• 한국전기전자재료학회논문지
• /
• 제29권3호
• /
• pp.164-167
• /
• 2016

In this study, in order to develop relaxor ferroelectric ceramics for refrigeration device application with large electrocaloric effect, PLZT(8/65/35) composition was fabricated using conventional solid-state method. The Curi temperature of this composition PLZT ceramics was $230^{\circ}C$, and the P-E hysteresis loops of the PLZT ceramics as a fuction of temperature became slim by degrees with higher temperatures. The maximum value of ${\Delta}T$ of $0.243^{\circ}C$ in ambient temperature of $215^{\circ}C$ with 30 kV/cm was appeared. It is considered that PLZT ceramics possess the possibility of refrigeration device application.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 추계학술발표강연 및 논문개요집
• /
• pp.93-93
• /
• 1998

• 디지털융복합연구
• /
• 제19권7호
• /
• pp.303-312
• /
• 2021

재료의 융합을 통한 현대도예의 창작 가능성 실험연구, 현대 사회에서는 융합을 통한 새로운 가치의 창출이 새로운 흐름으로 대두되고 있다. 현대 도예가들 또한 다양한 재료와 타 매체와의 결합을 통해 새로운 예술개념의 확장을 시도하는 추세이다. 공예의 다양한 요소 중에서 재료는 필수 요소이자 가장 근간이 되는 표현요소이기에, 다양한 융합의 관점 가운데 재료 간의 융합에 대한 의의를 탐구하고자 한다. 또한 그중 가장 변형의 가능성이 높은 흙과 종이의 결합인 페이퍼클레이에 주목하여 직접적인 실험을 통해 재료와 작품제작 과정에서 창작 가능성을 탐구한다. 2장에서는 융합과 재료에 대한 개념과 의의를 제시하고 현대 도예에서 활용되고 있는 융합의 경향과 재료표현의 작품사례를 소개한다. 3장과 4장에선 앞선 분석의 구조 기반으로 페이퍼클레이 제작 및 시현을 통해 특성과 가능성을 살펴본다. 결과적으로 재료 간의 결합과 같은 융합 현상을 통해 현대도예가 추구해야 할 방향을 제시하고 발전을 위한 잠재적 가능성을 탐색하고자 한다.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.1-6
• /
• 2010

When the ceramic material is being machined, micro crack and brittle fracture dominate the process of material removal. Generally, ceramics are very difficult-to-cut materials and machined using conventional method such as grinding and polishing. However, such processes are generally cost-expensive and have low material removal rate. Machinable ceramics used in this study contain BN powder to overcome these problem and for productivity elevation. This paper focuses on machinability evaluation during end mill process with CNC machining center in this study. Experiment for this purpose is performed for tool wear patterns and mechanism.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.259-262
• /
• 1998

PbTi $O_3$ family ceramics can be used for the piezoelectric transformer using thickness extensional vibration mode because it is a material with the large anisotropy between electromechanical coupling factors $k_{t}$ and $k_{p}$. However, PbTi $O_3$ family ceramics have a difficult poling condition on account of its large anisotrophy. In this study, the structural and piezoelectric properties of (P $b_{0.76}$ $Ca_{0.24}$)[ $Ti_{0.96}$(M $n_{1}$3/S $b_{2/3}$)$_{0.04}$] $O_3$ system ceramics were investigated as a function of poling voltage in order to find the best poling condition.ion.n.n.ion.n.

• Conservation and Restoration of Cultural Heritage
• /
• 제1권1호
• /
• pp.39-48
• /
• 2012

The first twenty-five years of scientific study within Korea on Korean traditional ceramics has been characterized as a bridging effort to understand the rich field of artistic ceramic masterpieces on one hand with analytic results gained from mounds of broken shards and kiln wastes on the other. First shard pieces were collected directly from the waste mounds, but most of the analyzed shards were provided by art historians and museum staffs directly involved in systematic excavations. The scientific study is viewed as one of many complimentary ways in learning about the multi-faceted ceramics culture, ultimately connecting human spirits and endeavors from the past to the present to the future. About 1350 pieces of analyzed shards have been so far collected and organized according to the production location and time period. From the experimental results of the analysis, the compositional and microstructural characteristics of bodies and glazes have been deduced for many kiln sites of Goryeo and Joseon dynasties. Except for a few local kilns, porcelain stone was used as body material in both dynasties. The principle of mixing a clay component with a flux material was used in Korean glazes as was in China. The clay component different from body clay was often used early on. In Gangjin a porcelain material appropriate for whiteware body was mixed for celadon glaze, and in Joseon Gwangju kilns glaze stone was chief clay material. The use of wood ash persisted in Korea even in making buncheong glazes, but in Joseon whitewares burnt lime and eventually crushed lime were used as flux material.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.7-12
• /
• 2009

The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Thus, traditional ceramics are very difficult-to-cut materials. Generally, ceramics are machined using conventional method such as grinding and polishing. However these processes are generally costly and have low MRR(material removal rate). To overcome such problems, in this paper, h-BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 10 and 15%. The purpose of this study is an analysis of endmill's rake angle for appropriate tools design and manufacturing for the machinable ceramics. In this study, Experimental works are executed to measure cutting force, surface roughness, tool fracture, on different axial rake angle of endmills. Cutting parameters, namely, feed, cutting speed and depth of cut are used to accomplish purpose of this paper. Required experiments are performed, and the results are investigated.

• 한국전기전자재료학회논문지
• /
• 제25권12호
• /
• pp.955-960
• /
• 2012

We fabricated piezoelectric unimorph cantilever generators (UCG) using $Pb(Zr_{0.54}Ti_{0.46})O_3$ + 0.2 wt% $Cr_2O_3$ + 1.0 wt% $Nb_2O_5$ (PZCN) piezoelectric thick films, which were produced by a tape casting method. The PZCN thick films were tailored with same width and thickness but different lengths from 7.7 to 57.7 mm in order to evaluate optimized UCG for energy harvesting device applications. When the length of PZCN film was increased, the resonance frequency of UCG was slightly increased from 7 Hz to 8 Hz, which could be due to enlarged area of the highly stiff piezo-ceramic film. However, the output power was proportionally increased with the length of PZCT film and it reached 4.68 mW (1.221 $mW/cm^3$) when the film's length was 57.7 mm under 25 g of tip mass at 8 Hz, which is sufficient for micro-scale device applications.

• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.2073-2080
• /
• 1994

In this paper, a model of material removal in abrasive water jet machining of brittle material is developed, and experimentally evaluated. Abrasive water jet machining proved to yield better material removal rate than other machining techniques for hard and brittle material (alumina ceramics). It was also found that large scale fracture may develop at the exit of the jet from the material. The fracture size was predicted as a function of water jet pressure and size of the hole. Finally, the feasibility of using acoustic emission signals for in-process monitoring of the abrasive water jet machining process is investigated.

• Bulletin of the Korean Chemical Society
• /
• 제25권6호
• /
• pp.843-846
• /
• 2004

Pt nanoparticles loaded on alumina through an impregnation at room temperature was prepared using $K_2PtCl_4$ and acrylic acid as capping material. Transmission electron microscopy showed that the deposited Pt particles indicate ca. 80% cubic shapes with a narrow distribution of 8-10 nm in size. Propylene hydrogenation over the catalyst has been carried out to evaluate their catalytic performance by the values of activation energy. It is determined from the initial rate, reaction order, and rate constant and is found to be $9.7{\pm}0.5$ kcal/mol. This value has been discussed by comparing to those of encapsulated- and truncated octahedral Pt nanoparticles deposited on alumina, respectively, to study influence of the particle size and shape, and capping material used on the activation energy.