• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7C
• /
• pp.726-732
• /
• 2003

The paper proposes a motion estimation (ME) technique to reduce computational complexity. It is achieved by skipping ME process for macro-blocks decided to be in no need of the operation. Thus, it is called ME skipping technique(MEST). In general, the ME is composed of integer pixel precision ME (IME) followed by half pixel precision ME (HME). The MEST is performed just before an IME process and makes a decision on skipping the IME process according to a criterion based on ME errors of adjacent macro-blocks (MBs) already encoded. When the IME process for a MB is decided to be skipped, which is called ME skip mode, the IME process is skipped and the integer pixel precision motion vector of the MB is just replaced by a predicted vector and used as the input of HME. On the other hands, the IME processes for MBs in ME non-skip mode are not skipped but normally performed. Accordingly, the MEST is very effective to reduce computational complexity when MBs in ME skip mode is abundant. In addition, when the MEST is applied to video encoder, it contributes to more accurate rate control and more robusaess for channel errors. It is experimentally shown that the MEST has the above advantages while maintaining good reconstructed image quality.

• Korean journal of communication and information
• /
• v.47
• /
• pp.120-147
• /
• 2009

The purpose of this paper is to promote bilateral friendly relations, the elements that hinder Hate Korea wave's(Kenkanryu) status and an analyzation of the characteristics of its causes and solutions for it. The Hate Korea wave is to be discussed in the fountain Hate Korea wave 2ch(2channel, ni channeru) acquaintances of information and representation to analyze the causes of this Japanese anti-Korean thinking. All of society should be aware of the differences and see what we have in common. I researched discussions of 2ch information and the content of other similar media. The expression was very violent. However, there was both general awareness of a gap between criticism and support. The gap was about what is not unusual on the Internet and not to be greatly concerned about. I also compares anti-Korean's awareness to Korea with general Japanese's, and finds that there are gap between them. For example by analyzing general Japanese's awareness we can find 18% of people who criticize the Hate Korea wave or have positive image of Korea. futhermore the proportion of anti-Korean contents in internet is not very high, so we don't have to worrying about the phenomenon seriously. but because of the following three points, there are sufficient needs to concern about the phenomenon constantly. First, sources of Hate Korea wave are traditional media. Second, the consumers of Hate Korea wave are mainly young generation who will make future relation of two countries. And last, Hate Korea wave include potential power to explode when certain conditions are met.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.95-102
• /
• 2005

When images compressed with block-based compression techniques are transmitted over a noisy channel, unexpected block losses occur. In this paper, we present a post-processing-based block recovery scheme using Haar wavelet features. No consideration of the edge-direction, when recover the lost blocks, can cause block-blurring effects. The proposed directional recovery method in this paper is effective for the strong edge because exploit the varying neighboring blocks adaptively according to the edges and the directional information in the image. First, the adaptive selection of neighbor blocks is performed based on the energy of wavelet subbands (EWS) and difference of DC values (DDC). The lost blocks are recovered by the linear interpolation in the spatial domain using selected blocks. The method using only EWS performs well for horizontal and vertical edges, but not as well for diagonal edges. Conversely, only using DDC performs well diagonal edges with the exception of line- or roof-type edge profiles. Therefore, we combined EWS and DDC for better results. The proposed methods out performed the previous methods using fixed blocks.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.30-38
• /
• 2017

In this paper, we propose an underwater acoustic sensor fault detection method for passive sonar systems. In general, a passive sonar system displays processed results of array signals obtained from tens of the acoustic sensors as a two-dimensional image such as displays for broadband or narrowband analysis. Since detection result display in the operation software is to display the accumulated result through the array signal processing, it is difficult to determine the possibility where signal may be contaminated by the fault or failure of a single channel sensor. In this paper, accordingly, we propose a detection method based on the analysis of RMSCR (Root Mean Square Crossing-Rate), and the processing techniques for the faulty sensors are analyzed. In order to evaluate the performance of the proposed method, the precision of detecting fault sensors is measured by using signals acquired from real array being operated in several coastal areas. Besides, we compare performance of fault processing techniques. From the experiments, it is shown that the proposed method works well in underwater environments with high average RMS, and mute (set to zero) shows the best performance with regard to fault processing techniques.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.2
• /
• pp.86-96
• /
• 1997

In order to investigate the formation of a shallow water front and its relation to water quality distributions, oceanographic measurements were made, and the numerical computations of the Simpson-Hunter stratification parameter log(H/U$^3$) were performed. It is shown from satellite image and hydrographic data that the shallow water front is formed near the northern Kaduk channel, and the stratification parameter log(H/U$^3$) near the front is in a range of 2.0-2.5. Measured COD (Chemical Oxygen Demand) concentrations in offshore region of the front and in the western part of the bay are below 2.0 mg/1. whereas the concentrations in Masan Bay located in the northern inside of the frontal zone are high as 3.0-5.5 mg/1. COD concentrations decrease gradually from Masan Bay toward the offshore due to the dilution by strong water mixing. Anoxic and hypoxic water masses at the bottom layer in summcr occur in the western part of Chinhae Bay and in Masan Bay, and DO (Dissolved Oxygen) concentrations become low with increasing the stratification parameter. DO concentrations outside the front are more than about 4.0 mg/1, whereas the concentrations inside the front are low. The shallow water front plays a significant role for material transport from coastal area to oceanic area, and the frontal region seems to be important physical and chemical boundaries.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.227-233
• /
• 2011

Attention has been focused on geothermal energy as an alternative energy because it is continuously operable without external supply. Most of geothermal anomalies in Korea are related to deep circulation of groundwater through a fracture system in granite area. Therefore it is very important to understand the distribution of the fracture system which is the main channel of ground water. In this research, we constructed the velocity models with a fracture system and the layered sediments, respectively, and generated synthetic data sets with them to verify the presented vertical seismic profiling (VSP) preprocessing scheme. We compared the results from conventional VSP preprocessing flow to those from VSP preprocessing flow considering fracture system. We noticed that the preprocessing flow considering fracture system retains more sufficient signal including down-going wave than conventional preprocessing. In addition, we applied 3D VSP prestack phase screen migration to the preprocessed reversed VSP (RVSP) data from Seokmo Island so that we were able to image fracture structure of the geothermal site in Seokmo Island.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.114-122
• /
• 2015

In the high convective gas flow condition, irregular shaped water waves from which droplet entrainment occurs are generated under horizontally stratified two-phase flow condition. KAERI proposed a new mechanistic droplet entrainment model based on the momentum balance equation consisting of the shear stress, surface tension, and gravity forces. However, this model requires correlation or experimental data of several physical parameters related to the wave characteristics. In the present study, we tried to measure the physical parameters such as wave slope, wave hypotenuse length, wave velocity, wave frequency, and wavelength experimentally. For this, an experiment was conducted in the horizontal rectangular channel of which width, height, and length are, respectively, 40 mm, 50 mm, and 4.2 m. In the present test, the working fluids are chosen as air and water. The PIV technique was applied not only to obtain images for phase interface waves but also to measure the velocity field of the water flow. Additionally, we developed the parallel wire conductance probe for the confirmation of wave height from PIV image. Finally, we measured the physical parameters to be used in the validation of new droplet entrainment model.

• Archives of design research
• /
• v.17 no.1
• /
• pp.153-162
• /
• 2004

This paper focused on the effect of Kansei design on the web in branding as well as its influence factors. As a key of this research, it classified web users' Kansei into five categories; 1) functional Kansei, 2) sensoryKansei, 3) psychological Kansei, 4) relational Kansei and 5) cultural Kansei, and organized relevant factors. Online surveys were conducted on seven websites of the fast food brands in Korea (Lotteria, Mcdonald, BurgerKing, Popeyes, KFC, Pizza Hut, Domino's) which are targeting 463 male and females in 20s. As a result, an average of 58% responded that they had a positive Kansei experience and could enhanceits brand preference. Of the sensory Kansei, visual design factors were the one that gave the greatest effect on brand preference enhancement. Regarding the functional Kansei satisfaction, such as user convenience and access speed were also one of the most crucial variables for the whole Kansei satisfaction. Moreover, the preference enhancement brought not only a positive effect on its reliability but also its brand image and consumers' purchasing desire. Based on the survey results, the additional FGI (Focus Group Interview) had been conducted and determined \circled1 what kind of major Kansei that users wanted to have satisfied, \circled2 what type of design can give strong Kansei appeal to its users, and \circled3what design factors gave an effect on sensory emotion. In the course of this research, Itried to renew the awareness of the web importance as a major channel in non-mass interactive marketing, and suggest the effect and its possibility of emotional branding through Kansei design in the web as well as design principles of strategic Kansei design.

• Journal of Biomedical Engineering Research
• /
• v.29 no.1
• /
• pp.32-39
• /
• 2008

This paper reports on a realtime OS based master-slave configuration robot control system for laparoscopic surgery robot which enables telesurgery and overcomes shortcomings with conventional laparoscopic surgery. Surgery robot system requires control system that can process large volume information such as medical image data and video signal from endoscope in real-time manner, as well as precisely control the robot with high reliability. To meet the complex requirements, the use of high-level real-time OS (Operating System) in surgery robot controller is a must, which is as common as in many of modem robot controllers that adopt real-time OS as a base system software on which specific functional modules are implemened for more reliable and stable system. The control system consists of joint controllers, host controllers, and user interface units. The robot features a compact slave robot with 5 DOF (Degree-Of-Freedom) expanding the workspace of each tool and increasing the number of tools operating simultaneously. Each master, slave and Gill (Graphical User Interface) host runs a dedicated RTOS (Real-time OS), RTLinux-Pro (FSMLabs Inc., U.S.A.) on which functional modules such as motion control, communication, video signal integration and etc, are implemented, and all the hosts are in a gigabit Ethernet network for inter-host communication. Each master and slave controller set has a dedicated CAN (Controller Area Network) channel for control and monitoring signal communication with the joint controllers. Total 4 pairs of the master/slave manipulators as current are controlled by one host controller. The system showed satisfactory performance in both position control precision and master-slave motion synchronization in both bench test and animal experiment, and is now under further development for better safety and control fidelity for clinically applicable prototype.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.534-542
• /
• 1999

A sell-designed rate control strategy can improve overall picture quality for video transmission over a constant bit rate channel and the rate control method is not a normative part of MPEG-video standard, the performance of MPEG video codec can be quite different depends on how to implement the rate control scheme. The rate control scheme proposed in MPEG show good results when scene changes is not occurred. But it has weakness that it does not properly handle scene-changed pictures. Therefore picture quality after scene change is deteriorated, and possibility of overflow occurrence becomes high. In this paper, a new method for detection of scene change occurrence using local variance and a new determination scheme for adaptive quantization parameter, mqunt, which can consider local characteristic of an image by using previously computed the local variance from the scene change detection part are proposed. IN addition, and adaptive rate control scheme which can handles scene changed picture very efficiently by scene-changed picture is proposed. Computer simulations are performed to verify the performance of the proposed algorithm. The suggested detection algorithm precisely detected scene change. And the proposed rate control scheme shows better rate control performance as compared with that of the conventional MPEG scheme.