• 말소리와 음성과학
• /
• 제12권4호
• /
• pp.9-17
• /
• 2020

Changes in the first language (L1) sound system as a result of acquiring a second language (L2) (i.e., phonetic drift) have received considerable attention from a variety of speakers, settings, and environments. Less attention has been given to phonetic drift in adult speakers' L2 learning as their length of residence in America (LOR) increases. This study examines the effects of LOR on voice onset time (VOT) in L1 Korean stops. Three different groups of Korean adult learners of L2 English were compared to assess how malleable their L1 representations are in terms of LOR and whether there is any relationship between L1 change and L2 acquisition. The results showed that the effect of LOR was linguistically unimportant in the production of Korean stops. However, VOT merger as evidence of sound change in Korean stops were robust in the speech production of most of the female speakers across the groups. The results suggest that L2 English may not be the primary cause of L1 sound change. For generalizability, further study is necessary to see whether other acoustic cues show a similar pattern.

• 한국기계가공학회지
• /
• 제18권2호
• /
• pp.52-57
• /
• 2019

To develop a stirring device that can automatically measure the viscosity of a fluid, the impeller type of the device must be recognized without making contact. In this study, we propose a method to discriminate the type of impellers using the changes in the magnetic field. Permanent magnets are inserted into a hollow hole of the impellers, and the change of the magnetic field is measured by a hall sensor. All experimental results are compared with the FEM analysis results. The results show that with the increase in diameter and length of the magnet inserted into the impeller, the magnitude of the magnetic flux density increases. The magnetic field is more sensitive to the change in the magnet diameter than to the change in magnet length. In order to reduce the machining costs, however, it is advantageous to change the magnet length instead of the magnet diameter.

• 한국의류산업학회지
• /
• 제22권2호
• /
• pp.222-232
• /
• 2020

This study analyzes changes in the knees, hips, and hip joint length according to the different angles of bending knees by 45°, 90°, and 135° respectively for knees, hips, and the hip joint that have high fracture rates when falling down. The research subjects were 10 elderly women in their 60s (or older) that obtain data collected through direct measurement. For analysis, the study drew a diagram of elongation and shrinkage based on changes and change rate from a straight posture (0°) and conducted a statistical analysis on differences of body surface length by zone according to movements. The more the knees were bent, the vertical surface length in front of the knees, the horizontal surface length above the knee line, the horizontal body surface length below the knee lines on the back, and the vertical surface lengths between front side lines and the side lines increased; however, the vertical surface length on the back decreased. For the hip joint, the difference in the vertical surface length was more distinctive when compared to the horizontal. Finally, the horizontal surface length increased below the hips and the vertical surface length increased in most areas except the sidelines and the front. The result of the change in body surface length according to the movements of this study can be utilized in the development of the motion-variable protector.

• The Korean Journal of Physiology
• /
• 제14권2호
• /
• pp.7-16
• /
• 1980

The effects of various inotropic interventions on the shape of the steady state length tension relation and the length-dependent activation process in cardiac muscle were studied. The influence of inotropic interventions upon the action potential was also observed. The range of varying muscle length was from the optimal length$(l_{max})$, where the active tension production is maximal, to 0.85 $l_{max}$. Changes in stimulus frequency or in external bathing Ca concentration constituted the inotropic interventions in this experiment. The papillary muscles were isolated from the rabbit right ventricles and perfused with $HCO-_3\;-buffered$ normal Tyrode solution which was aerated with $3%\;CO_2-97%\;O_2$ mixed gas and kept at $35^{\circ}C$. Resting Passive tension at $l_{max}$ was approximately 30% of the total tension and appeared from the muscle length of 0.90 $l_{max}$. The effect of stimulus frequency on the steady state level of developed tension was: As the stimulus frequency was increased from 0.1 to 0.5 Hz, there was little change in developed tension. As the frequency was increased further, to a value of about 3 Hz, tension increased steeply. Further increase of the frequency to 5 Hz had little additional effect on the developed tension. The length-tension curves for isometric peak tension became more steeper with the degree of potentiation by inotropic interventions. The relative steepness of the normalized length-tension curves where tension production was expressed as a percentage of maximal tension developed at $l_{max}$, varied inversely with the level of inotropic state and these curves were not superimposable one another. Thus at the stimulus frequency of 2 Hz or at the external Ca concentration of 8 mM, the relative decline in the developed tension for a given change in muscle length was considerably less than the decline observed at the frequency of 0.5 Hz or at the concentration of 2 mM Ca. Action potential duration was prolonged significantly as the frequency increased from 0.2 to 2 Hz, and this change in action potential duration was not observable on the changes in muscle length. There was a tendency of the hyperpolarization of membrane potential when the muscle length was shortened from $l_{max}$ to 0.95 $l_{max}$. These results support the hypothesis that there is a length-dependence of the activation process.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.283-288
• /
• 1999

This study is performed to evaluate slump , air content, compressive strength and length change ratio of non-shrinkage high strength ocncrete is achieved by 10% expansive additive contained. The length change ration of non-shrinkage high strength concrete which is in water curing, shows 0.055% expansion in 10% expansive additive contained concrete and 0.308 expansion in 20% expansion additive contained concrete when it is curing 28 days.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권2호
• /
• pp.108-120
• /
• 2004

Object : Patients with facial asymmetry accompanying mandibular prognathism have various causes and clinical features. So, it is difficult to find a satisfactory treatment method functionally and esthetically. Every traditional classification and interpretation to find etiopathogenesis and/or to establish ideal surgical modality has many limitations because it can't be applied simply to various conditions of patients with facial asymmetry accompanying mandibular prognathism. Therefore, we employ a new classification to interpret more details of the morphologic change of mandible and the spatial change of mandible and maxilla. Materials and Methods : Using panoramic X-ray films, PA cephalograms and submentovertex films of 126 patients diagnosed with facial asymmetry accompanying mandibular prognathism as resources, the following results were gathered after analyzing each characteristics through distributing the patterns according to the morphological mandibular asymmetry and mandibular and maxillary spatial asymmetry. Results : Almost frequency of morphological mandibular asymmetry was shown. In case of condyle-ramus elongation and body elongation group, it's frequency was the highest. Higher frequency of compensating vertical growth was shown on the side of over growing maxilla in case of vertical length difference between left and right condyle-ramus. On the other hand, higher frequency of no compensating vertical growth difference between left and right side was shown in case of no vertical length difference in condyle-ramus. Spatial mandibular asymmetry generally occurred when there was no morphological mandibular asymmetry. Correlation between condyle length difference and condyle-ramus length difference between left and right side was very high, but correlation between condyle length difference and body length difference, and correlation between condyle length difference and body vertical length difference was low. Conclusion : In case of patients with facial asymmetry accompanying mandibular prognathism, it is suggested that various pattern of facial asymmetry is occurred by the independent growth of each unit rather than dependent growth of other unit by major growth unit abnormality. Due to the untypical pattern and the various asymmetry occurring according to the changes of each mandibular growth unit, it is considered that an appropriate surgical method should be searched based on the accurate recognition of the each pattern for patients with facial asymmetry accompanying mandibular prognathism.

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.53-58
• /
• 2004

The preparation of responsive fibers from acrylic fibers is studied. Various responsive fibers, such as fibers which change their color on exposure to light or with change in temperature, have been developed and are used commercially However, the responsive material in these fibers are not the fiber itself but chemicals in microcapsules attached to the fibers by finishing, and few fibers exhibit responsive properties by itself. The partial hydrolysis of polyacrylonitrile fibers to obtain pH responsive fibers is presented in this paper. Partial hydrolysis was effected by control of the concentration of the sodium hydroxide used in the hydrolysis, hydrolysis temperature and time. The degree of hydrolysis was evaluated by nitrogen content of the hydrolyzed fibers and their response, change in length, to aqueous solutions of varying pH was studied by continually changing the pH. Significant changes in lengths with pH were observed and the gel transition behavior varied with the conditions of hydrolysis. The hysteresis of the length change was also studied to evaluate the possibilities of using hydrolyzed acrylic fibers as pH sensors.

• 한국습지학회지
• /
• 제24권4호
• /
• pp.288-300
• /
• 2022

산업화와 도시화가 광범위하게 진행되면서 온실가스 배출로 인하여 기후변화가 심해지고 있다. 우리나라는 기후변화로 인하여 평균기온이 상승하였으며, 연간 강수량도 증가하였다. 이러한 기후변화로 태양의 움직임에 맞춰 계절을 표현하는 절기의 의미도 무색해지고 있다. 따라서 본 연구에서는 제주권을 제외한 5개의 권역(수도권, 경상권, 충청권, 전라권, 강원권)을 대상으로 과거 관측자료 및 미래 대표농도경로(Representative Concentration Pathways, RCP) 기후변화 시나리오의 평균 온도 및 강수량 자료를 이용하여 계절 및 절기의 특성 변화를 비교·분석하였다. 계절길이를 분석한 결과, 전국적으로 여름의 길이가 길어지고 겨울의 길이가 짧아졌으며, 여름철 강수량은 대체적으로 증가하였다. 충청권의 경우, RCP 8.5 시나리오에서는 과거에 비해 여름의 길이는 46%, 강수량은 16.2% 증가하였으며, 겨울의 길이는 31.8% 감소하였다. 절기의 경우, 모든 절기에서 기온이 상승하였다. 특히, 충청권의 경우, RCP 8.5 시나리오에서는 과거에 비해 대서의 기온은 15.5%, 대한의 기온은 75.7% 증가하였다. 본 연구 결과를 통해 계절과 절기의 수문학적인 특성을 권역별로 파악할 수 있었으며, 이는 우리나라 기후변화 대응정책을 마련하는데 기초자료로 사용될 수 있다.

• 한국의류학회지
• /
• 제38권1호
• /
• pp.97-109
• /
• 2014

This study developed a functional dress shirt for adult males that reflected the body surface variation of a human body section by motion. This study conducted a 3D body scan for 8 subjects in their 40's based on the Size Korea 2010 database. Data recorded the proper posture change value and body surface change value to develop functional dress shirts for adult males. We scanned the subjects with a 3D body scanner for five primarily male wearing dress shirts and operating postures, right standing, arms raised to $90^{\circ}$ horizontal forward position, arms raised $90^{\circ}$ to the horizontal position side, lift up the arm $180^{\circ}$, and arm forward $90^{\circ}$ in a bent posture. We analyzed the 3D scan data from those motions to examine change of length using 3D software Rapidform XOS. The results indicated that the body surface sections with contraction were the front and rear shoulder area, armpit and central length as well the width of arms at more than 10%. The increased body section included the body and armpit back length; in addition, the rear arm vibration girth and under arm girth were more than 10%. In order to reflect the size variation of for each motion, the ease amount of the front and rear shoulder length and width needs to be reduced 20% because it affects the shoulder length during the right standing. The results suggest that the ease amount of the shoulder length should be minimal. The ease amount of the back size needs to be 0.5-2cm bigger and set 0.5-1.5cm longer than the dress shirt length side drooping to compensate for the side length shortage of each motion. The sleeve length needs to be 0-0.5cm shorter, and ease amount of the girth of sleeve bottom needs to be reduced 0-0.7cm due to the size variation of arms. However, the girth of the rear arms is suggested to be 0-0.6cm longer in the ease amount to the rear arm girth as the extension is more than 10% over the width and length of each motion.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1302-1308
• /
• 2010

This study the change of the safety factor before and after the reinforcement were compared by performing the parameter research based on the limit equilibrium analysis regarding the same cross section after carrying out the safety factor before the reinforcement on the virtual section in order to observe the change of the safety factor of the slop reinforced with the slope planting reinforced earth, and the variation of the safety factor according to the increase of the length of the reinforcement materials and the change of the slope height was analyzed. As the result, the reinforcement effect was insignificant at no more than 0.6 of L/H, the reinforcement length ratio when the reinforcement length was increased, as the increase of the safety factor was slow comparing with the non-reinforced slope. At 3.0m of the slope height, reinforcement on the slope is not necessary, and at 3.0m to 5.0m of the slope height, the inclination was not influencing at no less than 0.6 of L/H. At 5.0m to 9.0m of the slope height, the safety factor was mostly secured on the slope at 0.8 of L/H and the over-reinforced slope appeared at no less than 1.0 of L/H. Also, the safety factor increased as the slope height increases and the slope gets steeper till 0.8 of L/H, but the slope steepness affects more on the increase of the safety factor than the reinforcement material, as the reinforcing force by the reinforcement material became steady.