• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1218-1219
• /
• 2006

The shrinkage variation of Low Temperature Cofired Ceramics(LTCC) limits the size of the substrates that impose limitations on embedded passive components. This paper focuses on the method of minimizing or controlling planar shrinkage and reducing distortion during firing. The laminated sheets of alumina and glass were sintered at varying temperature, and depending on the amount of the glass ceramics. When the sintered of multi-layer structure with $Al_2O_3/Glass/Al_2O_3$, the glass infiltrated entirely into $Al_2O_3$ layer at the temperature of about $950^{\circ}C$ or higher.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.850-853
• /
• 1991

This paper suggests a triple laminated piezoelectric ceramic filter composed of three piezoelectric ceramic vibrators and two sheets of thin insulator, and an equivalent circuit of the filter and several expressions for the resonant frequency; voltage, current, and power gains under the various loads and frequencies; and phase differences between the input and the output voltages are introduced and simulated from its equivalent circuit when two outputs from the side vibrators are connected in series. Those expressions show that this filter has not only a filtering function but also an amplifying function.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.898-901
• /
• 2006

To fabricate mono layer green sheet (MLGS) of transparent dielectric for PDP front panel, dispersion of transparent dielectric slurry and various properties of green sheets were examined as a function of amount and kinds of organic additives. Sedimentation height and viscosity of slurry were measured to determine proper types and amount of dispersant in non-aqueous system transparent dielectric slurry. Many MLGS having various ratios of the transparent dielectric glass frit, binder and plasticizer were fabricated. Finally we got the transparent dielectric layer of high transparency and free from residual pore might be remained in the gap between the electrodes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1283-1285
• /
• 1994

A three-layered piezoelectric ceramic transducer is fabricated with three piezoelectric ceramic disk transducers and two sheets of thin insulator. Its equvalent circuit is derived from the Mason's model of a thickness-driven piezoelectric transducer. We applied the electric input near its fundamental resonant frequency to the center transducer and connect the output voltages across the left and right transducers in series to the resistor load. Then we investigate the load characteristics at resonant frequencies under various resistor loads and the frequency characteristics near the resonant frequency under no load. Moreover, symbolic expressions for input impedances, voltage ratios, resonant frequencies, and bandwidths have been derived. The values calculated from those symbolic expressions are shown to agree well with the measurement values.

• Structural Engineering and Mechanics
• /
• 제85권1호
• /
• pp.1-14
• /
• 2023

The use of functionally graded materials in applications involving severe thermal gradients is quickly gaining acceptance in the composite mechanics community, the aerospace and aircraft industry. In the present study, a refined sandwich plate model is applied to study the free vibration analysis of porous functionally graded material (FGM) sandwich plates with various distribution rate of porosity. Two types of common FG sandwich plates are considered. The first sandwich plate is composed of two FG material (FGM) face sheets and a homogeneous ceramic or metal core. The second one consists of two homogeneous fully metal and ceramic face sheets at the top and bottom, respectively, and a FGM core. The displacement field of the present theory is chosen based on nonlinear variations in the in-plane displacements through the thickness of the sandwich plate. The number of unknowns and equations of motion of the present theory is reduced and hence makes them simple to use. In the analysis, the equation of motion for simply supported sandwich plates is obtained using Hamilton's principle. In order to present the effect of the variation of the porosity distribution on the dynamic behavior of the FGM sandwich plates, new mixtures are proposed which take into account different rate of porosity distribution between the ceramic and the metal. The present method is applicable to study the dynamic behavior of FGM plates and sandwich plates. The frequencies of two kinds of FGM sandwich structures are analyzed and discussed. Several numerical results have been compared with the ones available in the literature.

• ETRI Journal
• /
• 제28권2호
• /
• pp.182-190
• /
• 2006

The circuit modeling of interdigitated capacitors fabricated by high-k low-temperature co-fired ceramic (LTCC) sheets was investigated. The s-parameters of each test structure were measured from 50 MHz to 10 GHz, and the modeling was performed using these measured sparameters up to the first resonant frequency. Each test structure was divided into appropriate building blocks. The equivalent circuit of each building block was composed based on the partial element equivalent circuit (PEEC) method. Modeling was executed to optimize the parameters in the equivalent circuit of each building block. The validity of the extracted parameters was verified by the predictive modeling for the test structures with different geometry. After that, Monte Carlo analysis and sensitivity analysis were performed based on the extracted parameters. The modeling methodology can allow a device designer to improve the yield and to save time and cost for the design and manufacturing of devices.

• 한국전기전자재료학회논문지
• /
• 제30권8호
• /
• pp.501-507
• /
• 2017

A unimorph piezoelectric cantilever generator with an interdigitated electrode (IDE) was developed for vibration energy harvester applications driven in the longitudinal mode. Hard lead zirconate titanate (PZT) ceramic with a high $Q_m$ of 1,280 was used as the piezoelectric active material. Ten PZT sheets produced by tape casting were laminated and co-fired with an Ag/Pd IDE at $1,050^{\circ}C$ for 2 h. The approximately $280{\mu}m$-thick co-fired PZT laminate with the IDE was attached to a stainless steel substrate with an adhesive epoxy for the fabrication of an IDE unimorph cantilever. Its energy harvesting characteristics were evaluated: an output power of $1.1{\mu}W$ at 120 Hz across the resistive load of $700k{\Omega}$ was obtained, corresponding to a normalized power factor of $4.1{\mu}W/(G^2{\cdot}cm^3)$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.329-329
• /
• 2010

적층 액츄에이터는 우수한 압전특성 및 그 재료가 가진 고유한 특성 때문에 최근 이동통신 단말기용 햅틱 소자 및 PC 와 그 주변기기로 수요가 폭발적으로 증대되고 있으며, 향후에도 CATV 네트워크와 무선통신기기를 비롯한 디지털 통신분야로 응용분야가 확대되리라 예상된다. 적층 액츄에이터에서 발생되는 에너지는 세라믹 그린시트 두께와 전극 면적에 비례하여 변위 및 응력이 증가하게 되므로 고적층형에 대한 필요성이 증대되고 있다. 이러한 고적층 액츄에이터의 경우 소성과정에 서 warpage 및 de-lamination 같은 결함이 발생하기 쉬우므로 그린시트의 균일성 및 전극과의 matching성 확보가 중요한 요소이다. 본 연구에서는 슬러리의 분산성과 시트 내 유기물 함량 최적화 실험을 진행하여 적층 액츄에이터용 그린시트를 최적화 한 후 공정 적용성 및 저온소성 전극인 Ag-Pd 전극과의 매칭성을 확보하고자 하였다. 이러한 후막공정 기술 개선을 통해 적층 액츄에이터를 제조하여 압전 특성을 측정하였다.

• 마이크로전자및패키징학회지
• /
• 제6권3호
• /
• pp.25-35
• /
• 1999

저온동시소성 또는 금속상 저온동시소성 기술은 세라믹 다층멀티칩 기술의 하나로 이 기술을 이용한 모듈은 일반 전기 부품, 고주파 및 자동차 전장에 적용되기 시작하였다. 고온동시소성 기술과 비교하여 저온동시소성 기판의 소성은 그 온도가 $1000^{\circ}C$ 이하에서 이루어지므로 전기전도도가 높은 금, 은, 구리 등의 금속을 이용하여 내부 전극을 형성할 수 있다. 금속상 저온 동시소성 기술은 소성 후의 치수안정성 (x-, y- 방향으로 수축률 0.1 % 이하)의 장점으로 모듈 내부에 수동소자를 내장할 수 있으며, 이러한 장점은 전기적 특성의 향상과 신뢰성 증가를 가져온다. 모듈의 열팽창계수 및 유전율은 조성이나 소성조건을 바꾸어 조정이 가능하다. 본 기술해설에서는 저온동시소성 또는 금속상 저온동시소성 기술에 관한 소개와 장점에 대하여 설명하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.278-279
• /
• 2006

저온동시소성 다층세라믹스 시트 제조시 바인더 함량과 압력 변화에 따른 적층체의 그린밀도, 적층밀도, 바인더 burn out 후 그린밀도, 소결밀도를 고찰하였다. 바인더 함량이 증가함에 따라 slurrly의 유변학적 변화는 그린시트의 유동성 및 충진율을 변화시켜 그린시트의 밀도에 영향을 주었다. 적층 압력을 5~50MPa로 변화시켰을 때 바인더 함량이 12%로 가장 많은 시트의 경우 적층 후 시트의 밀도는 상대적으로 높은 밀도값을 나타내었으나, 바인더 burn out 후에는 상대적으로 낮은 밀도값을 나타내었다. 바인더 함량 변화에 따른 소결 밀도값은 큰 차이를 보이지 않았다.