• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.3
• /
• pp.10-20
• /
• 2020

This paper presents a method to measure the similarity of assigned jobs in the gravure printing operation based on the chromaticity and color sequence, and order the jobs accordingly. The proposed dispatching rule can be used to fulfill diverse manufacturing site requirements because the parameters can be adjusted to prioritize chromaticity and color sequence. In general, dispatching rules either ignore the job-changing time or require that the time be clearly defined. However, in the gravure printing operation targeted in this study, it is difficult to apply the general dispatching rule because of the difficulties in quantifying the job-changing time. Therefore, we propose a method for generalizing assignment rules of the job planner, allocating relative similarity among assigned jobs, and determining the sequence of jobs accordingly. Chromaticity priority is determined by the arrangement of the color assignments in the printing operation; color sequence priority is determined by the addition, deletion, or change in a specific color sequence. Finally, the job similarity is determined by the dot product of the chromaticity and color sequence priorities. Implementation of the proposed dispatching rule at an actual manufacturing site showed the planner present the same job order as that obtained using the proposed rule. Therefore, this rule is expected to be useful in industrial sites where clear quantification of the job-changing time is not possible.

• Journal of Platform Technology
• /
• v.11 no.5
• /
• pp.59-71
• /
• 2023

This paper proposes a method of estimating the illumination chromaticity of a scene in which an image is taken. Storring and Bianco proposed a method of estimating illuminant chromaticity using skin color. Storring et al. used skin color distribution characteristics and black body locus, but there is a problem that the link between the locus and CIE-xy data is reduced. Bianco et al. estimated the illuminant chromaticity by comparing the skin color distribution in standard lighting with the skin color distribution in the input image. This method is difficult to measure and secure as much skin color as possible in various illumination. The proposed method can estimate the illuminant chromaticity for any input image by analyzing the relationship between the skin color information and the illuminant chromaticity. The estimation method is divided into an analysis stage and a test stage, and the data set was classified into an analysis group and a test group and used. Skin chromaticity is calculated by obtaining skin color areas from all input images of the analysis group, respectively. A mapping is obtained by analyzing the correlation between the average set of skin chromaticity and the reference illuminant chromaticity set. The calculated mapping is applied to all input images of the analysis group to estimate the illuminant chromaticity, calculate the error with the reference illuminant chromaticity, and repeat the above process until there is no change in the error to obtain a stable mapping. The obtained mapping is applied to the test group images similar to the analysis stage to estimate the illuminant chromaticity. Since there is no independent data set containing skin area and illuminant reference information, the experimental data set was made using some of the images of the Intel TAU data set. Compared to Finlayson, a similar theory-based existing method, it showed performance improvement of more than 40%, Zhang 11%, and Kim 16%.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.189-192
• /
• 2001

In this paper, we desire to design real time image processing system to change a various chromaticity in HDTV that has 1344*806 resolution and requires a high-speed 65MHz operation. In order to change the image chromaticity, it is necessary to calculate the color temperature of the image. Conventional way of calculating the temperature uses 2-D algorithm [1] that requires bulky hardware. This paper propose a one-dimensional color-temperature conversion that reduces the hardware complexity while keeping the performance of the 2-D algorithm. The proposed method is realized by using the Xilinx Virtex FPGA XCV 2000E-6BG560.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.589-596
• /
• 2011

Picture Quality Improvement Systems(PQIS) have been developed for user's needs with the development of display technology. Most PQIS change the all input data, so there were some color distortion. In order to compensate such problems, the PQIS using Skin Protection Algorithm(SPA) have been proposed. But the PQIS using SPA is performed simplex color emphasis, as a result occurred color saturation and decoloration. In this paper, we proposed the modified PQIS using SPA on CIE 1976 u'v' chromaticity coordinate. The modified method operated chromaticity extension and reduction at the same time about brightness value to prevent the saturation and decoloration. We evaluated by comparing the conventional method with the proposed method of RGB Gamut variation rate using 42 test image.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.4
• /
• pp.419-427
• /
• 2020

The purpose of this study was to investigate the qualitative changes of the citron by identifying the type of solution and addition of the solution to prevent the browning reaction of the citron in a way that inhibits the browning of the citron. The browning inhibitor solution was investigated using the individual and mixture, and the results of the degree of browning and chromaticity showed that vitamin C+NaCl+cyclodextrin (CD) had the lowest browning of 0.52. In chromaticity, the ΔE values indicate that the higher the value, the greater the change in color, and the lowest value of the vitamin C+NaCl+CD mixture was 47.0, indicating that there was minimal browning compared to other treatment. The active change of the polyphenol oxidase (PPO) in the citron increased enzyme activity as the browning progressed, and the vitamin C+NaCl+CD solution was the lowest at 68.40 μ/g among the anti-browning solution. Based on these research results, it seems that the CD mixing solution can be used as a citron browning inhibitor.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.243-243
• /
• 2017

Leaf colors of rice can be used to identify stress level due to its adaptation to environmental change. For most leaves green-related colors are sourced from chlorophyll a and b. For most leaves green-related colors are consisted of chlorophyll a and b. Chlorophyll concentration is normally measured using a spectrophotometer in laboratory. In some remote observation fields, it is impossible to collect the leaves, preserve them, and bring them to laboratory to measure their chlorophyll content. The measurement of chlorophyll content is observed through its color. Using CIE chromaticity diagram leaf color information in RGB is transformed into wavelength (in nm). Pheophytin contents were also analyzed in 95% ethanol extracts. In the process of leaf development of rice young seedling, both pigments were compared. Leaf samples from different rice seedling bed is taken, their colors and RGB values are recorded using Photoshop Image Analysis. SPAD-502 values were also measured. The chlorophyll and Pheophytin contents were fully estimated by ${\rightthreetimes}_{avg}$ on CIE chromaticity diagram.

• Journal of the Optical Society of Korea
• /
• v.17 no.3
• /
• pp.275-278
• /
• 2013

The effect of the wavelength-dependent scattering on the change of the color chromaticity in the lightguide panel of a liquid crystal display is examined. The white light emitted from the white LEDs located at the edge of the lightguide propagates in the lightguide and is scattered by the patterned dots that are placed on the bottom of the lightguide. The scattered lights that are far from the LEDs showed reddish color compared to the bluish color that is scattered from the near area from the LEDs. The color difference was between 0.01 to 0.06 depending on the resin and the thickness of the lightguide.

• Journal of Applied Reliability
• /
• v.2 no.1
• /
• pp.15-22
• /
• 2002

This paper is concerned about an Accelerated Life Test for Micro Display Device which is being used in a Projection TV, in order to find a failure mode occurred in field in a short time, to identify a major factor to affect a life, and to estimate a mean life. For this purpose, we selected a temperature as a accelerated factor to perform a test and measured degradation of display device using visual inspection and chromaticity table. In the result of Accelerated Life Test, it is confirmed that failure mode is equal to the degradation of display device by vendor and the Temperature is a major factor to affect a failure. Besides, according as the display device is turned to green as degraded, it is identified that the change of the chromaticity value is one method to measure the degree of the degradation . So, we applied the optimal condition, which consider a cost and life to lower the Temperature which is a major factor acquired by the result of ALT, to PTV design

• Journal of Marine Bioscience and Biotechnology
• /
• v.16 no.1
• /
• pp.19-25
• /
• 2024

To verify the color change in dried laver postproduction during the heating process, chromaticity elements were compared via a spectrophotometer across various heating conditions within the visible light spectrum. In general, the moisture reduction rate increased with rising temperature and time. Surface image comparisons revealed an expanded area of light reflection on the heat-treated dried laver sample due to surface roughening from shrinkage. No statistically significant differences in chromaticity values were observed in the measurements of brightness (L^*), redness (a^*), and yellowness (b^*). Reflectance spectrum measurements in the visible light region confirmed high reflectance under red wavelength conditions. In particular, a significant increase in reflectance at 700 nm compared with untreated samples was noted. The correlation between the increase in 700 nm reflectance of dried laver samples and heating conditions ranged from 0.7471 to 0.7793, suggesting its potential use as an indicator for comparing color changes in dried laver based on heating conditions.

• Journal of dental hygiene science
• /
• v.21 no.3
• /
• pp.178-184
• /
• 2021

Background: As the importance of the esthetic function of teeth increases, the use of esthetic restoration materials and whitening treatment are increasing. The purpose of this study was to investigate the color change of esthetic restoration materials upon using staining and whitening toothpaste. Methods: Light curing (LC) packable composite resin, LC flowable resin, LC glass ionomer (GI), and self-curing GI specimens were colored in coffee or curry for three hours a day for seven days. After that, regular toothpaste, whitening toothpaste containing hydrogen peroxide, and whitening toothpaste containing activated charcoal were applied for three minutes three times a day for two weeks. Luminosity (L), chromaticity a (a), and chromaticity b (b) were measured using a spectrophotometer once a week. Results: In the coffee-colored group, the change in L^2*a^2*b² (E²) with time was significant (p=0.004), there was no difference for different toothpaste types (p=0.646), and there was significant difference (p<0.001) for different esthetic restorative materials. The change of E² in the curry-colored group was significant only for different esthetic restorative materials (p<0.001). In the coffee-colored group, the L, a, and b values of the light-curing GI showed greater change than other materials after staining and one week after whitening, turning dark, red, and yellow. In the curry-colored group, L did not differ for different materials and times, and a and b showed the greatest difference in light-curing GI after staining and one and two weeks after whitening. Conclusion: The use of whitening toothpaste for two weeks was not different from the use of general toothpaste in the removal of staining or whitening. Since light-curing GI is the most vulnerable to coloration, it is recommended that coloring by food chromogen should be explained in advance, before using light-curing GI for teeth restoration.