• 제목/요약/키워드: Channel Splitting

검색결과 69건 처리시간 0.031초

3차원 천음속 원심압축기 디퓨저 성능연구 (Performance Analysis of Three-Dimensional Transonic Centrifugal Compressor Diffuser)

  • 김상덕;송동주
    • 한국유체기계학회 논문집
    • /
    • 제2권1호
    • /
    • pp.64-72
    • /
    • 1999
  • CSCM upwind flux difference splitting compressible Navier-Stokes method has been used to predict the transonic flows in a centrifugal compressor diffuser. The modified cyclic. TDMA and the mass flux boundary conditions were used as boundary conditions of the diffuser analysis. Broad flow separation on the suction surface near the hub and shroud was observed from the results of the mass flow rates 5.8, 6.0 and 6.2kg/s at 27000 rpm. The three-dimensional flow analysis predicted successfully that the static pressure increased and the total pressure decreased through the flow passage of the channel diffuser when compared to two-dimensional analysis due to the strong effect of the three-dimensional flow. The mass averaged loss coefficients and pressure coefficients were also studied.

  • PDF

Nano-structuring of Transparent Materials by Femtosecond Laser Pulses

  • Sohn, Ik-Bu;Lee, Man-Seop;Chung, Jung-Yong;Cho, Sung-Hak
    • Journal of the Optical Society of Korea
    • /
    • 제9권1호
    • /
    • pp.1-5
    • /
    • 2005
  • Using tightly focused femtosecond laser pulses, we produce an optical waveguide and optical devices in transparent materials. This technique has the potential to generate not only channel waveguides, but also three-dimensional optical devices. In this paper, an optical splitter and U-grooves, which are used for fiber alignment, are simultaneously fabricated in a fused silica glass using near-IR femtosecond laser pulses. The fiber aligned optical splitter has a low insertion loss, less than 4㏈, including an intrinsic splitting loss of 3㏈ and excess loss due to the passive alignment of a single-mode fiber. Finally, we demonstrate the utility of the femtosecond laser writing technique by fabricating gratings at the surface and inside the silica glass.

Hot-Pressing Effects on Polymer Electrolyte Membrane Investigated by 2H NMR Spectroscopy

  • Lee, Sang Man;Han, Oc Hee
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권2호
    • /
    • pp.510-514
    • /
    • 2013
  • The structural change of Nafion polymer electrolyte membrane (PEM) induced by hot-pressing, which is one of the representative procedures for preparing membrane-electrode-assembly for low temperature fuel cells, was investigated by $^2H$ nuclear magnetic resonance (NMR) spectroscopy. The hydrophilic channels were asymmetrically flattened and more aligned in the membrane plane than along the hot-pressing direction. The average O-$^2H$ director of $^2H_2O$ in polymer electrolyte membrane was employed to extract the structural information from the $^2H$ NMR peak splitting data. The dependence of $^2H$ NMR data on water contents was systematically analyzed for the first time. The approach presented here can be used to understand the chemicals' behavior in nano-spaces, especially those reshaping and functioning interactively with the chemicals in the wet and/or mixed state.

압축 영상의 강건한 전송을 위한 효과적인 에러 내성 엔트로피 부호화 (The Efficient Error Resilient Entropy Coding for Robust Transmission of Compressed Images)

  • 조성환;김응석;김정식
    • 한국산학기술학회논문지
    • /
    • 제7권2호
    • /
    • pp.206-212
    • /
    • 2006
  • 많은 영상과 비디오 압축 알고리듬들은 입력 영상을 블록으로 나눈 후, 각 블록 데이터로부터 가변 길이 부호 스트림을 생성한다. 가변 길이 부호를 에러 발생 환경 채널에 연속적으로 전송할 경우, 해당 부호화기들은 채널 에러에 많은 영향을 받는다. 따라서 대부분의 영상과 비디오 기법에서는 채널 에러에 대하여 비트 스트림을 보호하기 위한 방법으로 디코딩의 시작 위치를 지시하기 위한 재동기(resynchronization) 마커로 여분의 제어 비트들을 추가한다. 이런 여분의 추가 정보를 감소시키기 위한 기법으로 에러 내성 엔트로피부호화(EREC)가 널리 알려져 있다. 본 논문에서는 추가되는 여분의 제어 비트를 감소하기 위해 가변 길이 부호들을 고정 길이 부호의 형태로 인코딩 하는 에러 내성 엔트로피 코드(EREC : Error Resilient Entropy Code)의 성능을 향상시켜 전송 에러 발생에서 전송되는 압축 영상의 화질을 크게 개선할 수 있는 기법을 제안한다. 기존의 EREC와 제안 기법을 비교하였을 때, 동일한 비트 에러율(BER)에서 제안 기법이 객관적 화질뿐만 아니라 주관적으로도 향상된 화질의 결과 영상을 얻을 수 있었다.

  • PDF

MIMO 간섭채널에서 정보와 전력의 동시 전송 (SWIPT)을 위한 송수신기 설계 (Joint Transceiver Design for SWIPT in MIMO Interference Channel)

  • 서방원
    • 한국인터넷방송통신학회논문지
    • /
    • 제19권5호
    • /
    • pp.55-62
    • /
    • 2019
  • 본 논문에서는 K 사용자 MIMO 간섭 채널을 고려하였으며, 정보와 전력을 동시에 전송하는 SWIPT 시스템을 위한 송수신기 설계 방법에 대해서 다룬다. 그리고, 정보 수신 장치와 전력 수확 장치가 같은 수신기에 존재하는 SWIPT 시스템을 고려한다. 제안하는 방식에서는 신호대 누수 잡음비 (SLNR)를 비용 함수로 사용하고, 수확 전력에 대한 임계값을 만족하도록 송수신기를 설계한다. 즉, 수확 전력에 대한 제약 조건 하에서, SLNR을 최대화시키도록 송신단 프리코딩 벡터, 수신단 검파기 벡터, 전력 분배 상수를 동시에 설계한다. 컴퓨터 모의실험을 통하여, 제안하는 기법과 기존 기법의 신호 대 간섭 잡음비 (SINR) 성능을 비교하였다. 사용자 수, 송신 안테나 개수, 수신 안테나 개수 간의 특별한 제약 조건을 만족하는 경우, 제안하는 기법은 낮은 SNR에서 기존 기법보다 우수한 SINR 성능을 나타낸다는 것을 보였다. 또한, 특별한 제약 조건을 만족하지 못하는 경우에는, 제안 기법이 모든 SNR 범위에 대해서 기존 기법보다 더 우수한 성능을 나타낸다는 것을 보였다.

UMM(Unitary Matrix Modulation)을 이용한 LDPC(Low Density Parity Check) 코디드 OFDM 시스템 (Low Density Parity Check (LDPC) Coded OFDM System Using Unitary Matrix Modulation (UMM))

  • 김남수;강환만;조성호
    • 한국통신학회논문지
    • /
    • 제30권5A
    • /
    • pp.436-444
    • /
    • 2005
  • 다중 안테나 시스템에서 UMM (unitary matrix modulation)을 사용한 방법을 USTM (unitary space-time modulation)이라 부른다. OFDM 시스템에서 coherence bandwidth 만큼의 이격을 두고 UMM의 대각 행렬을 이용한 방법이 제안되고 있다. 또한 최근에 디코딩 방법이 간단하고 좋은 성능을 갖는 LDPC (low density parity check) 코드에 대한 연구가 진행되고 있다. 본 논문에서 UMM (unitary matrix modulation)을 사용하고 LDPC 코디드 된 OFDM 시스템을 제안한다. 또한 다중 송신 안테나를 사용하여 송신 diversity 이득을 얻는 것이 아니라, 하나의 송신 안테나를 이용하여 채널의 coherence bandwidth 만큼의 주파수 간격 (splitting)을 두어 채널에 대한 주파수 이득을 고려하여 UMM/OFDM 시스템을 설계 하였다. 이 방법을 이용하여 본 논문에서 제안된 UMM-S/OFDM에 대한 성능 특성을 다중 경로 Rayleigh 페이딩 채널 환경에서 시뮬레이션을 통하여 검증하였다.

Effect of in-Plane Magnetic Field on Rashba Spin-Orbit Interaction

  • Choi, Won Young;Kwon, Jae Hyun;Chang, Joonyeon;Han, Suk Hee;Koo, Hyun Cheol
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.394-394
    • /
    • 2013
  • The spin-orbit interaction has received great attention in the field of spintronics, because of its property and applicability. For instance, the spin-orbit interaction induces spin precession which is the key element of spin transistor proposed by Datta and Das, since frequency of precession can be controlled by electric field. The spin-orbit interaction is classified according to its origin, Dresselhaus and Rashba spin-orbit interaction. In particular, the Rashba spin-orbit interaction is induced by inversion asymmetry of quantum well structure and the slope of conduction band represents the strength of Rashba spin-orbit interaction. The strength of spin-orbit interaction is experimentally obtained from the Shubnikov de Hass (SdH) oscillation. The SdH oscillation is resistance change of channel for perpendicular magnetic field as a result of Zeeman spin splitting of Landau level, quantization of cyclotron motion by applied magnetic field. The frequency of oscillation is different for spin up and down due to the Rashba spin-orbit interaction. Consequently, the SdH oscillation shows the beat patterns. In many research studies, the spin-orbit interaction was treated as a tool for electrical manipulation of spin. On the other hands, it can be considered that the Rashba field, effective magnetic field induced by Rashba effect, may interact with external magnetic field. In order to investigate this issue, we utilized InAs quantum well layer, sandwiched by InGaAs/InAlAs as cladding layer. Then, the SdH oscillation was observed with tilted magnetic field in y-z plane. The y-component (longitudinal term) of applied magnetic field will interact with the Rashba field and the z-component (perpendicular term) will induce the Zeeman effect. As a result, the strength of spin-orbit interaction was increased (decreased), when applied magnetic field is parallel (anti-parallel) to the Rashba field. We found a possibility to control the spin precession with magnetic field.

  • PDF

곡면형 다중모드 간섭 도파로를 사용한 플라즈마 적응 결합기의 구현 (Realization of Plasmonic Adaptive Coupler using Curved Multimode Interference Waveguide)

  • 호광춘
    • 한국인터넷방송통신학회논문지
    • /
    • 제16권2호
    • /
    • pp.165-170
    • /
    • 2016
  • 곡면형 플라즈마 도파로에 기초한 나노 크기의 전력분배기가 다중모드 간섭 결합기의 특성을 이용하여 설계되었다. 플라즈마 곡면형 다중모드 간섭 결합기(PC-MMIC)의 적응 특성을 쉽게 분석하기 위하여 등각변환 해석법을 이용하여 곡면형 구조를 평면형 구조로 등가 변환하였다. 또한, 3D 전송구조의 전파특성과 최적의 설계변수를 선택하기 위하여 유효 유전체 방법과 종방향 모드 전송 선로 해석법을 적용하였다. 설계된 $2{\times}2$ PC-MMIC는 휘어진 구조에 기인하여 quasi-TM 모드에서는 PC-MMIC의 특성이 나타내지 않았으며, quasi-TE 모드의 경우 50%:50%의 비율로 출력되는 3dB 결합특성이 나타나지 않았다. 더욱이, 곡률 반경이 작은 부분 보다 큰 부분에서 입사된 신호가 더욱 좋은 결합특성을 나타내었다.

자연하천에서 오염물질의 횡확산에 관한 수치모형 (Numerical Investigation of Transverse Dispersion in Natural Channels)

  • 서일원;김대근
    • 물과 미래
    • /
    • 제28권5호
    • /
    • pp.151-162
    • /
    • 1995
  • 자연하천에서 오염물질의 횡확산과정은 정확하게 모의하기 위하여 2차원 유관확산모형을 개발하였다. 본 모형에서는 독립변수로서 횡방향거리 대신에 횡방향누가유량을 도입하였고, 하천의 주흐름을 따라 좌표축을 설정하는 자연좌표계를 사용하였다. 유도한 유관확산방정식을 풀기 위한 수치방법으로서 Eulerian-Lagrangian method를 이용하였다. 유관확산방정식을 연산자분리방법을 이용하여 이송을 지배하는 방정식과 확산을 지배하는 방정식으로 분리하였다. 그리고 이송방정식은 Eulerian 계산격자상에서 특성곡선법을 이용하였고 확산방정식은 중앙차분법을 이용하여 수치모의 하였다. 본 연구에서는 이송방정식의 풀이에서 사용되는 보간다항식으로 cubic spline 보간다항식을 이용하였다. 본 연구에서 개발한 모형을 적용하여 실제 자연하천에서 행해진 정상상태의 색소실험 결과를 모의한 결과개발된 모형이 우수한 거동을 보이고 있음이 밝혀졌다.

  • PDF

충돌 전력 분석 공격에 높은 공격 복잡도를 갖는 RSA 알고리즘에 대한 취약점 분석 및 대응기법 (Analysis and Countermeasure on RSA Algorithm Having High Attack Complexity in Collision-Based Power Analysis Attack)

  • 김수리;김태원;조성민;김희석;홍석희
    • 정보보호학회논문지
    • /
    • 제26권2호
    • /
    • pp.335-344
    • /
    • 2016
  • 부채널 분석 중 전력 분석 공격은 가장 실용적이며 강력한 기법으로 알려져 있다. 전력 분석 공격 중 단일 파형공격은 단 하나의 파형을 이용하여 공개키 암호 시스템의 비밀정보를 복원하는 강력한 분석기법으로 최근에 활발히 연구되고 있다. 가장 최근에 Sim 등은 이러한 공격에 높은 안전성을 갖는 새로운 지수승 알고리즘을 소개하였다. 본 논문에서 Sim 등이 제안한 단일 파형 공격에 높은 공격 복잡도를 갖는 알고리즘의 취약점을 분석한다. 메시지 블라인딩과 지수 분할 기법에 윈도우 기법을 적용해 높은 공격 복잡도를 갖는 알고리즘을 제안하였지만 사전 연산과정에서 발생하는 정보를 이용하여 비밀정보를 복원할 수 있음을 확인하였다. 또한 취약점을 보완하여 단일파형 공격에 높은 공격 복잡도를 갖는 지수승 알고리즘을 새롭게 제안하였다. 설계된 알고리즘은 사전 연산 과정에서 실제지수 연산에 사용되는 값들의 재사용을 최소화 하여 충돌 공격에 대해 높은 안전성를 보장한다.