• 대한상한금궤의학회지
• /
• 제9권1호
• /
• pp.115-123
• /
• 2017

Objective : The purpose of this paper is to report the improvement of patient with Chronic Fatigue Syndrome(CFS) treated by herb medication based on Shanghanlun disease pattern identification diagnostic system. Methods : According to 'Disease Pattern Identification Diagnostic System based on Shanghanlun Provisions', the patient was diagnosed with Eumyangyeokchahunobok-byung, number 393 provision, and took Jisilchija-tang herb medication for 75days. The changing symptom of chronic fatigue syndrome was estimated by QOL-CFS(Chalder Fatigue Scale) and VAS(Visual Analogue Scale). Results : The QOL-CFS changed 21 to 8 and VAS changed 10 to 1. Conclusions : It is existing theory that Eumyangyeokchahunobok-byung is caused by 'having too much sex relation'. But the author diagnosed Eumyangyeokchahunobok-byung as 'Symptoms worsen when awaken at night, and sleep at day caused by poor sleep pattern' according to the palaeography about shanghanlun, and got a good results.

• 전기학회논문지
• /
• 제63권5호
• /
• pp.666-670
• /
• 2014

TEM Horn antenna is typically used in HPEM area. It is necessary to apply a high voltage of the antenna for radiating HPEM. Then, it is necessary to insulate essentially of applying a high voltage to the antenna. At this time, radiation pattern and gain of the TEM Antenna is changed. For this reason, it is necessary to analyze changing characteristics by using simulation. In this paper, I analyzed the radiation pattern of the antenna in accordance with the lens and insulating material. As a result, it was observed that the value of the gain is changed in accordance with the frequency. The lens is used for the antenna, the gain characteristic is improved.

• 한국가구학회지
• /
• 제18권3호
• /
• pp.195-204
• /
• 2007

The house method of today is the house form which is composed inside the space where it is unified in social change. Also the life method from left was exchanged with stand-up meal and it became simplification and also the form of So-ban changed in the life method which is controlled. If the ship construction trillion So-ban was the furniture which is used with putting first and today the So-ban with variation of form or the material changed with entirely different role. The So-ban of today was used in the pattern element which is form freely to appear, dual anger there is a possibility of knowing the fact that it is turning out with the So-ban which expresses a geometric pattern with the present-day sense. Today of the So-ban it will pattern it will rightly use Beak-je, the feature person who is the possibility this pattern showing It is soft with the sharp, soft beauty of curved line and rectilinear which is refined, omission and emphasizing which are bold today It applied in So-ban design.

• 한국의류산업학회지
• /
• 제10권6호
• /
• pp.947-954
• /
• 2008

The purpose of this research is to find out related factors to obtain the best collar pattern of the women's tailored jacket by analyzing the difference of the shapes between the drafted pattern and that of being stitched. The experimental conditions established are as follows. The position and angle of its break point, the notch and the width of the collar and lapel are kept unchanged. The collar decrease in neckline edge and the top collar larger than the under collar. The crossing point of gorge line is changed to make the collar's roll line straight. When the pattern is changed to make the outline of the lapel straight, the amount of cloth is changed too. According to the experimental conditions, The experimental clothes using muslin were made to. put on the manikin and the suitable methods of making the collar pattern were decided. In order to find out the influence of fabric materials on the jacket' shapes, Three kinds of wool fabrics were used and the results were evaluated. Summary of the research is as follows. When 0.5cm of the neckline edge is shortened, the standing part of the collar has less wrinkles, and its position looks natural and lastly, the material has slightly affected the collar's condition. It is desirable to make the top collar 0.2cm longer than the under collar. But the length should be different according to the fabric material. It it is thick cloth, the length has to be extended. To make the roll line straight, 0.4cm of the crossing point of gorge line should be corrected. The thick cloth needs more correction. To make the lapel's outline straight, it needs outwardly round 0.2cm more and materials make little difference to affect the shape.

• Fisheries and Aquatic Sciences
• /
• 제26권11호
• /
• pp.639-648
• /
• 2023

The sea surface temperature (SST) and ocean heat content in the Korea Waters are gradually increased. Especially the increasing trend of annual mean SST in the Korea Water is higher about 2.6 times than the global mean during past 55 years (1968-2022). Before 2010s, the increasing trend of SST was led by winter season in the Korea Waters. However, this pattern was clearly changed after 2010s. The increasing trend of SST during summer is higher about 3.9 times than during winter after 2010s. We examine the long-term variations of several ocean and climate factors to understand the reasons for the long-term pattern changes of SST between summer and winter in recent. Tsushima warm current was significantly strengthened in summer compare to winter during past 33 years (1986-2018). The long-term patterns of Siberian High and East Asian Winter Monsoon were definitely changed before and after early- or mid-2000s. The intensities of those two climate factors was changed to the increasing trend or weakened decreasing trend from the distinctive decreasing trend. In addition, the extreme weather condition like the heatwave days and cold spell days in the Korea significantly increased since mid- or late-2000s. From these results, we can consider that the occurrences of frequent and intensified marine heatwaves during summer and marine cold spells during winter in the Korea Waters might be related with the long-term pattern change of SST, which should be caused by the long-term change of climate factors and advection heat, in a few decade.

• 한국식품과학회지
• /
• 제6권2호
• /
• pp.79-85
• /
• 1974

근원섬유단백질의 생화학적 성질에 대하여서는 아직도 불명한 점이 많고, 특히 식품으로써의 근원섬유단백질의 저장 중의 변화에 대하여서는 규명되어야 할 점이 너무나 많다. 본 연구는 근원섬유단백질의 저장 중의 변화를 추구하기 위한 기초작업으로서 subcelular structure인 근원섬유를 재료로 하여 그 형태학적 측면과 생화학적 측면의 상관성을 비교 검토하였다. 근원섬유의 조제방법에 따라서 근원섬유의 근절(筋節)(sarcomere)의 길이는 변화하고 있었고 근절의 길이의 변화는 생화학적 성질. 즉 ATPase활성에 현저한 변화를 일으켰다. 근원섬유를 저농도의 trypsin으로 처리하면 근원섬유의 ATPase활성은 현저히 증가하나, 근원섬유의 위상차(位相差)현미경 상은 수축상태의 상을 나타내었다가 처리시간의 연장에 따라 sarcomere가 fragmentation을 나타냄을 보여주었다. 얻어진 결과로 근원섬유 중에는 ATPase활성을 저해하는 factor가 존재하며, 이 factor는 단백질의 inhibitory action은 아니고 steric effect임을 추정하였다. 또한 Z-line의 구성물질 중에 troponin의 관여가 추정되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3021-3026
• /
• 2007

In this paper, experimental data on flow pattern transition of inclination angles from 0-90 are presented. A test section is constructed 2 mm long and I.D 1inch using transparent material. The test section is supported by aluminum frame that can be placed with any arbitrary inclined angles. The air-water two-phase flow is observed at room temperature and atmospheric condition using both high speed camera and void impedance meter. The signal is sampled with sampling rate 1kHz and is analyzed under fully-developed condition. Based on experimental data, flow pattern maps are made for various inclination angles. As increasing the inclination angels from 0 to 90, the flow pattern transitions on the plane jg-jf are changed, such as stratified flow to plug flow or slug flow or plug flow to bubbly flow. The transition lines between pattern regimes are moved or sometimes disappeared due to its inclined angle.

• Tribology and Lubricants
• /
• 제18권3호
• /
• pp.211-218
• /
• 2002

The effect of characteristic of surface roughness and roughness patterns on friction was studied experimentally in boundary lubrication with reciprocating tribometer. Roughness was changed from Ra=0.2($\mu\textrm{m}$)to Ra=1.2($\mu\textrm{m}$). Three roughness pattern-transverse, oblique, longitudinal- were tested for various load and velocity. The experimental results show that the scuffing resistance of surfaces with transversal roughness pattern is higher than that of surface with longitudinal and obliq pattern. under the conditions of the roughness values of Ra=0.2, 0.5,1.0 and 1.2. surfacer roughness (Ra) was decreased with the normal load increased before scuffing occurred. oblique pattern and longitudinal pattern with Ra=0.2 and Ra=1.0 was higher scuffing load under low sliding velocity, but with Ra=0.5 was higher scuffing load under high sliding velocity.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.81-85
• /
• 2006

In this study, we have been examined nano Injection Molding process which can improve transcription of 100nm-level pattern. We changed the various parameter (temperature of injection mold, clamp force, temperature of nozzle) which can be influence for improving transcription. And we measured and analyzed shapes of 100nm-level pattern by Automic Force Microscope for proving transcription. We made the Blu-ray Disc sample for proving transcription. And we measured HF-Signal and jitter. As a result, when the temperature of mold is more than $120^{\circ}C$ and the clamp force is more than 10 ton, We reached over 95 percent of transcription compared with stamper pattern. And we reached in-spec. value for HF-Signal and Jitter. Then we reached over 95 percent of transcription compared with stamper pattern.

• 패션비즈니스
• /
• 제13권2호
• /
• pp.115-122
• /
• 2009

Marbling dyeing technique shows beautiful flowing pattern because the pattern is transferred to the medium by the pigments floating onto the viscous solution base. However, this marbling pattern does not have any reproducibility and the result of accidental pattern formation. Marbling process contains many complicated procedures such as making marbling base, mordanting the medium, and bubble removal with size limitation. Computer changed the many aspects in textile design and digital technique is used in many design production. However, it is impossible to produce marbling pattern with digital drawing. In this research, the digital textile design starting from marbling pattern was developed for digital textile printing. Marbling was done to produce the initial motifs and scanned. Several marbling media such as silk, polyester, and paper were used. Photoshop was used to process and develop textile design based on these marbling motifs. One repeat was developed and various colorways were tried. The developed textile design were printed using DTP.