• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.5
• /
• pp.236-239
• /
• 2006

A wireless MAC scheduler that provides a high level of quality-of-service (QoS) for video-on-demand (VOD) applications while achieving a reasonable level of system throughput is proposed. The proposed scheduler considers both channel qualities of mobiles and the urgency of real-time packets coming from VOD applications in a cross-layer approach between application and MAC layers.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.538-541
• /
• 1999

MPEG-2 AAC(Advanced Audio Coding) is the most advanced coding scheme available for high quality audio coding. This MPEG-2 AAC audio Standard allows for ITU-R ‘indistinguishable’ quality according to at data rates of 320 kb/s for five full-bandwidth channel audio signals. The compression ratio is around a factor of 1.4 better compared to MPEG Layer 3, you get the same quality at 70% of the bitrate. This paper suggest optimization method for MDCT/IMDCT (Modified Discrete Cosine Transform/Inverse Modified Discrete Cosine Transform) in Encoder and Decoder for AAC.

• Journal of the Optical Society of Korea
• /
• v.8 no.3
• /
• pp.99-103
• /
• 2004

This paper describes the optimal design of an AWG spectrum to meet various specifications and improve some physical parameters. The objective function is the norm of the difference between design parameters and target values. To obtain the design parameters, the Fourier model is employed and the design variables arc spacing of array waveguide, width of array waveguide, optical path difference, and focal length. The (1+1) Evolution Strategy is employed as the optimization tool. The optimization procedure is applied to a 16-channel AWG and the optimized design variables will considerably improve the system performance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.5 s.236
• /
• pp.707-715
• /
• 2005

In this work, Scalar Passive code in Lattice Boltzmann Method is employed to simulate two-phase flow of low Reynolds number in a micro-channel. The mixing characteristics in a micro-channel is a function of Peclet number. The mixing length increases with the Peclet number. It is found that with the inclusion of static elements at the channel, rapid mixing of two liquids can be achieved, as shown by the results of computer simulations. The enhancement in mixing performance is thought to be caused by the generation of eddies and by lateral velocity component when the mixture flows past static elements. The results indicate that the size of static element has more effect on the mixing than the number of static element.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.137-140
• /
• 2007

We consider the optimum air flow channel design for DMFC's in the present study. The effect of pressure drop across the inlet and outlet of a stack on the performance of a DMFC is the optimization of such geometric parameters is crucial to minimize the parasitic power usage by the auxiliary devices such as fuel pumps and blowers. In this paper, we present how the pressure drop control can optimize the driving point of a DMFC stack. Further, we show how the optimal fuel utilization ratio can be achieved, not degrading the performance of DMFC stacks. Overall, we discuss how the flow channel design affects the selection of balance of plant(BOP) components, the design of DMFC systems and the system efficiency.

• Journal of Communications and Networks
• /
• v.10 no.1
• /
• pp.38-43
• /
• 2008

In this paper, adaptive channel borrowing approach fuzzy neural networks for load balancing (ACB-FNN) is presented to maximized the number of served calls and the depending on asymmetries traffic load problem. In a wireless network, the call's arrival rate, the call duration and the communication overhead between the base station and the mobile switch center are vague and uncertain. A new load balancing algorithm with cell involved negotiation is also presented in this paper. The ACB-FNN exhibits better learning abilities, optimization abilities, robustness, and fault-tolerant capability thus yielding better performance compared with other algorithms. It aims to efficiently satisfy their diverse quality-of-service (QoS) requirements. The results show that our algorithm has lower blocking rate, lower dropping rate, less update overhead, and shorter channel acquisition delay than previous methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.812-814
• /
• 2015

In this Paper, we proposed optimization of system performance, power splitting protocols applied to relay in the cooperative communication undergo co-channel interference. When relay adjust power distribution factors undergo co-channel interference, it is possible to optimize and maximize the channel capacity of the receiver. Because of energy haversting, interfence transfer to new power source. If we found optimal power levels, to solve inability in system, and to increase the efficiency of the network.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.354-355
• /
• 2008

The sensitivity and sensing margin of SOI(silicon on insulator) nano-wire BioFET(field effect transistor) were investigated by using back-gate bias. The channel conductance modulation was affected by doping concentration, channel length and channel width. In order to obtain high sensitivity and large sensing margin, low doping concentration, long channel and narrow width are required. We confirmed that the electrical sensing by back-gate bias is effective method for evaluation and optimization of bio-sensor.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2652-2657
• /
• 2008

An analytical study was carried out on the flow resistance of tree-shaped channel flow architectures, based on the principle of the constructal law of evolutionary increase of flow access through the generation of better flowing configurations with two diameters in the square domain. Two types of tree-shaped configurations are optimized. The minimized global flow resistance decreases definitely as the system size, N, increases. And the best channel configurations among the first construct and second construct as a result of regarding pressure drop was selected. We also show that the freedom to morph the design and to increase its performance can be enhanced by using tree-tree configurations with $2^{nd}$ construct when N is greater than 18.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2666-2671
• /
• 2007

This work presents microchannel heat sink shape optimization procedure using Kriging method. Design variables relating to microchannel width, depth and fin width are selected, and thermal resistance has been taken as objective function. Design points are selected through a three-level fractional factorial design of sampling method. Navier-Stokes and energy equations for laminar flow and conjugate heat transfer are solved at these design points using a finite volume solver. Solutions are carefully validated with experimental results. Using the numerically evaluated objective function, a surrogate model (Kriging) is constructed and optimum point is searched by sequential quadratic programming. The process of shape optimization greatly improves the thermal performance of microchannel heat sink under constant pumping power.