• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering. Inc., Troy, USA) and ANSYS (Swanson Analysis Systems. Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Viva dent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition. Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering, Inc., Troy, USA) and ANSYS (Swanson Analysis Systems, Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Vivadent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition, Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Journal of Oral Medicine and Pain
• /
• v.25 no.2
• /
• pp.173-189
• /
• 2000

The purpose of this study was to evaluate the effect of specific head positions on the mandibular rotational torque movements in maximum mouth opening, protrusion and lateral excursion. Thirty dental students without any sign or symptom of temporomandibular disorders(TMDs) were included as a control group and 90 patients with TMDs were selected and examined by routine diagnostic procedure for TMDs including radiographs and were classified into 3 subgroups : disc displacement with reduction, disc displacement without reduction, and degenerative joint disease. Mandibular rotational torque movements were observed in four head postures: upright head posture(NHP), upward head posture(UHP), downward head posture(DHP), and forward head posture(FHP). For UHP, the head was inclined 30 degrees upward: for DHP, the head was inclined 30 degrees downward: for FHP, the head was positioned 4cm forward. These positions were adjusted with the use of cervical range-of-motion instrumentation(CROM, Performance Attainment Inc., St. Paul, U.S.A.). Mandibular rotational torque movements were monitored with the Rotate program of BioPAK system (Bioresearch Inc., WI, U.S.A.). The rotational torque movements in frontal and horizontal plane during mandibular border movement were recorded with two parameters: frontal rotational torque angle and horizontal rotational torque angle. The data obtained was analyzed by the SAS/Stat program. The obtained results were as follows : 1. The control group showed significantly larger mandibular rotational angles in UHP than those in DHP and FHP during maximum mouth opening in both frontal and horizontal planes. Disc displacement with reduction group showed significantly larger mandibular rotational angles in DHP and FHP than those in NHP during lateral excursion to the affected and non-affected sides in both frontal and horizontal planes(p<0.05). 2. Disc displacement without reduction group showed significantly larger mandibular rotational angles in FHP than those in any other head postures during maximum mouth opening as well as lateral excursion to the affected and non-affected sides in both frontal and horizontal planes. Degenerative joint disease group showed significantly larger mandibular rotational angles in FHP than those in any other head postures during maximum mouth opening, protrusion and lateral excursion in both frontal and horizontal planes(p<0.05). 3. In NHP, mandibular rotational angle of the control group was significantly larger than that of any other patient subgroups. Mandibular rotational angle of disc displacement with reduction group was significantly larger than that of disc displacement without reduction group during maximum mouth opening in the frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of disc displacement with reduction group or degenerative joint disease group during maximum mouth opening in the horizontal plane(p<0.05). 4. In NHP, mandibular rotational angles of disc displacement without reduction group were significantly larger than those of the control group or disc displacement with reduction group during lateral excursion to the affected side in both frontal and horizontal planes. Mandibular rotational angle of disc displacement without reduction group was significantly smaller than that of the control group during lateral excursion to the non-affected side in frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of disc displacement with reduction group during lateral excursion to the non-affected side in the horizontal plane(p<0.05). 5. In NHP, mandibular rotational angle of the control group was significantly smaller than that of disc displacement with reduction group or disc displacement without reduction group during protrusion in the frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of the disc displacement with reduction group or degenerative joint disease group during protrusion in the horizontal plane. Mandibular rotational angle of the control group was significantly smaller than that of disc displacement without reduction group or degenerative joint disease group during protrusion in the horizontal plane(p<0.05). 6. In NHP, disc displacement without reduction group and degenerative joint disease group showed significantly larger mandibular rotational angles during lateral excursion to the affected side than during lateral excursion to the non-affected side in both frontal and horizontal planes(p<0.05). The findings indicate that changes in head posture can influence mandibular rotational torque movements. The more advanced state is a progressive stage of TMDs, the more influenced by FHP are mandibular rotational torque movements of the patients with TMDs.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.4
• /
• pp.271-281
• /
• 2006

Long term prediction of surgical result of skeletal class III has not been evaluated adequately because the stability of orthognathic surgery would be affected by not only set back amount of mandible but also many other factors like skeletal pattern, hyoid position, and airway size. The aimof this study is to discriminate the factors which affect the stability of post-treatment result of surgical outcome of sagittal split ramus osteotomy. We have collected 37 patients (male: 17, female: 20) from patients who have been treated at Orthodontic Department in Dankook University. The patients underwent 3 times Cephalometric X-ray taking at pre-, post-orthognathic surgery and after 12 months retention. The subjects were divided into 2 groups (Stable group: 21, Relapse group: 16) according to their relapse amount. We have taken following results from Students t-test and discriminant analysis. The discriminant factors which discern relapse and stable groupe among treatment change variables were BX and Ba-HY. Hyoid bone moved to posterior and inferior position due to surgery and repositioned superiorly and posteriorly during retention period. Skeletal patterns of the relapse group are smaller mandibular plane angle, anterior mandibular position, and greater distance from hyoid bone to cervical bone and mandible respectively.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.258-264
• /
• 2015

This study provides abasis for the development of high functional cycle wear with clothing comfort and fitness for highschool boy cyclists by a comparison of the somatotype of highschool boys cyclists and general highschool boys. This study directly measured 44 anthropometric targeted cyclists across Korea. "The sixth national standard physical survey" data targeted 16 to 18-year-old male adolescents; subsequently, anthropometric measurement data was provided by 766 people for research. Highschool boy cyclists used t-test to compare the differences in body type. The results in this study are follows. Highschool boys cyclists(compared to regular highschool boys) indicated a great somatotype stature and weight. The differences in the cervical height and the acromion height results of, cyclist appeared smaller. Cyclists angle of shoulder was smaller. The upper body of highschool boys cyclist was greater than the difference between chest breadth and bust breadth with along biacromion length. The waist front length of the cyclist was a short cycle ride upon the attitude of the streamlined. Highschool boy cyclists indicated that the muscles of the arm portion was more developed compared to general highschool boys. The lower body had less abdominal fat with a significantly developed thigh and calf.

• The Journal of Korean Physical Therapy
• /
• v.28 no.3
• /
• pp.183-188
• /
• 2016

Purpose: The aim of the study was to investigate neck posture, range of motion, muscle endurance and self-report of pain and disability in smartphone users. Methods: Seventy-eight university student volunteers, aged between 18 and 30 years (mean age 23.2), were assessed for: a head-neck posture by measuring cranial vertical angle, neck range of motions using cervical range of motion device, and a deep neck flexor endurance using a stabilizer. Finally, subjects were asked about their neck pain and completed disability questionnaires, ie, Short Form McGill Pain Questionnaire, Neck Disability Index, and World Health Organization Disability Assessment Schedule 2.0. Results: Thirty-eight subjects experienced recurrent neck pain with/without upper limb pain (neck pain group) and 40 reported no current neck pain with/without upper limb pain (no neck pain group). Differences were found between groups on pain and disability questionnaires. Subjects with neck pain had significantly higher disability scores than those of no neck pain group. However, there were no differences observed between groups in a head-neck posture, neck range of motions, and deep neck muscle endurance time. The smartphone usage time was negatively correlated with neck pain intensity and disability score whereas it had positive relationship with flexibility and posture. Conclusion: Group differences were observed as lower capacity not only for neck specific daily activities but for general functioning in daily routine when the neck pain and no neck pain groups were compared. Therefore, functioning in daily activities should be investigated as prevention for further developing neck pain in smartphone users.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.35-43
• /
• 2024

This study aimed to objectively classify the lateral torso posture types and functions of older women. We used 3D body scan data of 119 women aged 70-85 years from the 6th SizeKorea project. First, we defined three torso axes to represent the lateral torso posture types: posterior waist-back, back-cervical, and whole torso axes. Next, we asked experts to select one of four lateral torso posture types-stooped, straight, leaning back, and swayback postures-by looking at the lateral photographic data of 119 older women. To identify the axis that best represented each lateral torso posture type, a discriminant analysis was conducted using the angle of each of the three torso axes as an independent variable and an expert's visual classification as a dependent variable. Based on the analysis, the whole torso and backcervical axis angles were selected as variables for judging lateral torso posture types. Subsequently, we developed a classification function to determine which of the four lateral torso posture types of a particular participant was applicable for a new individual. The method developed in this study is significant in that it enables the objective classification of the lateral torso postures types of older women.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.4
• /
• pp.387-392
• /
• 2016

Purpose: The aim of this study was to investigate the effects of grooved abutments on abutment screw loosening. Materials and methods: This study was conducted to evaluate the abutment screw loosening after 6 months for 50 patients (51 implants) treated at the department of Prosthodontics in Yonsei University Dental Hospital from March, 2015 to July, 2015. A control group with non-grooved abutment consists of 30 implants, and an experimental group with grooved abutment consists of 21 implants. Astra, Straumann, Implantium, Osstem system were used in the study. The abutments with loose screws cases after a period of 6 months has been investigated, with two kinds of measurements: 1) measuring the additional rotational angle on abutment during placement with the same force, 2) measuring the PTV on bucco-cervical area of implant crown. All data collected has been analyzed by normality test followed by Mann-Whitney test using SPSS program. Results: No complications were reported after 6 months for the 51 implants. Abutment screw loose and crown fracture have not been seen in the study groups. The data collected from the two measurements showed no significant differences between the two groups with P-value 0.576 (average= control group: $7.35^{\circ}$, experimental group: $4.75^{\circ}$) for the additional rotational angle measurement and with P-value 0.767 for PTV. Conclusion: There are no significant differences between the grooved and non-grooved abutment in screw stability. However, further studies with long-term followups and larger group of patients is needed in order to investigate the effects of grooved abutment on screw stability.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.629-636
• /
• 2009

Purposes: Wide scars occurring on the lower face and neck are a source of both functional and esthetic problems. Consequently, we can use skin grafts, pedicled flaps, free flaps, and tissue expansion for the reconstruction of this area. Compared with other reconstruction techniques, tissue expansion is advantageous in that it enables the maintenance of a color and texture similar to that of the adjacent tissue. However, the conventional method of tissue expansion has been reported to lead to an unnatural cervicomental angle and to the deformity of adjacent structures. We have therefore made efforts to prevent these problems through the use of several operative procedures. Methods: Forty-one patients with lower facial and cervical scars underwent tissue expansion. The tissue expansion was performed using a rectangular-shaped Nagosil$^{(R)}$ tissue expansion device. On insertion of the tissue expander, the intermediate area of superficial fat layer was dissected and then the tissue expander was inserted to make a flap that was as thin as possible. In advancement of the flap, a capsule-formed by the tissue expander-was used for the interrupted fixed suture of the flap to the fascia of the platysma muscle of the neck. This procedure was performed multiple times and also performed between the flap and the periosteum of the mandible, such that the tension was removed during the suture of the flap margin. Finally, the patients were fitted with a Jobst$^{(R)}$ facial garment in order to stabilize the operation site at least twelve months. Results: The most prevalent location of the scar was the cheek (15 cases), followed by the chin in 14 cases and the neck in 12 cases. The mean size of scar was $55.7{\pm}39.4cm^2$. Conclusions: Using our procedures, we have experienced no significant deformities and have also achieved a more natural cervicomental angle in the patients.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.209-216
• /
• 2018

This study aimed to investigate the association of the muscle activity around the neck of the operator(dental hygienists') according to the change in the patient's neck angle during a direct visual inspection on the maxillary right-side molar palatal surface. The operators were $4^{th}$ year dental hygiene students, who are future dentalhy gienists, having accurate understanding on and awareness of the location of the operation site, hand fixation, and how to use the tools. Data on the change in the muscle activity around the neck were collected by using surface electromyography and neck goniometer. SPSS statistics 20 was used for statistical analyses including Shapiro-wilk test and one-way ANOVA. As a result, the activities of the operator upper trapezius, cervical erector spinae, and levator scapulae muscles significantly decreased when the patient's head was angled compared to when it was not. For the angle of the operator head, the head bend significantly decreased when the patient's head was angled than when it was not. Based on the study results, it is expected that angling the patient's head when treating his or her teeth will decrease the excessive muscle activity around the neck of the operator, and will reduce muscle fatigue. Therefore, angling the head of the patient while treating his or her teeth is recommended. This suggests that muscle pain caused by repetitive actions in the wrong posture can be reduced.