over $F_q$ using direct counting method. In this paper we will classify the isomorphism classes of hyperelliptic curves of genus 2 over $F_{2^n}$ for odd n, represented by an equation of the form $y^2+a_5y=x^5+a_8x+a_{10}(a_5{\neq}0)$.

• Journal of the Korean Data and Information Science Society
• /
• 제14권4호
• /
• pp.915-927
• /
• 2003

This paper is the generalization of the modified two-level skip-lot sampling plan(MTSkSP1) to n-level. The general formulas of the operating characteristic(OC) function, average sample number(ASN) and average outgoing quality(AOQ) for the plan are derived using Markov chain properties. The operating characteristic curves, average sample numbers and average outgoing qualities of a reference plan, modified two-level, three-level and five-level skip-lot sampling plans are compared.

• 대한수학회지
• /
• 제59권6호
• /
• pp.1171-1184
• /
• 2022

We study the real-analytic continuation of local real-analytic solutions to the Cauchy problems of quasi-linear partial differential equations of first order for a scalar function. By making use of the first integrals of the characteristic vector field and the implicit function theorem we determine the maximal domain of the analytic extension of a local solution as a single-valued function. We present some examples including the scalar conservation laws that admit global first integrals so that our method is applicable.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.105-111
• /
• 2010

In the field of 'Human Vibration', it has been interested subjects to make equal sensation curves related to translational and rotational direction of whole-body, hand-transmitted and head-transmitted vibration, etc. When we consider the vibration of a vehicle, the main factor is vertical whole-body vibration. Until now, most of equal sensation curves used to derive frequency weighting function had been made using Western people. However, because of the inherent differences (for example, characteristic and shape of body parts, muscular and cellular tissue) between the Western people and the Oriental people, equal sensation curves based on Oriental people might be required. Also, the weight differences between the samples which consist of average-weighted and over-weighted group might cause the difference of equal sensation curves. So, in this study, 20 male Korean people were used to find equal sensation curves subject to vertical whole-body vibration on seated posture. Among 20 males, an over weighted group consisted of 10 male persons and an average weighted group was the others. Integrating and analyzing the data of two groups, some of non-parametric tests such as 'The Wilcoxon Signed Rank Test' and 'The Mann Whitney U test' were used.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1321-1327
• /
• 2019

본 논문에서는 GF(p) 상에서 모듈러 제곱근 (MSQR) 연산의 효율적인 하드웨어 구현에 대해 기술한다. MSQR 연산은 타원곡선 기반의 EC-ElGamal 공개키 암호를 위해 평문 메시지를 타원곡선 상의 점으로 매핑하기 위해 필요하다. 본 논문의 방법은 NIST 표준으로 규정된 5가지 크기의 GF(p) 타원곡선을 지원하며, 192-비트, 256-비트, 384-비트 그리고 521-비트 크기의 Kobliz 곡선과 슈도 랜덤 곡선들은 모듈러 값의 특성을 기반으로 오일러 판정법을 적용하고, 224-비트 크기의 경우에는 Tonelli-Shanks 알고리듬을 간략화시켜 적용하였다. 제안된 방법을 ECC 프로세서의 32-비트 데이터 패스를 갖는 유한체 연산회로와 메모리 블록을 이용하여 구현하였으며, FPGA 디바이스에 구현하여 하드웨어 동작을 검증하였다. 구현된 회로가 50 MHz 클록으로 동작하는 경우에, 224-비트 슈도 랜덤 곡선의 경우에는 MSQR 계산에 약 18 ms가 소요되고, 256-비트 Kobliz 곡선의 경우에는 약 4 ms가 소요된다.

• Journal of applied mathematics & informatics
• /
• 제13권1_2호
• /
• pp.413-424
• /
• 2003

L. H Encinas, A. J. Menezes and J. M. Masque in [3] proposed a classification of isomorphism classes of hyperelliptic curve of genus 2 over finite fields with characteristic different from 2 and 5. Y. Choie and D. Yun in [2] obtained the number of isomorphic classes of hyperelliptic curves of genus 2 over $F_{2-}$ using direct counting method. We have obtained isomorphism classes of hyperelliptic curves of genus 2 over $F_{2n}$ for odd n, represented by an equation of the form $y^2$ + $a_{5}$ y = $x^{5}$ + $a_{8}$ x + $a_{10}$ ( $a_{5}$ $\neq$0) [1]. In this paper we characterize hyperelliptic curves of genus 2 over $F_{2n}$ for even n, represented by an equation of the form $y^2$ + $a_{5}$ y = $x^{5}$ + $a_{5}$ x + $a_{10}$ ( $a_{5}$ $\neq$0).>0).

• Journal of Welding and Joining
• /
• 제20권4호
• /
• pp.510-516
• /
• 2002

Recently the laser welding technology has been applied increasingly for the automotive bodies. But the lap joint laser welding for 3 dimensional automotive body is new while the butt joint laser welding is well known as the tailored blank technology. In this study, the process window was found for the full penetration welding of the lap joint of the 1mm-thick high strength steel sheets. The limit curves and characteristic curves were suggested to define the boundaries and the contour lines in a space of the welding speed and the gap size. The characteristics of the weld sectional geometry were used to determine the limit curves. They are bead width, penetration depth and sectional area. After the observed data was analysed carefully, it was noticed that there was a transition point at which the sectional shape was changed and the bead area jumped as the welding speed was increased. Also a new concept of 'input energy Per volume' was suggested to distinguish the difference at the transition Point. The difference of sectional areas at the transition point can be related to the dynamic keyhole phenomena.

• 한국산림과학회지
• /
• 제1권1호
• /
• pp.1-6
• /
• 1962

Hysteresis Loops explaining relationship between E.M.C. and relative humidities of some commercial woods grown in Korea which have not been inspected were studied. Because of Hysteresis Loops are differently constructed among species, the loop of each species is necessary to plot in order to apply for seasoning of wood directly. Therefore relationship between E.M.C. and relative humidities, and Hysteresis Loops were inspected and compaired between species. Small sized ($3{\times}3{\times}1.3cm$) twenty pieces of wood blocks for each species were taken from log which cut few years ago and already attained air dry condition. Five relative humidity conditions (9, 32, 58, 82 and 91%) were controlled to keep constant in the cabinet under temperature $25^{\circ}C$. According to the results, it is concluded that there are considerable differences on the E.M.C. among two types of sorption, eight species and five different relative humidity conditions. Adsorption and desorption curves are showing characteristic Sigmeid Curves and desorption curves always are on the adsorption curves at all compaired species. Average hysteresis ratio is 0.75, the constructed loops of tested species are showing open hysteresis generally and flatten loop constructions of Qnerets aemitissima and Robinia pseudoaeaeia of hard wood species than other soft wood are considered to be established by differences of stability between hard and soft wood.