• Journal of Ecology and Environment
• /
• 제35권4호
• /
• pp.351-358
• /
• 2012

To investigate the environmental adaptation and ecophysiological characteristics of Suaeda maritima and S. asparagoides under saline conditions, plant growth and density were analyzed according to environmental changes of habitats. The total ion content of soil decreased with time, which was caused by the predominance of exchangeable $Na^+$ and $Cl^-$ in the upper layers. The population of S. maritima was more densely distributed in the region with higher ion contents of $Cl^-$, $Mg^{2+}$, $K^+$ and $Na^+$ than the population of S. asparagoides. Both species were showed a decreased population density according to increases in plant growth. Under the conditions of a salt field, S. maritima and S. asparagoides contained high inorganic ions to maintain low water potential, but low water soluble carbohydrate contents. In the case of free amino acid, S. maritima showed an especially high proline content, and contained rather large amounts of free amino acids, whereas S. asparagoides did not. Both species showed high inorganic ion contents in the leaves, which might be a mechanism of avoiding the ionic toxicity by diluting the accumulated ionic concentration with a high ratio of water content to dry weight. This result suggests that S. maritima seems to adapt to saline conditions by accumulating proline in addition to inorganic ions. S. asparagoides seems to adapt by osmoregulation processes, using inorganic ions rather than free amino acids.

• 한국조리학회지
• /
• 제8권1호
• /
• pp.95-105
• /
• 2002

This study was conducted to present the fundamental data on physicochemical properties of chicken foot collagen by the comparison with those from pork skin, which is present used in the factories as evaluate the usability of chicken foot in the industries of collagen production. Moisture content of chicken foot skin (CFS) was higher than that of pork skin (PS), and crude protein content was higher in PS. Content of other compositions was not different in both samples. At the evaluation of the soaking processing, effective time lapsed for soaking the skin in acid solution (acetic acid of 0.1 M) was about 12 hr for efficient extract ion of collagen, when tested by the changes of pH of the soaking solution and the increase of the weight of skins. L-Hydroxyproline of PS was slightly higher than that of CFS. Collagens were loaded in a SDS-PAGE and compared. Separated pattern of collagen of CFS was very similar to that of PS. Major collagen of CFS might be clarified as type I collagen.

• 한국식품과학회지
• /
• 제20권1호
• /
• pp.19-22
• /
• 1988

생 크릴근육 및 자비한 크릴근육에 이온화되어 있는 불소는 각각 총 불소함량이 70%, 49%이었으며 자비한 크릴근육의 총 불소함량이 생크릴근육에서 보다 높은 것으로 나타났다. 크릴근육의 가용성 단백질에 결합된 불소함량은 생크릴과 자비한 크릴 모두 pH4-6범위에서 높은 수준을 보였고 pH10 부근에서 가장 낮은 값을 보였다. 생 크릴근육의 가용성 단백질에 결합된 불소의 함량은 1가이온인 Na 염의 이온강도가 0.05, pH11일 때 약 8 ppm으로 감소되어 불소함량에 효과적인 조건인 것으로 조사되었다.

• 한국식품조리과학회지
• /
• 제32권4호
• /
• pp.466-475
• /
• 2016

Purpose: This study investigated the quality characteristics and antioxidant effects of Yakju added with rose, camellia, or cockscomb flower during fermentation. Methods: The quality characteristics and antioxidant effects were estimated including pH, amino acidity, total acid, ethanol content, color value, sensory test, electric donating ability, nitrite-scavenging ability, and ferrous ion chelating effect. Results: The pH values of Yakjus added with rose, camellia, or cockscomb flower were decreased after 2 days of fermentation and then increased after 4 days of fermentation, with final pH ranging from 4.15 to 4.27. Total acid content and amino acidity were increased during fermentation. The ethanol content in Yakjus fermented with rose, camellia, or cockscomb flower was rapidly increased after 2 days of fermentation, reaching the maximum content of 19.1% after 8 days of fermentation. In color evaluation, the L values of Yakjus added with rose, camellia, or cockscomb flower did not changes during fermentation, whereas values of a and b were increased. Total phenolic compound contents in Yakjus added with rose, camellia, or cockscomb flower were 0.67, 0.59, and 0.52 mg/mL, respectively. Total flavonoid contents in Yakjus added with rose, camellia, or cockscomb flower were 0.20, 0.09, and 0.26 mg/mL, respectively. In sensory test, the overall acceptability of Yakjus added with cockscomb flower was higher than that of Yakju added with rose or camellia flower. However, the difference was not statistically significant (p<0.05). Electron donating ability and nitrite-scavenging abilities were the highest in Yakjus added with rose flower, whereas ferrous ion chelating effect was the highest in Yakjus added with cockscomb flower. Conclusion: These results indicated that Yakjus added with rose, camellia, or cockscomb flower might have valuable functional properties due to their antioxidant effects.

• Archives of Pharmacal Research
• /
• 제19권3호
• /
• pp.178-182
• /
• 1996

Using superoxide dismutase (SOD)-deficient mutants of Saccharomyces cerevisiae, the oxidative stresses induced by 0.1 mM of copper ion $(Cu^{++})$ was studied. In aerobic culture condition, yeasts lacking MnSOD (mitochondrial SOD) showed more significant growth retardation than CuZnSOD (cytoplasmic SOD)-deficient yeasts. However, not so big differences in growth pattern of those mutants compared withwild type were observed under anaerobic condition. It was found that, under aerobic condition, the supplementation of 0.1 mM copper ioh:(Cu") into culture medium caused the remarkable increase of CuZnSOD but not so significant change in MnSOD. It was also observed that catalase activities appeared to be relatively high in the presence of copper ion in spite of the remarkable reduction of glutathion peroxidase in CuZnSOD-deficient yeasts, but the slight increments of catalase and glutathion peroxidase were detected in MnSOD-deficient strains. It implies that the lack of cytoplasmic SOD could be compensated mainly by catalase. However, these phenomena resulted in the significantincrease of cellular lipid peroxides content in CuZnSOD-deficient yeasts and the slight increment of lipid peroxides in MNSOD-deficient cells. In anaerobic cultivation supplementing copper ion, the cellular enzyme activities of catalase and glutathion peroxidase in SOD-deficient yeasts were slightly increased without any significant changes of lipid peroxides in cell membrane. It suggests that a little amount of free radicals generated by copper ion under anaerobic condition could be sufficiently overcome by catalase as well as glutathion peroxidase.dase.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.363-366
• /
• 2000

In this study, SrBi$_2$Ta$_2$$O_{9}$ (SBT) thin films were etched at different Cl$_2$gas mixing ratio in Cl$_2$/Ar. The maximum etch rate of SBT was 883 $\AA$/min in Cl$_2$(20%)/Ar(80%). The result indicates that physical sputtering of charged particles is dominant to chemical reaction in etching SBT thin films. To evaluate the changes of morphology and crystallinity on the near surface of etched SBT, atomic force microscopy (AFM) and x-ray diffraction (XRD) were used. The rms values of etched samples in Ar only or Cl$_2$ only plasma were higher than that of as-deposited, Cl$_2$/Ar Plasma. The SBT (105) crystalinity of the etched samples decreased in Af only or Cla only plasma, but maintain constant in ClyAr plasma. This can be illustrated by a decrease of Bi content or nonvolatile etching products (Sr-Cl and Ta-Cl), resulting in the changes of stoichiometry on the etched surface of the SBT thin films. The decrease of Bi content and nonvolatile etch products were revealed by x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS).).

• 펄프종이기술
• /
• 제45권6호
• /
• pp.17-23
• /
• 2013

The reduction of metal ion from the cotton linter for the preparation of NMMO (N-methylmorpholine N-oxide)-based dissolving pulp was investigated. The NMMO-based dissolving pulp was usually used for the manufacture of high quality fabrics, and need to have high alpha cellulose content and high brightness. NMMO, which is environmentally friendly, and reusable after recovering process, is very sensitive to the metal ions such as Cu, Fe, Mg, and Cr. Electron beam, sulfuric acid, acetic acid, and ozone treatment before bleaching were used and the concentration changes of the metal ions were compared to that of EDTA, a chelating agent. It was found that both acid treatments (sulfuric and acetic acid) were very effective and comparable to EDTA treatment at the same dosage in metal ion reduction, but electron beam and ozone treatment were not. The sulfuric acid treatment turned out to be effective in metal ion reduction, and most inexpensive.

• Journal of Periodontal and Implant Science
• /
• 제29권2호
• /
• pp.401-415
• /
• 1999

Root surfaces affected by periodontal disease undergo various forms of changes. Cementum exposure from gingival recession may result in absorption of calcium, phosphorus, and fluoride and subsequent hypermineralization and increased radiodensity. Although some reports have suggested that inorganic content with root cementum might show various changes depending upon age or extent of periodontal disease, but no consensus can be reached regarding the the distribution of various elements. The present study examines the difference in mineral content between healthy and periodontal diseased roots by analyzing three areas per tooth along the root surface in cervico-apical direction using electron probe and scanning electron microscope. Healthy tooth that was extracted for orthodontic purpose was used as control. Experimental teeth include those with periodontal pocket depth exceeding 6mm and those with gingival recession and periodontal pocket depth of 2-4mm. Levels of Ca, P, Mg and Na were measured using wavelength dispersive x-ray spectrometer at three areas per tooth. The examined areas were located apical to cemento-enamel junction in control and periodontal ligament-depleted areas in experimental teeth. The corresponding areas were also examined with scanning electron microscope(x70) The results are as follows. 1. Minerals were detected in order of Ca, P, Mg and Na. In all root surfaces, levels of Ca and P were higher in dentin than in cementum. 2. Level of Mg was twice as high in dentin than in cementum. There was no significant difference in the level of Mg and Na between normal and periodontal diseased roots or between the various locations in the same root. 3. Level of Ca and P in the surface cementum showed no difference between normal and periodontal diseased root, although the areas in dentin with high level of either ion also showed high level of corresponding ion in cementum. 4. Difference in the Ca and P content between various locations within the same root was noted, although no coherent pattern existed. These results suggest that although the mineral content of the root cementum in periodontitis-affected tooth is affected by exogenous ions from saliva and food, but there was no difference in the mineral contents between normal and periodontally diseased root.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.186-187
• /
• 2008

Electrical resistivity in hydrate-bearing sediments is sensitive to porosity, gas hydrate saturation, gas content, pore fluid composition, and temperature, so electrical measurements such as well logs and electromagnetic surveys have been used to explore gas hydrate-bearing formation. The high pressure tomography cell is designed considering the effect of electrode configuration and electrical shielding on tomography measurements and the safety. The evolution of electrical conductivity during $CO_2$ hydrate formation and dissociation reflects the combined effects of concurrent changes that include ionization of dissolved $CO_2$, temperature-dependent ionic mobility, changes in the degree of saturation, ion exclusion, surface conduction, and porosity changes. Measurements during hydrate formation and dissociation require careful analysis to properly interpret signatures, in particular when out-of plane conductivity anomalies prevail.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.29-32
• /
• 2004

This work was devoted to an investigation of etching mechanisms for $(Ba,Sr)TiO_3$ (BST) thin films in inductively coupled $CF_4/Ar$ plasma. We have found that an increase of the Ar content in $CF_4/Ar$ plasma causes non-monotonic behavior of BST etch rate, which reaches a maximum value of 40 nm/min at 80% Ar. Langmuir probe measurements show a weak sensitivity of both electron temperature and electron density to the change of $CF_5/Ar$ mixing ratio. O-D model for plasma chemistry gave monotonic changes of both volume densities and fluxes for active species responsible for the etching process. The analysis of surface kinetics confirms the possibility of non-monotonic etch rate behavior due to the concurrence of physical and chemical pathways in ion-assisted chemical reaction.