• Journal of Broadcast Engineering
• /
• v.26 no.4
• /
• pp.429-440
• /
• 2021

With the recent development of deep convolutional neural network learning, deep learning techniques applied to single image super-resolution are showing good results. One of the existing deep learning-based super-resolution techniques is RDN(Residual Dense Network), in which the initial feature information is transmitted to the last layer using residual dense blocks, and subsequent layers are restored using input information of previous layers. However, if all hierarchical features are connected and learned and a large number of residual dense blocks are stacked, despite good performance, a large number of parameters and huge computational load are needed, so it takes a lot of time to learn a network and a slow processing speed, and it is not applicable to a mobile system. In this paper, we use the residual dense structure, which is a continuous memory structure that reuses previous information, and the residual dense channel attention block using the channel attention method that determines the importance according to the feature map of the image. We propose a method that can increase the depth to obtain a large receptive field and maintain a concise model at the same time. As a result of the experiment, the proposed network obtained PSNR as low as 0.205dB on average at 4× magnification compared to RDN, but about 1.8 times faster processing speed, about 10 times less number of parameters and about 1.74 times less computation.

• International Journal of Contents
• /
• v.14 no.1
• /
• pp.39-44
• /
• 2018

Today, cars have developed into intelligent automobiles that combine advanced control equipment and IT technology to provide driving assistance and convenience to users. These vehicles provide infotainment services to the driver, but this does not improve the safety of the driver. Accordingly, V2X communication, which forms a network between a vehicle and a vehicle, between a vehicle and an infrastructure, or between a vehicle and a human, is drawing attention. Therefore, various techniques for improving channel estimation performance without changing the IEEE 802.11p standard have been proposed, but they do not satisfy the packet error rate (PER) performance required by the C-ITS service. In this paper, we analyze existing channel estimation techniques and propose a new channel estimation scheme that achieves better performance than existing techniques. It does this by applying the updated matrix for the data pilot symbol to the construct data pilot (CDP) channel estimation scheme and by further performing the interpolation process in the frequency domain. Finally, through simulations based on the IEEE 802.11p standard, we confirmed the performance of the existing channel estimation schemes and the proposed channel estimation scheme by coded PER.

• International journal of advanced smart convergence
• /
• v.9 no.2
• /
• pp.68-75
• /
• 2020

Non-orthogonal multiple access (NOMA) has gained the significant attention in the fifth generation (5G) mobile communication, which enables the advanced smart convergence of the artificial intelligence (AI), the internet of things (IoT), and many of the state-of-the-art technologies. Recently, correlated superposition coding (SC) has been proposed in NOMA, to achieve the near-perfect successive interference cancellation (SIC) bit-error rate (BER) performance for the stronger channel users, and to mitigate the severe BER performance degradation for the weaker channel users. In the correlated SC NOMA scheme, the stronger channel user BER performance is even better than the perfect SIC BER performance, for some range of the power allocation factor. However, such excessively good BER performance is not good for the user-fairness, i.e., the more power to the weaker channel user and the less power to the stronger channel user, because the excessively good BER performance of the stronger channel user results in the worse BER performance of the weaker channel user. Therefore, in this paper, we propose the power splitting to establish the user-fairness between both users. First, we derive a closed-form expression for the power splitting factor. Then it is shown that in terms of BER performance, the user-fairness is established between the two users. In result, the power splitting scheme could be considered in correlated SC NOMA for the user-fairness.

• Structural Engineering and Mechanics
• /
• v.90 no.2
• /
• pp.117-125
• /
• 2024

This article presents the behaviour and design of cold-formed steel (CFS) web-stiffened lipped channel beams that primarily fail owing to the buckling interaction of distortional and global buckling modes. The incorporation of an intermediate stiffener in the web of the lipped channel improved the buckling performance leads to distortional buckling at intermediate length beams. The prediction of the strength of members that fail in individual buckling modes can be easily determined using the current DSM equations. However, it is difficult to estimate the strength of members undergoing buckling interactions. Special attention is required to predict the strength of the members undergoing strong buckling interactions. In the present study, the geometric dimensions of the web stiffened lipped channel beam sections were chosen such that they have almost equal distortional and global buckling stresses to have strong interactions. A validated numerical model was used to perform a parametric study and obtain design strength data for CFS web-stiffened lipped channel beams. Based on the obtained numerical data, an assessment of the current DSM equations and the equations proposed in the literature (for lipped channel CFS sections) is performed. Suitable modifications were also proposed in this work, which resulted in a higher level of design accuracy to predict the flexural strength of CFS web stiffened lipped channel beams undergoing distortional and global mode interaction. Furthermore, reliability analysis was performed to confirm the reliability of the proposed modification.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.41-46
• /
• 2000

In this paper, we analyze the performance of W-CDMA systems using turbo code in the wideband multipath channel. The strength of each multipath component is assumed to be Rayleigh distributed. Turbo codes of long block sizes have been known to show very good performance in a AWGN channel. Recently, turbo codes of short block sizes suitable for real time communication systems have attracted a lot of attention. Thus, in this paper we consider the turbo code of 1/3 code rate and short frame size of 192 bits in wideband mobile multipath channel. We analyze the performance of W-CDMA systems with 10MHz bandwidths in the case of employing RAKE receiver with not only MRC diversity but also turbo code.

• Korean Management Science Review
• /
• v.17 no.3
• /
• pp.73-95
• /
• 2000

In Korea, the distribution channel for agricultural products is notorious for its complexity and ineffectiveness. In this sense, the Agricultural Cooperative has tried to clarify the distribution channel and reduce its length. However, there still exist much room for improvements. The Internet shopping mall specific for agricultural product, therefore, is drawing much attention because it can reduce the length of distribution channel drastically and improve effectiveness from the distribution perspective. To test the validity of such Internet-driven shopping mall, we gathered questionnaire data from the Internet based Hannaro Shopping Mall which is run directly by the Agricultural Cooperative. We performed experiments respectively for the two groups of operating personnel and consumers. Experimental results showed that several important factors can be identified which are significant statistically and deemed to have meaningful relationship with performance variables. Our results also showed that the Internet shopping mall has a great potential for improving the effectiveness of the distribution channel of the agricultural products.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.288-298
• /
• 2016

Proactive relay selection in cognitive radio networks has recently received considerable attention. However, its outage probability analysis is limited to partially-identical fading distributions, uncorrelation among received signal-to-noise ratios (SNRs), and no direct channel. This paper completes this literature deficiency by generalizing the existing analysis for non-identical fading distributions, correlation among received SNRs, and with direct channel. Numerous results demonstrate that relay selection with a direct channel achieves a higher diversity order and superior performance than that without a direct channel at virtually no cost of power and bandwidth. Further, proactive relay selection suffers an error floor at either a large maximum transmit power or large maximum interference power; however, the error floor level can be significantly remedied with an increase in the number of relays.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.5
• /
• pp.9-17
• /
• 2013

Preferred combinations of illuminance and color temperature of lighting depend on daily living activities. We investigated whether the illumination stimuli of LED lighting can enhance attention and relaxation level by controlling color temperature and illuminance level according to activities. Illuminations and color temperatures of LED flat panels are controlled in accordance with activities such as office work and resting. The attention and relaxation level under the task specific lightings are compared with those under normal lighting condition. Single channel EEG signals from the NeuroSky's Mindset are used to estimate attention and relaxation level of human subjects under different lighting conditions. Experiment results show that high color temperature with high illuminance of LED lightings (6600K, 800lx) shows improved attention level compared with conventional lighting conditions (4000K, 500lx).

• Knowledge Management Research
• /
• v.16 no.4
• /
• pp.109-132
• /
• 2015

We examine offline and online channel sales of experience goods, and compare and contrast the sales patterns of existing products and new products between channels. To this end, we obtain the channel-specific time-series sales data from the leading company selling beauty products, both offline and online. By applying the Vector Autoregressive Model, we empirically find out how the relationship between existing products and new products changes between the shopping channels. Our empirical findings are as follows. First, the sales effects from existing products to new products are significantly positive at both offline and online channels, and this positive effect is greater in the offline channel than in the online channel. Second, the influence of new products on existing products is more positive in the offline channel than in the online channel. Third, the impact of existing products sales on new products sales is greater than that of new products on existing products. Lastly, the inertia effect, the effect within the same shopping channel and the same selling product, is significantly positive in the offline channel but not in the online channel, and this asymmetric inertia effect emerges as we focus on experience goods. Moreover, the impulse response function analysis provides the three important implications. First, companies should pay attention to the same channel but different types of products. Second, the offline channel is more vulnerable to market shock than the online channel. Third, new products sales vary by existing products sales to the greater extent, compared to the opposite relationship. We believe our study contributes theoretically and practically to the fields of marketing and knowledge management.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.443-450
• /
• 2017

Nowadays, Power Line Communication (PLC) is gaining high attention from industry and electric supply companies for the services like demand response, demand side management and Advanced Metering Infrastructure (AMI). The reliable services to consumers using PLC can be provided by utilizing an efficient PLC channel for which sophisticated channel modeling is very important. This paper presents characterization of a Low Voltage (LV) access network for Narrowband Power Line Communications (NB-PLC) using transmission line (TL) theory and a Simulink model. The TL theory analysis not only includes the constant parameters but frequency selectivity is also introduced in these parameters such as resistance, conductance and impedances. However, the proposed Simulink channel model offers an analysis and characterization of capacitive coupler, network impedance and channel transfer function for NB-PLC. Analysis of analytical and simulated results shows a close agreement of the channel transfer function. In the absence of a standardized NBPLC channel model, this research work can prove significant in improving the efficiency and accuracy of NB-PLC communication transceivers for Smart Grid communications.