• 한국컴퓨터정보학회논문지
• /
• 제25권5호
• /
• pp.65-72
• /
• 2020

본 논문에서는, 지난 연구에서 제안한 D2D 전력제어 알고리즘의 성능 개선을 위하여, 채널추정 에러를 보상하는 세 가지 수정 D2D 전력제어 알고리즘을 제안한다. 또한, 제안하는 세 가지 수정 D2D 전력제어 알고리즘을 채널추정 에러 환경에서 성능평가를 진행한다. 실제 채널환경에서는 채널추정 에러가 빈번하게 발생한다. 지난 연구에서는 채널추정 에러가 없는 환경을 가정하고 제안된 D2D 전력제어 알고리즘이 채널추정 에러 환경에서 성능 문제가 있음을 확인하었다. 세 가지 수정 D2D 전력제어 알고리즘은 1)재전송, 2)신호대 간섭비 여유, 3)재전송과 신호대 간섭비 병합을 기반으로 한다. 실험 결과 재전송과 신호대 간섭비 병합기법이 채널추정 에러를 보상하는 데 소모하는 전송전력과 지연 관점에서 가장 좋은 성능을 보임을 확인하였다.

• Journal of information and communication convergence engineering
• /
• 제18권2호
• /
• pp.88-93
• /
• 2020

The IEEE 802.11p-based wireless access in vehicular environments (WAVE) [1] communication is a method used exclusively for wireless communication on the road. This technique enables information sharing not only among moving vehicles but also between vehicles and infrastructure [2]. As part of WAVE communication, data is transmitted to and from vehicles in motion; in this case, it is difficult to determine the channel accurately in an outdoor environment owing to the Doppler shift [3]. This paper proposes a new channel estimation scheme for enhancing the reception performance of the IEEE 802.11p-based WAVE system. The proposed technique obtains the initial channel value by estimating the least square in the time domain by inserting a pilot signal for channel estimation into the IEEE 802.11p virtual subcarrier. Subsequently, a least mean square algorithm is applied to the initial channel value to update the estimated channel value. The simulation results obtained using the proposed channel estimation technique confirm its remarkable efficiency.

• 한국유통학회지:유통연구
• /
• 제1권1호
• /
• pp.65-81
• /
• 1996

Despite the impressive economic growth over the past several decades, Korea's distribution sector has remained quite underdeveloped. Until recently, management of the marketing channels also has been staying at an unsophisticated level. The Korean marketing channel system is largely characterized by 1) undifferentiated channel types among the competing manufacturers, 2) dominance by the manufacturers over the other channel members, 3) high level of conflicts among the channel members, 4) inefficient marketing information system, and 5) lack of managers properly trained in channel operation and management. Currently, major change factors emerged and has begun to directly affect the Korean marketing channel system. The most salient changes surrounding the Korean marketing channel system are 1) complete opening of the marketing channels for the foreigners, 2) emergence and spread of new types of channels 3) adoption of advanced information technology by the various channel members, 4) increase in flexibility in production and supply systems, 5) shift of power toward the retailers away from the manufacturers, 6) growing trend for cooperation and alliance among the traditional marketing institutions. To these changes the manufacturers have been reacting, rather than proacting, mostly using defensive measures. The proactive measures that are recommended on behalf of the manufacturers include 1) installation of the strategic channel management system, 2) development of the skills for efficient interorganization management, 3) investing in efficient system for marketing information and logistics management, 4) more efficient management of brands, and 5) maintenance of price-competitiveness.

• Structural Engineering and Mechanics
• /
• 제56권2호
• /
• pp.241-256
• /
• 2015

Channel girder bridges that consist of a deck slab and two side beams are good choices for railway bridges and urban rail transit bridges when the vertical clearance beneath the bridge is restricted. In this study, the behavior of simply supported channel girder bridges was theoretical studied based on the theory of elasticity. The accuracy of the theoretical solutions was verified by the finite element analysis. The global bending of the channel girder and the local bending of the deck slab are two contributors to the deformations and stresses of the channel girder. Because of the shear lag effect, the maximum deflection due to the global bending could be amplified by 1.0 to 1.2 times, and the effective width of the deck slab for determining the global bending stresses can be as small as 0.7 of the actual width depending on the width-to-span ratio of the channel girder. The maximum deflection and transversal stress due to the local bending are obtained at the girder ends. For the channel girders with open section side beams, the side beam twist has a negligible effect on the deflections and stresses of the channel girder. Simplified equations were also developed for calculating the maximum deformations and stresses.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.33-33
• /
• 2009

Silicon nano-structures have great potential in bionic sensor applications. Atomic force microscopy (AFM) anodic oxidation have many advantages for the nanostructure fabrication, such as simple process in atmosphere at room temperature, compatibility with conventional Si process. In this work, we fabricated simple FET structures with channel width W~ 10nm (nanowire) and $1{\mu}m$ (nano-ribbon) on ~10, 20 and 100nm-thinned silicon-on-insulator (SOI) wafers in order to investigate the surface effect on the transport characteristics of nano-channel. For further quantitative analysis, we carried out the 2D numerical simulations to investigate the effect of channel surface states on the carrier distribution behavior inside the channel. The simulated 2D cross-sectional structures of fabricated devices had channel heights of H ~ 10, 20, and 100nm, widths of L ~ $1{\mu}m$ and 10nm respectively, where we simultaneously varied the channel surface charge density from $1{\times}10^{-9}$ to $1{\times}10^{-7}C/cm2$. It has been shown that the side-wall charge of nanowire channel mainly affect the I-V characteristics and this was confirmed by the 2D numerical simulations.

• International Journal of Computer Science & Network Security
• /
• 제23권9호
• /
• pp.8-16
• /
• 2023

In Japan, high-speed ground transportation service using linear motors at speeds of 500 km/h is scheduled to begin in 2027. To accommodate 5G services in trains, a subcarrier spacing frequency of 30 kHz will be used instead of the typical 15 kHz subcarrier spacing to mitigate Doppler effects in such high-speed transport. Furthermore, to increase the cell size of the 5G mobile system, multiple base station antennas will transmit identical downlink (DL) signals to form an expanded cell size along the train rails. In this situation, the forward and backward antenna signals are Doppler-shifted in opposite directions, respectively, so the receiver in the train may suffer from estimating the exact Channel Transfer Function (CTF) for demodulation. In a previously published paper, we proposed a channel estimator based on Delay and Doppler Profiler (DDP) in a 5G SISO (Single Input Single Output) environment and successfully implemented it in a signal processing simulation system. In this paper, we extend it to 2×2 MIMO (Multiple Input Multiple Output) with spatial multiplexing environment and confirm that the delay and DDP based channel estimator is also effective in 2×2 MIMO environment. Its simulation performance is compared with that of a conventional time-domain linear interpolation estimator. The simulation results show that in a 2×2 MIMO environment, the conventional channel estimator can barely achieve QPSK modulation at speeds below 100 km/h and has poor CNR performance versus SISO. The performance degradation of CNR against DDP SISO is only 6dB to 7dB. And even under severe channel conditions such as 500km/h and 8-path inverse Doppler shift environment, the error rate can be reduced by combining the error with LDPC to reduce the error rate and improve the performance in 2×2 MIMO. QPSK modulation scheme in 2×2 MIMO can be used under severe channel conditions such as 500 km/h and 8-path inverse Doppler shift environment.

• 한국산업정보학회논문지
• /
• 제2권2호
• /
• pp.219-228
• /
• 1997

The Fano metric is the maximum likelihood decoding choice for convlutional code for binary symmetric channel. The Fano metric assumes that it has previous knowledge of channel error probability. However, the bit errors in real channel occur in bursts and the channel error probability can not be known exactly. Thus, the Fano metric is not the maximum likelihood choice for bursty-noise channel. In this paper universal metri which dose not require the previous knowlege of the channel transition probability is used for sequential decoding. It is shown that the complexity of the universal is much less than that of the Fano metric bursty-noise channel, since it is estimated on a branch by branch basis.

• Transactions on Electrical and Electronic Materials
• /
• 제17권5호
• /
• pp.270-274
• /
• 2016

This article investigates the use of the Gaussian-channel doping profile for the control of the short-channel effects in the double-gate MOSFET whereby a two-dimensional (2D) quantum simulation was used. The simulations were completed through a self-consistent solving of the 2D Poisson equation and the Schrodinger equation within the non-equilibrium Green’s function (NEGF) formalism. The impacts of the p-type-channel Gaussian-doping profile parameters such as the peak doping concentration and the straggle parameter were studied in terms of the drain current, on-current, off-current, sub-threshold swing (SS), and drain-induced barrier lowering (DIBL). The simulation results show that the short-channel effects were improved in correspondence with incremental changes of the straggle parameter and the peak doping concentration.

• 한국통신학회논문지
• /
• 제34권12B호
• /
• pp.1498-1505
• /
• 2009

In centralized control sensor network, tree-based multi-channel communication overcomes the recurrent channel switching and makes possible to transfer data simultaneously from different sources. In our paper, we propose a greedy algorithm named as NIT (Non-Intersecting Tree) that the trees can avoid inter-tree interference. We also propose channel switching technique by which trees can avoid link failure or area blocking due to external interference locally without rerunningthe algorithm and without interrupting the whole network. At first we applied our algorithm for a random topology and then we evaluate the performance of the network using NS-2 simulator. The results show that with the increasing of channel the throughputand delivery ratio are increased significantly. We got better performance than a using a recent proposed Tree-based Multi-Channel Protocol (TMCP).

• 한국정보통신학회논문지
• /
• 제12권2호
• /
• pp.260-268
• /
• 2008

본 논문에서는 MCVoD system의 VoD Server Channel 할당 기법 변경을 통한 성능향상에 대해 논하고, 이에 따른 MCVoD system의 전체 성능을 분석하도록 한다. 또한 시뮬레이션을 통해, 동일한 VoD Server Channel 할당 기법을 사용하는 타 VoD system과 성능을 비교해봄으로써, VoD Server 및 Interchange Agent의 동시 사용에 따른, MCVoD system성능을 평가한다.