• The Journal of the Acoustical Society of Korea
• /
• v.15 no.2
• /
• pp.55-60
• /
• 1996

This paper describes the subjective assessment of the multi-channel audio quality according to the bitrate changing and evaluates the predistortion effect to avoid the unmasked noise after matrixing/dematrxing process in transmission and regeneration of the multi-channel audio. The simulation is processed by the perceptual coding that is MPEG-2 Audio layer II algorithm. We evaluate the quality improvement about predistortion using or not by 384, 320, 256, 128kbps. As the result of the double blind subjective assessment, 5 Grade-Impairment Scale is scored under minus one to 320kbps and so audio quality is evaluated to be perceptible, but not annoying in 3/2 channel. The effect of the predistortion is improved one level in 128kbps and especially speech test material I better improved than music test materials.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.4
• /
• pp.421-428
• /
• 2008

Youngwon channel located in Chinhae city and formed by the Busan New Port Construction Project has been concerned about the water quality degradation problems because of the flow and pollutants stagnation due to its long-narrow shape. In this study, the water quality(hereafter WQ) variation is analysed by using the monthly WQ data measured in Yongwon channel from 2003 to 2007. The analysis shows that the TN and TP concentration in the inside Yongwon channel is definitely worse than the TN and TP concentration in the entrance of the Yongwon channel based on the 95% confidence level. The COD, TN, and TP concentrations in the Yongwon channel are 1.34, 2.08, and 1.80 times larger than that in the entrance of the Yongwon channel, respectively. It has been found that only the TP concentration in SW-26 station has an increasing trend based on the Mann-Kendall test with respect to 95% confidence level. The other stations and the other WQ constituent changes do not have the any significant trends.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.40-47
• /
• 2012

In dual-hop relaying systems, the conventional partial relay selection is based on the channel information only for the first hop. On the other hand, the efficient partial relay selection is based on the channel information for the hop with the minimum of the average channel powers for the first and second hops at each end-to-end link since the correlation coefficient between the end-to-end link quality and the link quality of the hop with the minimum of the average channel powers for the first and second hops is larger than that between the end-to-end link quality and the link quality of the other hop. In this paper, the outage probability of the conventional partial relay selection and the efficient partial relay selection in dual-hop decode-and-forward relaying systems is analyzed for non-identically distributed Rayleigh fading channels. Through numerical investigation, the outage performance of the efficient partial relay selection is compared with the outage performances of the conventional partial relay selection and the best relay selection based on all the channel information for the first and second hops.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.5
• /
• pp.567-573
• /
• 2008

Water quality in the longitudinal and cross section was measured and analyzed at Dal stream. The change of water quality was compared with the change of discharge at the important points. When discharge was increased by rainfall, the concentration of BOD was decreased and the concentrations of TN and TP were increased. The correlation coefficient of BOD, TN, TP showed large with the water velocity and depth in the Case 2 that discharge was increased. Rainfall had much influenced in water quality because of moving the nonpoint source to the channel. Water velocity was analyzed by numerical model(Surface water Modeling System). Velocity was comparatively fast in the upstream that had a steep slope and narrow channel. The characteristics of pollution transfer was simulated in 2-dimensional channel, the pollution diffused rapidly to the center of flow in the main channel. Flow had much influenced in diffusion of pollution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3B
• /
• pp.264-273
• /
• 2009

For IEEE 802.15.3 HR-WPAN, we propose the DABL algorithm that PNC can allocate the channel times to the DEV in super frame in order that system frame throughput is increased and the delay is decreased. In detail, the DABL algorithm allows to dynamically allocate channel time as well as to adaptively apply the modulation and coding scheme based on the link quality of the DEV. In addition, due to the facts that QoS is quite different depending on service types, we provide the DABL algorithm taking into account RT(Real Time) traffic and Non-RT traffic respectively. Finally, we show simulation results of the DABL algorithm compared to the conventional algorithm that the PNC equally allocates channel times to the DEV regardless of the link quality of the DEV.

• Journal of Communications and Networks
• /
• v.16 no.2
• /
• pp.217-226
• /
• 2014

In this research, we study the problem of opportunistic spectrum access (OSA) in a time-varying environment with fading channels, where the channel state is characterized by both channel quality and the occupancy of primary users (PUs). First, a finite-state Markov channel model is introduced to represent a fading channel. Second, by probing channel quality and exploring the activities of PUs jointly, a two-dimensional partially observable Markov decision process framework is proposed for OSA. In addition, a greedy strategy is designed, where a secondary user selects a channel that has the best-expected data transmission rate to maximize the instantaneous reward in the current slot. Compared with the optimal strategy that considers future reward, the greedy strategy brings low complexity and relatively ideal performance. Meanwhile, the spectrum sensing error that causes the collision between a PU and a secondary user (SU) is also discussed. Furthermore, we analyze the multiuser situation in which the proposed single-user strategy is adopted by every SU compared with the previous one. By observing the simulation results, the proposed strategy attains a larger throughput than the previous works under various parameter configurations.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.7
• /
• pp.434-441
• /
• 2003

This paper proposes a new quantitative and objective image quality metric which is essential to verify the performance of block-based DCT image coding. The proposed metric considers not only global distortion of coded image such as spatial frequency sensitivity and channel masking using HVS based multi-channel model, but also structural distortions caused block-based coding. The experimental results show a strong correlation between proposed metric and subjective metric.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.7
• /
• pp.434-434
• /
• 2003

This paper proposes a new quantitative and objective image quality metric which is essential to verify the performance of block-based DCT image coding The proposed metric considers not only global distortion of coded image such as spatial frequency sensitivity and channel masking using HVS based multi-channel model, but also structural distortions caused block-based coding. The experimental results show a strong correlation between propose(B metric and subjective metric.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.2
• /
• pp.241-250
• /
• 2000

In this study, condensation heat transfer tests were conducted in flat aluminum multi-channel tubes using R-22. Two internal geometries were tested ; one with smooth inner surface and the other with micro-fins. Data are presented for the followin~ range of variables ; vapor quality($0.1{\sim}0.9$), mass flux($200{\sim}600kg/m^2s$) and heat flux($5{\sim}15kW/m^2$). The micro-fin tube showed higher heat transfer coefficients compared with those of the smooth tube. The difference increased as the vapor quality increased. Surface tension force acting on the micro-fin surface at the high vapor quality is believed to be responsible. Different from the trends of the smooth tube, where the heat transfer coefficient increased as the mass flux increased, the heat transfer coefficient of the micro-fin tube was independent of the mass flux at high vapor quality, which implies that the surface tension effect on the fin overwhelms the vapor shear effect at the high vapor quality. Present data(except those at low mass flux and high quality) were well correlated by equivalent Reynolds number, Existing correlations overpredicted the present data at high mass flux.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.9
• /
• pp.729-734
• /
• 2000

Recently, Very Large Scale Integrated (VLSI) circuit & deep-submicron bulk Complementary Metal Oxide Semiconductor(CMOS) devices require gate electrode materials such as metal-silicide, Titanium-silicide for gate oxides. Many previous authors have researched the improvement sub-micron gate oxide quality. However, few have reported on the electrical quality and reliability on the ultra thin gate oxide. In this paper, at first, I recommand a novel shallow trench isolation structure to suppress the corner metal-oxide semiconductor field-effect transistor(MOSFET) inherent to shallow trench isolation for sub 0.1${\mu}{\textrm}{m}$ gate oxide. Different from using normal LOCOS technology deep-submicron CMOS devices using novel Shallow Trench Isolation(STI) technology have a unique"inverse narrow-channel effects"-when the channel width of the devices is scaled down, their threshold voltage is shrunk instead of increased as for the contribution of the channel edge current to the total channel current as the channel width is reduced. Secondly, Titanium silicide process clarified that fluorine contamination caused by the gate sidewall etching inhibits the silicidation reaction and accelerates agglomeration. To overcome these problems, a novel Two-step Deposited silicide(TDS) process has been developed. The key point of this process is the deposition and subsequent removal of titanium before silicidation. Based on the research, It is found that novel STI structure by the SEM, in addition to thermally stable silicide process was achieved. We also obtained the decrease threshold voltage value of the channel edge. resulting in the better improvement of the narrow channel effect. low sheet resistance and stress, and high threshold voltage. Besides, sheet resistance and stress value, rms(root mean square) by AFM were observed. On the electrical characteristics, low leakage current and trap density at the Si/SiO$_2$were confirmed by the high threshold voltage sub 0.1${\mu}{\textrm}{m}$ gate oxide.