• 한국기후변화학회지
• /
• 제5권3호
• /
• pp.199-208
• /
• 2014

According to "IPCC guide line for national greenhouse gas inventories" each country should develop the 'Country-specific emission factor' and apply it to estimate greenhouse gases emissions from landfill. It could reflect properties of country and make estimation more accurate. For that accuracy, developed country-specific emission factor should be assessed and be verified consistently. Developed emission factors should be assessed in terms of Representative, Emission Property, Accuracy and Uncertainty, but there is no study about weighted assessment factors under each emission variable. This study do survey targeting public officials, professors and other experts for Analytical Hierarchy Process(AHP), mostly use to make decisions, to weight assessment factors. We investigated the weighted values per Emission factor for Representative, Emission property, Accuracy and Uncertainty on AHP survey, and Representative factor was the highest, and then in the order of Emission property (0.26), Accuracy(0.22), Uncertainty (0.15).

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1998년도 추계학술대회 논문집
• /
• pp.202-206
• /
• 1998

The conventional management which had economic requirement such as productivity, competition, customer satisfaction, and return needs the environmental management in order to meet a change of the external situation such as the environmental requirement (such as resources reduction, pollution prevention, and waste reduction). However, there have been a few studies which try to investigate internal factor and to regard external factors as negative ones. This paper proposes the external factors are significant to the performance. Several hypotheses were developed regarding the relationships. Based on the collected data from 126 firms, the hypotheses were analyed with SPSS.

• Perspectives in Nursing Science
• /
• 제9권1호
• /
• pp.24-35
• /
• 2012

Purpose: This research was performed to investigate Korean adolescents' body weight perception, appropriate weight change efforts, and factors that influencing these efforts. Methods: The data were obtained from 68,136 adolescents, aged 12~18 years from the 2007 Third Korean Youth' Risk Behavior Web-based Survey. Descriptive statistical analysis and odds ratio were calculated by logistic regression. Results: The distribution of the body mass index differed in boys and girls. The accuracy of body weight perception was shown in the order of the underweight (91.6%), overweigh t (73.3%), normal weight (55.4%), obesity (41.3%) groups. Adolescents with high perceived economic status tended to have a high prevalence of accuracy of body weight perception. The distribution of appropriate weight change efforts according to the actual body mass index showed that girls were trying to lose weight more than boys. The results of a logistic regression analysis regarding appropriate weight change efforts showed differences according to gender, perceived economic status, mother's educational level, and family affluence scale. Conclusion: Appropriate body weight perception and change management plans are needed for Korean adolescents. In addition, active weight change programs have to be established in the adolescents' living environments, such as schools.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권3호
• /
• pp.129-134
• /
• 2023

Although the use of batteries is rapidly increasing worldwide to improve carbon neutrality and energy efficiency, performance degradation due to the increase in the number of uses is inevitable as it is a finite resource that can be applied according to capacity and specifications. Deterioration and failure of batteries are recognized as important problems in various applications using batteries, including electric vehicles. In order to solve these problems, a diagnostic technology capable of accurately predicting battery life and grasping state information is required, but it is difficult in a non-linear form due to internal structure or chemical change. In this paper, the factors that generally cause battery performance change are directly applied to check whether there are external changes and impedance changes in the battery, and to analyze whether they affect battery life. Impedance change trends and result values were confirmed using a universal impedance spectroscopy method and a self-developed internal impedance measurement method. The results did not significantly affect the impedance change trend. It was confirmed that the increase in the number of times of battery use was prominent in the impedance change trend.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.132-137
• /
• 1993

In this paper, a fish drying process control system is proposed, which predicts the proper change with time in weight of the material fish and the drying conditions in advance, based on the performance of skilled worker. In order to implement a human expertise into an automated fish drying process control system, an experimental analysis is made and a model for the process is built. The proposed system divided into two procedures: The procedure before drying and the one during drying. The procedure before drying is for the prediction of necessary drying time. To estimate the necessary drying time, first, the proper change in weight for the product is obtained by using fuzzy reasoning. The condition part of the production rule consists of the factors of fish body and the expected degree of dryness. Kext, the necessary drying time is obtained by regression models. The variables employed in the models are the factors, inferred change in weight and drying conditions. The model for the procedure during drying is also proposed for more accurate estimation, which is described by a system of linear-differential equations.

• 한국재료학회지
• /
• 제30권6호
• /
• pp.301-307
• /
• 2020

In this study, factors considered to be causes of promotion of densification of sintered pellets identified during phase change are reviewed. As a result, conclusions shown below are obtained for each factor. In order for MA powder to soften, a temperature of 1,000 K or higher is required. In order to confirm the temporary increase in density throughout the sintered pellet, the temperature rise due to heat during phase change was found not to have a significant effect. While examining the thermal expansion using the compressed powder, which stopped densification at a temperature below the MA powder itself, and the phase change temperature, no shrinkage phenomenon contributing to the promotion of densification is observed. The two types of powder made of Ti-silicide through heat treatment are densified only in the high temperature region of 1,000 K or more; it can be estimated that this is the effect of fine grain superplasticity. In the densification of the amorphous powder, the dependence of sintering pressure and the rate of temperature increase are shown. It is thought that the specific densification behavior identified during the phase change of the Ti-37.5 mol.%Si composition MA powder reviewed in this study is the result of the acceleration of the powder deformation by the phase change from non-equilibrium phase to equilibrium phase.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.301-304
• /
• 2006

국제적으로 자유무역협정(FTA)에 따른 건설시장의 개방으로 인해 계약상의 권익 주장이 일반화되고 있으며 계약당사자들 간의 분쟁이 빈번히 발생하고 있다. 건설산업의 계약조건은 타 산업과는 다른 특수성을 지니므로 각 공사별로 공종, 환경, 주변 여건 등의 특성을 판단하여 별도의 계약 조건을 설정해야 한다. 국내에서도 공사규모의 증대와 복합기능의 요구에 따라 Design-Build의 발주가 확대되고 있으나 이에 적합한 계약규정이 정해져 있지 않고, 일반공사에서 사용되는 공사계약 일반조건의 일부규정에만 따르고 있어 설계변경 시 여러 가지 클레임 요인들이 발생하고 있는 실정이다. 건설시장 개방이라는 현안을 능동적이고 효과적으로 대처하기 위해서는 국제기준에 부합되는 설계변경 관련 건설 계약규정 및 제도 개선이 요구되므로, 본 연구에서는 이를 위한 객관적이며 합리적인 설계변경 클레임 발생요인의 유형분류와 분석을 통하여 정성적인 클레임요인들을 정량화시켜 D/B사업단계별 설계변경 관련 클레임의 주 요인에 대한 구체적인 분쟁 대응방안을 제시하였다.

• 보건교육건강증진학회지
• /
• 제23권1호
• /
• pp.63-75
• /
• 2006

Objective: This study was performed to identify the related factors of change affecting the stage of change, on the assumption that there are various stages of change in the exercise behavior of workers. Method: The subjects of the study consisted of 138 workers of 10 workplaces located in Daejeon City, and data collected by using questionnaires were analyzed with SPSS/WIN 11.5 program. Results: The subjects were distributed in the stage of exercise behavior change as follows: precontemplation stage(10.9%), contemplation stage(22.5%), preparation stage(41.3%), action stage(8.7%), and maintenance stage(16.7%). Of the process of change depending on the stage of exercise behavior change, the consciousness raising(F=11.50, p=.00), dramatic relief(F=2.82, p=.02) showed significant difference in the cognitive process, and the counter conditioning(F=4.56, p=.00), reinforcement management(F=4.64, p=.00), self-liberation(F=9.46, p=.00), and stimulus control(F=13.28, p=.00) showed significant difference in the behavioral process. For decision-making depending on the stage of exercise behavior change, both the pros of decision-making(F=9.23, p=.00) and the cons of decision-making(F=2.45, p=.04) showed significant difference. Self-efficacy depending on the stage of exercise behavior change showed significant difference as F=11.50, p=.00. The related factors of change affecting the stage of exercise behavior change were the pros of decision-making, the cons of decision-making, and self-efficacy including 34.1% R-square. Conclusion: In order to change the exercise behavior of workers positively, they need to be stimulated to use the cognitive and behavioral process in the process of change properly, and to be induced to make a decision positively. And also exercise programs suitable to various characteristics of each worker as well as those of workplaces to enhance self-efficacy need to be applied after being devised. Through the further longitudinal research, it is necessary to analyze the various aspects, such as groups to select, to maintain, to stop or give up the exercise, and to avoid the change, and to study how the related factors of change affect diversity like the above.

• Current Optics and Photonics
• /
• 제3권1호
• /
• pp.72-77
• /
• 2019

This study was performed to analyze the optical aberrations of the cornea induced by myopic refractive surgery. Corneal total higher-order aberrations, spherical aberration and coma for 4-mm and 6-mm pupils were measured using a wave-front analyzer. The amount of aberrations of the oblate corneal optics by the achieved correction was found to be larger than for the prolate corneal shape with complete eye, in an emmetropia control group. The change in corneal shape acts as an optical factor that degrades the quality of the retinal image; it seems to be one of the important factors related to quality of vision.

• 대한치과보철학회지
• /
• 제37권3호
• /
• pp.343-357
• /
• 1999

The color change of maxillofacial silicone has been attributed to certain environmental factors such as exposure to the UV component of natural sunlight, wetting and drying of the elastomer and surface abrasion resulting from the application and removal of cosmetics. The purpose of this study was to evaluate the color change of maxillofacial silicone (Silastic MDX4-4210) according to type of pigment (cadmium yellow, titanium white, cosmetic red), and UV absorber application method after 200, 400, and 600 hours of 350nm UV light irradiation. The results were as follows. 1. According to type of pigments, after 200 hours cosmetic red showed significantly larger color change than cadmium yellow and titanium white, and after 400 and 600 hours color change significantly decreased in the order of cosmetic red, cadmium yellow, and titanium white (p<0.05). 2. In the cadmium yellow group, after 200 hours, the non-treatment group showed significantly larger color change, but after 400 and 600 hours, color change significantly decreased in the order of non-treatment, surface application and mixed group (p<0.05). 3. In the titanium white group, there was no significant color change difference between the three groups after 200 and 400 hours, but after 600 hours, the mixed group showed significantly smalt or color change than the non-treatment and surface application groups (p<0.05). 4. In the cosmetic red group, there was significant decrease in color change in the order of non-treatment, surface application and mixed group (p<0.05). From the results above, the effect of UV light absorber differed according to the type of pigment, but mixing UV light absorber with maxillofacial silicone is thought to give superior resistance against UV light irradiation in the long run.