• The Journal of the Korean dental association
• /
• v.21 no.5 s.168
• /
• pp.395-402
• /
• 1983

The purpose of this study was to apply the etched metal ceramometal retainer using a composite resin and acid-etch procedure with minimal tooth reduction of abutments for the replacement of one missing anterior or posterior tooth. Author obtained the following conclusions. 1. conservation of tooth structure and minimal chair time and patient expense were the primary advantages of etched metal retainer. 2. This fixed partial denture permitted good esthetic results. 3. This retainer was successfully applied for the replacement of one missing anterior or posterior tooth. 4. Proper retainer etching ws an important procedure. 5. Etched castings could be applied to periodontal splinting and post orthodontic fixation.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.70-78
• /
• 1997

The objective of this research is to study on the upper and lower layer temperature, interface height and pressure in case of carpet, chair, trashcan and wardrobe fires in a residential room by performing the theoretical and experimental studies. The theoretical results of the upper and lower layer temperature, the interface height and the pressure were qualitatively well coincided with the experimental results. The uniformly distributed fire in case of carpet showed that the ignition and the initial growth period were relatively short while the fully developed period was considerably long. The concentrated fires such as the wardrobe showed that the ignitions and the initial growth periods were relatively long. The interface heights were around 1m as the steady state. However, at the time of the maximum temperature, the interface height was lowered to 0.5m from the floor. The pressure variation in the fire room ranged between 0.1mmAq and 0.4mmAq, and the temperature reached the highest while the pressure was maximum.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1993.07a
• /
• pp.3-26
• /
• 1993

I have briefly described some of the important advances in hydrosystems and to remark on the important scientific research priorities in hydrological sciences. We have concentrated on data collection systems, real-time control of hydrosystems, global climate change and decision support systems and GIS. In summary, I would like to stress the following points: - the advances in data collection systems, advanced methodologies for interfacion hydrologic, hydraulic, and optimization models through optimal control approaches; and the advances in decision support systems and GIS will allow the interfacing of all these technologies into some sophisticated and much needed tools for operating hydrosystems; - the ability to better understand the hydrologic processes and their relationships to other earth processes is important to understanding and modelling of the hydrologic cycle and its interactions with the ocean-atmosphere system; - and the solution to a better understanding of hydrologic sciences needs to be an international effort such as the GEWEX program briefly discussed above. I would like to thamk each of you for listening to my lecture and to once again thank those responsible for me being here today. Thank you.

• Restorative Dentistry and Endodontics
• /
• v.37 no.4
• /
• pp.240-244
• /
• 2012

Crown reattachment is the most conservative treatment which can be used to restore fractured tooth, presumably with sufficient strength, while maintaining original contour, incisal translucency, and reducing chair time and cost. However, in case of crown fracture with pin-point pulp exposure, we should cautiously minimize the irritation to the pulp and consider pre-treatment pulpal status, choice of pulp capping materials, choice of bonding system and treatment sequence during crown reattachment procedures. This case reports the considerations while crown reattachment with direct pulp capping using calcium hydroxide (Dycal, Dentsply Caulk).

• Journal of the Korea Furniture Society
• /
• v.17 no.3
• /
• pp.57-68
• /
• 2006

Most of all furniture had been produced from wood, because it is easy to obtain from our surroundings. As time goes by people want to decorate their house with new material furniture. Because it is outcome from development of material technology & industrialization. Furniture design trends of twenty century are not only the fruits of great talented furniture artists but also high-tech material engineers. In this study, I deal with a tubular steel, as an one of the most important material of furniture, and also tubular steel furniture manufactured by a cantilever method. This study researches what are special features of it, how can designers utilize it to furniture and how do they conquest defects of the material such as a sensation of coldness, hardness and so on. In this context, It is possible that create not only new shape of furniture but also new style of space through new technology innovation.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2789-2791
• /
• 2003

Today, many people are sitting on chair in their life. If a sitting posture is not correct, there is some trouble with the waist. And if it goes on long time, sometimes it cause the hurts of waist or the deformded spinal column. A crouched posture is an obstacle to breath and it give rise to drowsiness because the lack of oxygen. Sitting posture is a habit so people can't feel it oneself and look over some kind of risks. It analyzes a condition of muscles by measuring EMG of spinal both side of spin al-bones. It can have a right sitting posture by the analyzing that increasing of muscles tention in one or the other side of muscles when the posture inclines on one side or ahead.

• Journal of the Korea Furniture Society
• /
• v.13 no.2
• /
• pp.75-84
• /
• 2002

The chairs are one of the most important furniture in this modern society, as we know that history of furniture is made of history of the chairs. Among the chairs, the stool, which made by only sit and legs, forms the basis of the chairs. The stool plays an important part in the human body to support and also help to make an agile movement In a short period of time. The stool is the minimum unit of chair, which made of least size and simple structure; therefore it fits to study basic knowledge of furniture making. For that reason, we can see occasionally the schools of furniture design departments have chosen the stool making course in their foundation students' studio classes. However, the professional study on the stool, such as the study on the posture for designing stool, has not been developed yet. This study presents basic Information of design for stool by analyzing various stools formatively.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.574-574
• /
• 2003

I. Objectives Newly all-in-one adhesives were developed for reducing the techique sensitivity and chair time, but lots of concerns were made on bondability, longevity, and microleakage. The object of this study was to measure micro leakage and marginal quality of all-in-one adhesives using electrochemical method and SEM analysis quantitatively. II. Materials and Methods After making Class V cavities, they were bulk filled with Heliomolar(＃A1) after surface treatment with three adhesives：Adper Prompt (Group 1), One up bond F (Group 2), Xeno III(Group 3).(omitted)

• Journal of Technologic Dentistry
• /
• v.45 no.4
• /
• pp.124-130
• /
• 2023

This study aims to describe the clinical experience of single and bridge crowns fabricated using a cementless screw-retained implant prosthesis system. In the case of single crown (#37), regular link (HDL) was used, and bridge crowns (#15~#24), (#26~#27), (#17~#14) (#24~#26) were fabricated by selecting regular link and short link considering the vertical height. One abutment was hex shaped to ensure that it could be mounted while preventing insertion and prosthesis rotation. The advantages of cementless implant prosthesis include shorter chair time and periodic care, strong retention with LINK abutment, safety from inflammation, bacterial infection, and complications due to peri-implant cement, and high patient satisfaction. Dentists should double-check the position of the implant fixture and dental technicians should continuously manage the fit of the link and prosthesis with digital equipment to reduce screw loosening and fractures.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.310-312
• /
• 2004

The aim of this study was to analyze the characteristics of knee joint sound in frequency domain and classify the knee joint diseases. The spectral analysis of knee joint sounds was performed using LPC(Linear Predictive Coding) and Wigner-Ville distribution. Ten normal subjects and 5 patients with meniscal tearing were enrolled. Each subject was seated on a chair and underwent active knee flexion and extension for 60 seconds. Sampling frequency was 10kHz and electronic stethoscope and electro-goniometer were applied during the knee motion for data collection. The spectral analysis showed 3 peaks in both groups and the difference energy distribution in time-frequency domain. These results suggest that the diagnosis of knee joint pathology using the auscultation could be easier and more correct.