• 전기학회논문지
• /
• 제65권3호
• /
• pp.397-403
• /
• 2016

Generally, an electrical distribution configuration is a radial system with one-way current in a distribution management system (DMS). All feeders in a DMS have tie-switches to make radial system. Sometimes, DMS should change a tie-switch for operation. In that case, the tie-switch has to be closed first; then a switch is opened as another tie-switch in order to prevent blackout for customers. At the moment when the tie-switch is closed, distribution system is operated in a loop state, not radial. Before the loop operation, DMS operator has to check any expected events for stable distribution system operation; and the most important event is a mis-operation of a protection relay. In addition, DMS operator should check voltage profile violation but a calculation method of section voltages had not been used. Thus, this paper proposes a calculation method of section voltages at a loop operation in a DMS. The proposed calculation algorithm is verified by Matlap Simulink.

• 한국철도학회논문집
• /
• 제19권6호
• /
• pp.717-726
• /
• 2016

고장차량의 대피, 급행열차 통과 시 완행열차의 대피, 주박 차량의 정차 등의 이유로 자기부상열차의 비상대피선은 반드시 필요하다. 자기부상열차용 비상대피선을 구현하는 방법은 크게 두 가지가 있다. 첫번째는 관절식 분기기를 이용하는 방식이고 두번째는 트레버스 분기기를 이용하여 차량을 적재한 상태에서 궤도를 이동시키는 방식이다. 현재 개발된 도시형 자기부상열차는 2량 1편성으로 구성되어 있으며 총 길이는 약 25m로 트레버스 분기기를 적용할 경우 약 30m의 길이 공간만을 필요로 하기 때문에 트레버스 분기기를 적용할 경우 공간적, 비용적 측면에서 이점이 있다. 따라서 본 논문에서는 구조적 안정성 확보 및 경량화를 위한 자기부상열차용 트레버스 분기기 최적설계를 진행하였다. 이를 위해 트레버스 분기기의 상면 콘크리트 매립부와 거더 높이를 설계변수로 선정하고 실험계획법, 크리깅 등의 최적화 기법을 적용하여 유한요소해석을 진행하였다. 최대 응력, 변형, 구조물 중량의 결과값 비교를 통해 구조적 안정성을 확보하면서 경량화할 수 있는 설계변수를 선정하고 재해석을 통해 해석 결과의 타당성을 입증하였다.

• 전기학회논문지
• /
• 제67권4호
• /
• pp.549-553
• /
• 2018

The applications of the pulse power technology are expanding and the necessity of a large current switch as a core component of pulsed power is increasing. A trigger gap switch composed of three electrodes was fabricated and the discharge characteristics were studied according to the change of the pressure, the shape of the main electrode, and the gap distance when the trigger pulse was applied. As a main result, the stable operation range was confirmed through the discharge inception voltage according to the gap distance and electric field analysis was performed in the same structure to confirm the electric field value of the discharge inception voltage.

• ETRI Journal
• /
• 제33권5호
• /
• pp.802-805
• /
• 2011

This letter presents a K-band polarization reconfigurable antenna integrated with a silicon radio frequency MEMS switch into the form of a compact package. The proposed antenna can change its state from linear polarization (LP) to circular polarization (CP) by actuating the MEMS switch, which controls the configuration of the coupling ring slot. Low-loss quartz is used for a radiating patch substrate and at the same time for a packaging lid by stacking it onto the MEMS substrate, which can increase the system integrity. The fabricated antenna shows broadband impedance matching and exhibits high axial ratios better than 15 dB in the LP and small axial ratios in the CP, with a minimum value of 0.002 dB at 20.8 GHz in the K-band.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1026-1029
• /
• 1993

Inherent speed-torque performance of Switched Reluctance Motor is similar to that of series wound DC motor. Thus, the speed of the motor is extremely regulated according to load torque. For the purpose of controlling the speed and torque of SRM it is necessary to change the applied DC link voltage or the switch-ON and switch-OFF angles which control the phase current of the motor. This paper describes speed-torque characteristics of an integral horse power Switched Reluctance Motor by adjusting the switch-ON and switch-OFF angles. Speed at rated load torque can be regulated by adjusting the switching angles and the control scheme is applied to 2kW, 3 phase, 6/4 SRM.

• Applied Science and Convergence Technology
• /
• 제23권1호
• /
• pp.34-39
• /
• 2014

The programmable switches which control the delivery of electrical signals in programmable logic devices are fabricated using memory technology. Although phase change memory (PCM) technology is one of the most promising candidates for the manufacturing of the programmable switches, the threshold switching material should be added to a PCM cell for realization of the programmable switches based on PCM technology. In this work, we report the impurity-doped $Ge_2Sb_2Te_5$ (GST) chalcogenide alloy exhibiting threshold switching property. Unlike the GST thin film, the doped GST thin film prepared by the incorporation of In and P into GST is not crystallized even at the postannealing temperature higher than $200^{\circ}C$. This specific crystallization behavior in the doped GST thin film is attributed to the stabilization of the amorphous phase of GST by In and P doping.

• 조명전기설비학회논문지
• /
• 제23권4호
• /
• pp.86-91
• /
• 2009

입력부 근방의 정전용량 변화를 감지하여 동작하는 간접접촉형 실내조명 스위치를 설계하고 제작했다. 그리고 간접접촉 스위치의 입력 전극에 설치된 커패시터의 정전용량을 변화시켜가며 간접접촉을 감지하는 입력 전극을 절연하는 물질의 두께 및 종류 변화에 따른 동작 감도를 측정한 결과를 표와 그래프로 나타냈다. 절연 물질은 유리, 아크릴, 그리고 나무(MDF)였는데, 이들의 유전율은 상당히 다르지만 스위치의 동작 감도는 유전율의 차이만큼 크지 않은 것이 확인되었다.

• Bulletin of the Korean Chemical Society
• /
• 제22권8호
• /
• pp.903-908
• /
• 2001

The gene aeg-46.5, which is expressed under anaerobic condition, has putative triple -10 regions and four transcription start sites. The mRNA transcription level and its start point change depending on the aerobic/anaerobic growth condition. RNA polymerase and its regulatory proteins must choose which of three -10 region to use. The putative triple 10 region was mutated to make only one of them function with consensus -10 region sequence (TATAAT) and the other two as non-functional region. The results show that the second and third -10 regions are used for the aerobic/anaerobic expression. The third -10 region is responsible for the high aerobic to anaerobic switch ratio. This suggests that only the last two of the putative triple -10 region have functions on aeg-46.5 gene expression switch control. The phenotype of the mutated promoter was tested in the wild type cell and narL - cell. The results indicate that the control by NarL is independent from the selection of -10 region. The expression patterns on multi-copy plasmids and on single-copy chromosome were compared. These results show that the aerobic/anaerobic switch control of aeg-46.5 is through the choice of -10 region. The mechanism of choosing different -10 region remains to be seen.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.288-293
• /
• 2000

BPM simulation was used in order to fabricate the LiNbO$_3$optical waveguide with optical source of He-Ne laser(λ=0.6328[$\mu$m]). we observed electric field E$_{x}$, E$_{y}$ in the x,y-direction are simulated at the LiNbO$_3$substrate (X1 55[$\mu$m]$\times$Z1 5000[$\mu$m]), where the depth, width and buffer layer of waveguide are 0.2[$\mu$m],4[$\mu$m] and 0.02[$\mu$m] respectively. By applying these parameters of single waveguide to simulate a X-switch, we have chosen index change of 0.002, width of 3[$\mu$m] and angle of 0.4$^{\circ}$~0.6$^{\circ}$of optical waveguide and under these conditions, optical beam propagates cross-side at 0.4$^{\circ}$. When applied switching voltage of 25[V], optical beam of X-switch turns cross-side to bar-side at intersection angle 0.4$^{\circ}$, index change of 0.002, waveguide width of 3[$\mu$m], electrode gap 2[$\mu$m]. By the above results, we can obtain design conditions of theoretical analysis of an X-switch optical waveguide.e.e.

• 한국컴퓨터정보학회논문지
• /
• 제27권3호
• /
• pp.99-104
• /
• 2022

본 논문에서는 기후변화에 능동적으로 대처하여 빨래 감을 자동으로 제어하는 베란다용 스마트 빨래 건조 시스템을 처음으로 개발하고 소개하고자 한다. 개발된 스마트 빨래 건조 시스템은 앱을 통해 빨랫감 위치 정보를 받은 후, 위치 정보에 따른 온도, 습도 등의 기상청 데이터를 통해 기후 변화를 실시간으로 감지하여 비가 오는 상황이 발생할 경우 건조대 위에 빨래 감을 자동으로 제어한다. 아두이노 습도 센서와 기상청 Open-API 를 통해 기상 정보를 취득하고 이는 라즈베리파이가 스위치 봇을 제어하는데 이용된다. 사용자 인터페이스는 Blynk를 사용하였으며, 스위치 봇은 빨랫감을 제어한다. 제안 시스템은 기상 악화를 감지하고 원격지에 있는 빨래감을 자동으로 제어하여 비 피해를 예방해줄 수 있다.