• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.738-745
• /
• 2009

Underwater acoustic communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes receive signal to make error floor. In this paper, we propose the underwater communication system using various channel coding schemes such as RS coding, convolutional code, turbo code and concatenated code for overcoming the multipath effect in underwater channel. As shown in simulation results, characteristic of multipath error is similar to that of random error. So interleaver has not effect on error correcting. For correcting of error floor by multipath, it is necessary to use strong channel codes like turbo code. Turbo code is one of the iterative codes. And the performance of concatenated codes including RS code has better performance than using singular channel codes.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4338-4347
• /
• 2022

The CUPID code was developed and is continuously updated in KAERI. Verification and validation (V&V) is mainly done for light water reactors (LWRs). This paper describes a benchmarking of the detailed mesh level compared with sub-channel level for application to pressurized heavy water reactors (PHWRs), even though component scale comparison for the PHWR moderator system was done once before. We completed a sub-channel level comparison between the CUPID code and the ASSERT code and a CUPID code analysis. Because the ASSERT code has already been validated with numerous experiments, benchmarking with the ASSERT code will offer us more trust on the CUPID code. The target channel has high power and thus high pressure deformation. The high power channel tends to have a high possibility of critical heat flux (CHF), because a high void fraction and quality in channel exit region appear. In this research, after determining the reference grid and T/H model, we compared the sub-channel level results of the CUPID code with those of the ASSERT code.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권3호
• /
• pp.97-105
• /
• 2015

A navigation signal based on orthogonal tiered polyphase code was proposed. For the proposed signal, tiered polyphase code was used as the code of a pilot channel. Tiered polyphase code is a complex number type code, and thus the pilot channel and data channel were separated using the Walsh code which makes the correlation between different codes become 0. The results of the simulation indicated that the correlation characteristics and signal acquisition performance of the proposed signal were identical to those of tiered polyphase code, and that the disadvantage of tiered polyphase code could be supplemented through a data channel in terms of signal tracking.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권7호
• /
• pp.3156-3167
• /
• 2020

One drawback of polar codes is that they are not universal, that is, to achieve optimal performance, different polar codes are required for different kinds of channel. This paper proposes a polar code construction scheme for Nakagami-m fading channel. The scheme fully considers the characteristics of Nakagami-m fading channel, and uses the optimized Bhattacharyya parameter bounds. The constructed code is applied to an orthogonal frequency division multiplexing (OFDM) system over Nakagami-m fading channel to prove the performance of polar code. Simulation result shows the proposed codes can get excellent bit error rate (BER) performance with successive cancellation list (SCL) decoding. For example, the designed polar code with cyclic redundancy check (CRC) aided SCL (L = 8) decoding achieves 1.1dB of gain over LDPC at average BER about 10^-5 under 4-quadrature amplitude modulation (4QAM) while the code length is 1024, rate is 0.5.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.297-300
• /
• 2001

Turbo code shows the great performance near Shannon limit on AWGN channel. Mainly, turbo code has been studied and designed for wireless digital communications. There are recent studies that applies turbo decoder on magnetic recording. Because of the limited capacity of magnetic storages, high rate turbo code is used for magnetic storages. This paper presents some issues on implementing high rate turbo code and structures for designing turbo decoder

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.277-280
• /
• 2003

In this paper, we analyze the performance of transmitter and receiver of W-CDMA system using the channel coding and space time code in downlink over ITU-R realistic channel model. We can improve the reliability of communications and increase the data rate by channel coding, and we can get a diversity gain by using the space time code over fading channels. We also apply the RAKE receiver to improve tile performance in multi-Path fading channel environment.

• 한국음향학회지
• /
• 제27권6호
• /
• pp.286-295
• /
• 2008

수중에서의 통신은 해수면과 해저면 등에 의한 신호의 반사가 생겨 다중경로 현상이 발생한다. 이러한 다중경로의 영향으로 신호는 왜곡되고 원활한 수신을 방해하게 된다. 이에 각종 통신시스템에서 적용되고 있는 여러 가지 채널 부호 방법을 모델링된 수중통신채널에 적용하여 그 성능을 확인하였다. 그 결과 다중경로에 의한 오류의 특성은 랜덤오류의 특성을 가지기 때문에 인터리버의 효과는 거의 볼 수 가 없으며, 수중채널에서 다중경로에 의해 야기된 오류마루 현상을 극복하기 위해서는 LDPC 부호와 같은 강력한 오류 정정 부호가 요구되며, RS 부호등을 연접하여 사용할 경우 더욱 우수한 성능을 보이는 것을 확인할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.157-158
• /
• 2008

This paper examines an adaptive coding scheme for flat fading channels to maximize the average code rate of a coded system. The proposed adaptation technique is employed by using the required free distance of a rate compatible code depending on the channel realization. First, the system will calculate the required free distance based on the instantaneous channel gain. Based on this channel gain we will select a set of convolution code to optimize the code rate with a certain performance requirement. Simulation results show that our proposal can achieve a higher code rate.

• Journal of Electrical Engineering and information Science
• /
• 제1권1호
• /
• pp.23-28
• /
• 1996

In this series of two papers, adaptive code rate change schemes in DS-SSMA systems are proposed. In the proposed schemes the error correcting code rate is changed according to the channel states. Two channel states having significant effects on the bit error probability are considered: one is the effective number of users considered in Part 1, and the other is the fading environment considered in Part 2. These channel states are estimated based on retransmission requests. The criterion for the change of the code rate is to maximize the throughput under given error bound. Simulation results show that we can transmit maximum amount of information if we change the code rate based on the channel states.

• 정보와 통신
• /
• 제12권6호
• /
• pp.88-100
• /
• 1995

본 고에서는 디지털 위성방송 시스템의 구성요소중 channel부의 구조 및 기능분석을 국내 디지털 DBS를 기준으로 설명하였다. channel부는 channel coding과 modulation 기능을 수행한다. Channel coding은 Reed Solomon code, interleaving, convolutional code를 연집하여 사용하고, modulation은 QPSK와 raised cosine pulse shaping을 한다. 수신기의 channel부는 antenna, LNB, tuner, QPSK 복조기, Viterbi, deinterleaver, RS decoder로 구성되어있다.