• Title/Summary/Keyword: Change Switch

Search Result 232, Processing Time 0.023 seconds

The Comparison of Reliability for Change Single Loop Configuration in Radial Power Distribution System (수지상 배전계통을 단일루프로 구조 변경시 신뢰도 비교)

  • Lee, Hee-Tae;Kim, Jae-Chul;Kim, Ju-Yong
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.58 no.8
    • /
    • pp.1472-1478
    • /
    • 2009
  • The domestic power distribution system is operating in an open loop mode; however, it already has a loop structure. Power distribution systems must be changed for bi-directions power supply for smart networks due to a changing of paradigm in electric power industry. The simplest bi-directions distribution networks can make it closing of normally open switch. However, bi-directions power supply is very difficulty to be operated and there are many parts which it must study. This paper presented various models that are able to change a radial system for loop structures. Further, we compared the reliability index for each model by evaluating the amount of improvement reliability required in radial power distribution system. In addition, we calculated CIC(Customer Interruption Cost) for each model by comparing and analyzing.

Solar Cells Characteristics Tester

  • Jirawath, Parnklang;Amnard, Jenjirodpipat;Santi, Hanklar
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2000.10a
    • /
    • pp.511-511
    • /
    • 2000
  • The equipment is used for testing the electrical characteristics of solar cells that were connected to be a solar panel, which can be found anywhere of solar power plant. This device was built from power switch devices f3r sinking the high current of the solar panel. The processor is a controller, which controls the quantity of the current, which flow through the switching devices and collect the characteristic of the solar panel. The tester can measure the current, voltage, temperature, and light intensity, which are main factors that affect the electrical characteristics of solar cells. 12 bits resolution signal converter is used to change the measuring levels so we can change measuring levels to 4096 levels, and these data are stored in tile memory. The equipment can also calculate the maximum power of the solar system panel.

  • PDF

Performance analysis of the B-NT system using simulstor (시뮬레이터를 이용한 B-NT 시스템 성능분석)

  • 이규호;기장근;노승환;최진규;김재근
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.23 no.6
    • /
    • pp.1503-1513
    • /
    • 1998
  • This paper is related to a performance analysis of B-NT system, which is essential compositional equipment of B-ISDN access network. A simulator enabling performance analysis according to the change of network configuration topology and the change of user traffic is developed in this study. The developed B-NT, system simulator consists of graphic user interface module, simulation program automatic generator module, and B-NT system model library module. As examples of the results of performance analysis using the simulator, end-to-end user cell transmission delay time, queueing delay time in each system, and cell loss rate in the head node switch are presented. The simulator developed in this paper can be utilized in determining the network topology of B-NT system.

  • PDF

Developement of Web-Based Circuit-Constructible remote Laboratory (회로구성이 가능한 인터넷 기반의 원격 실험실 구축에 관한 연구)

  • Joung, Soung-Hun;Kim, Ho-Seong
    • Proceedings of the KIEE Conference
    • /
    • 2001.07d
    • /
    • pp.2603-2605
    • /
    • 2001
  • In this paper, we introduce the concept and construction of a web-based bidirectional remote laboratory system. In this configuration, students build and test circuits using internet at home, and the circuit components and experimental equipments at the school are interconnected following student's design. This means that it is possible to choose components, build circuits, connect experiment equipments, control the equipment. and receive measurement results at home in real-time. Labview and Java are used to control this system efficiently and to provide user-friendly environments. Computer-based function generator, DMM, and oscilloscope are used and switch module is used to change interconnections. It was found that a system adopting computer-based instruments, which include PXI/CompactPCI modules and PC plug-in board, provide better performance than that adopting stand-alone instruments connected with GPIB. It is believed that, if this system is installed, the real experiments, not the virtual experiments based on simulation, can be done at home effectively, resulting in revolutional change in engineering education.

  • PDF

Analysis of the Economic Impact of the Change in Congestion Management in the Korean Electricity Market (송전 혼잡처리방법 변경이 시장 참여자 수익에 미치는 영향 분석)

  • Joo, Sung-Kwan;Kim, Ji-Hui;Moon, Guk-Hyun
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.22 no.6
    • /
    • pp.134-140
    • /
    • 2008
  • A switch in congestion management nile in an electricity market may have positive or negative impact on the surplus of a market participant. As a number of wholesale electricity markets around the world either have already adopted or plan to implement Locational Marginal Pricing (LMP) for energy and congestion management, it is necessary to study the economic impact of a change in congestion management in the Korean electricity market. However, the impact of congestion management on consumer costs and generator surplus has not been studied for the electricity market in Korea. This paper examines how a change in congestion management affects consumer costs and generator surplus in the Korean electricity market.

Development and Structural Design of Textile Touch Sensor Easily Implemented (구현방식이 용이한 텍스타일 터치센서 개발 및 구조적 설계)

  • Kim, Ji-seon;Park, Jinhee;Kim, Jooyoung
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.45 no.1
    • /
    • pp.168-179
    • /
    • 2021
  • This study presents and develops a textile type touch sensor structural design that is easy to implement. First, the design of the touch sensor circuit finds the size of the switch with the easiest finger contact and selects a structure with a long circuit with the lowest resistance value. An experiment is performed on a change in an electrostatic capacitance value that accompanies the distance on the electrode and the magnitude of the electrode area of the structure; however, the structure having the distance on the electrode and the large electrode area shows the best resistance change. The laundry assessment was conducted three times at a time and ten times at a time with an average standard deviation less than one ohm, with little change in resistance. Consequently, there were no problems with durability and performance for laundry. Finally, in the bending evaluation, the difference in resistance can be seen between 1-2 ohms and was developed as a smart wearable in the future; in addition, there was no problem as a difference in resistance can be seen between 1 and 2 ohms.

Estimating Willingness to Switch to MVNO for Activation of Mobile Data Services (무선데이터서비스 활성화를 위한 MVNO 전환의사비용 추정)

  • Lee, Sang Woo;Ko, Chang Youl
    • Journal of Internet Computing and Services
    • /
    • v.16 no.4
    • /
    • pp.1-11
    • /
    • 2015
  • This study uses the contingent valuation method to estimate the switching cost for adopting the MVNO service. The findings are as follows.: First, Willingness To Switch(WTS) increases as users' using pattern and perceived degree of MVNO service, but satisfaction with current service provider does not play a significant role in predicting Switching Cost. This means that as amount of money users can save exceeds a certain level, users decide to willingly change their service provider to MVNO regardless of their level of satisfaction with current service provider. Second, there are differences in WTS among service subscribers in SKT, KT and LGU+. It means that there will be a difference in the tendency to switch to MVNO among subscribers of service providers. This study suggest the following mangerial perspective to effectively promote the MVNO and boost the MVNO market for activation of mobile data services.: First, MVNOs are better off applying differentiated pricing scheme at attractive rates than using a differentiation of service product and quality. Second, regulators should consider how to implement an MVNO regulatory policy when there is an asymmetric customer loyalty among MNOs. This research will be used to set the MVNO's pricing strategy and to build up a successful regulatory policies.

Sampling based Network Flooding Attack Detection/Prevention System for SDN (SDN을 위한 샘플링 기반 네트워크 플러딩 공격 탐지/방어 시스템)

  • Lee, Yungee;Kim, Seung-uk;Vu Duc, Tiep;Kim, Kyungbaek
    • Smart Media Journal
    • /
    • v.4 no.4
    • /
    • pp.24-32
    • /
    • 2015
  • Recently, SDN is actively used as datacenter networks and gradually increase its applied areas. Along with this change of networking environment, research of deploying network security systems on SDN becomes highlighted. Especially, systems for detecting network flooding attacks by monitoring every packets through ports of OpenFlow switches have been proposed. However, because of the centralized management of a SDN controller which manage multiple switches, it may be substantial overhead that the attack detection system continuously monitors all the flows. In this paper, a sampling based network flooding attack detection and prevention system is proposed to reduce the overhead of monitoring packets and to achieve reasonable functionality of attack detection and prevention. The proposed system periodically takes sample packets of network flows with the given sampling conditions, analyzes the sampled packets to detect network flooding attacks, and block the attack flows actively by managing the flow entries in OpenFlow switches. As network traffic sampler, sFlow agent is used, and snort, an opensource IDS, is used to detect network flooding attack from the sampled packets. For active prevention of the detected attacks, an OpenDaylight application is developed and applied. The proposed system is evaluated on the local testbed composed with multiple OVSes (Open Virtual Switch), and the performance and overhead of the proposed system under various sampling condition is analyzed.

An Analysis on the Change of Usage Behavior for Bundle Services in Korean Telecommunication Market (방송통신 결합상품서비스 이용행태 변화 분석 연구)

  • Yu, Jieun;Lee, Seong-Jun;Cho, Chanwoo
    • The Journal of the Korea Contents Association
    • /
    • v.20 no.11
    • /
    • pp.204-215
    • /
    • 2020
  • We analyze changes of consumption behavior for bundle services for the latest three years focusing on comparing the detailed service types and service providers to understand competition structure in the market. Our major findings and implications are as follows. First, the mobile telecommunication service is certainly deemed to be a major selection criteria for bundling service provider, therefore the leading company in the mobile telecommunication has become more significant market power. Second, IPTV has an important influence for slection of bundling service provider, lately in some cases, rather than broadband Internet. Third, the individual services affecting the selection of bundling service providers clearly showed differentiation among three operators as a mobile telecommunication service of SK Group, a broadband Internet of KT, and an IPTV of LGU+. In addition, the importance of individual services in securing subscribers has been increased as the preference factors to switch a service provider were synchronized with the decision of major bundling service provider. Finally, although it is difficult to find customers' lock-In due to the latest change of their intentions to switch a provider, we find it is continuously necessary to monitor customers' lock-in as there are more long-term customers with re-contracts. Our results provide the policy implications based on the change of competition structure and usage behavior in the bundle market which is not evaluated the competiton situation.

Genetic Analysis and its Application of Rhodosprillum rubrum PKY1 Plasmid (Rhodospirillum rubrum Plasmid pKY1의 유전정보 분석과 그의 활용에 관한 연구)

  • 김복환;김정목
    • Korean Journal of Microbiology
    • /
    • v.40 no.2
    • /
    • pp.172-177
    • /
    • 2004
  • Photosynthetic bacteria, Rhodospirillum rubrum, have been reported to change their metabolic patterns depend-ing on the light condition. The genetic approach for such a metabolic change is one of main subject in pho-tosynthetic bacteria. It has been reported that the extrachromosomal plasmid might be related to this metabolic regulation. In this study, we have determined the partial sequences of R. rubrum plasmid pKYl with HindIII fragments and the predicted pKYl ORFs and physical map. We found the 8 putative proteins related to the genetic recombination of bacterium, which is reported to the alternative gene expression. Our results suggest that the genes located in pKYl are possibly involved in the metabolic switch according to the photocondition.