• 한국세라믹학회지
• /
• 제23권6호
• /
• pp.25-32
• /
• 1986

Phase spearated glass is heterogeneous in microscopic point of view and the heterogeneities affect the structures of glasses. In the present work the phase separation of $BaO-B_2O_3$ glass system was investigated and the effect of $P_2O_5$ on the phase separation and crystallization was also studied in the above system. Experiments such as scanning electron microscopy X-ray diffraction and infrared spectroscopy were performed. Phase separation with $B_2O_3$ rich phase matrix and BaO rich phase droplet was observed for the glasses containing less than 6 mole% of BaO while the opposite morphology of phase separation was found for the glasses containing more than 7 mole% of BaO. Phase separation region was extended up to the glass with 22mole% of BaO when the amount of $P_2O_5$ was increased. The heat-treated glasses crystallized to BaO.$4B_2O_3$$P_2O_5$ hindered the glass from the crystalli-zation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1349-1354
• /
• 2003

Ultrasonic Machining process is an efficient and economical means of precision machining on glass and ceramic materials. However, the mechanics of the process with respect to crack initiation and propagation, and stress development in the ceramic workpiece subsurface are still not well understood. In this research, we investigate the basic mechanism of chemical assisted ultrasonic machining(CUSM) of glass through the experimental approach. For the purpose of this study, we designed and fabricated the desktop micro ultrasonic machine. The feed is controlled precisely by using the constant load control system. During the machining experiment, the effects of HF(hydrofluoric acid) characteristics and machining condition on the surface roughness and the material removal rate are measured and compared.

• 한국세라믹학회지
• /
• 제23권5호
• /
• pp.93-101
• /
• 1986

Microporous glasses were prepared from the 50 $SiO_2-44$ $B_2O_3-6$ $Na_2O$(wt%) parent glass by the phase eparation technique and were characterized by SEM, BET, and Gas Adsorption methods to investigate the possiblity of their use as salt-rejection membranes for reverse osmosis. The conditions of the phase separation for the possible glass membranes were optimized for the given parent glass. The temperature and duration of heat-treatment were desired to be lower(853K) and shorter (1/2~1 hr) respectively. The specific surface areas of porous glasses prepared in this study were about 80~120$m^2$/g and their pore size distribution had a unimodal shape(peak pore radius less than 15$\AA$) It was suggested that the porous glass obtained in this work could be effective for salt-rejection in point of pore size distributions but the way to increase its surface area for the high flux must be studied.

• 대한기계학회논문집B
• /
• 제33권11호
• /
• pp.886-893
• /
• 2009

To develop glass panel vacuum lift system for the post process in module line of FPD(Flat panel display) such as LCD and PDP, new vacuum adsorption parts of this system are proposed. These parts are composed of variable geometry configurations utilizing ceramic porous medium for variable size of glass panels. In order to design this device, detail understanding of flow phenomena in the flow path of vacuum adsorption system is essential. Thus, CFD analysis and designs are performed for several configurations in terms of pressure drop and balancing force at the adsorption side. From the result, new configuration is recommended for optimum design and manufacturing purpose.

• Tribology and Lubricants
• /
• 제11권5호
• /
• pp.114-121
• /
• 1995

An ultrasonic technique using normal-incident compressional waves was used to evaluate the surface and subsurface damage in ceramics produced by Hertzian indentation. Damage was produced by a blunt indenter (tungsten carbide ball) in glass-ceramic, green glass and silicon nitride. The damage was classified into two types; (1) Hertzian cone crack, in green glass and fine grain silicon nitride, and (2) distributed subsurface micro fractures, without surface damage, produced in glass ceramic. The ultrasonic technique was successful in detecting cone craks. The measurement results with the Hertzian cone cracks indicated that cracks perpendicular to the surface could be detected by the normal-incident compressional waws. Also shown is the capability of normal-incident compressional waves in detection distributed micro-sized cracks size of subsurface microfractures.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.471-478
• /
• 1989

In this study we investigated the gelation time of sol which containing mixtures of TEOS with H2O, ethanol, HCl in the preparation of monolithic silica glass through Sol-Gel method. In this case apparent activation energies were observed by Arrhenius equation. We investigated the conversion from gel to glass in drying and heat treatment stages using DT-TG, FT-IR, XRD analysis and dried gel conversed to glass by heat treatment up to 85$0^{\circ}C$. The results of this experiment showed that the gelation time of solutions were promoted when increasing the amount of addition of H2O and HCl catalyst for TEOS and high reaction temperature of solution.

• 한국세라믹학회지
• /
• 제24권2호
• /
• pp.101-110
• /
• 1987

The relative electrical conductivity of vacuum deposited Al films on a soda-lime(2947) and an alumino boro silicate(7809) glass was investigated with the variation of the relative humidity,temperature and film thickness. The structure and microstructure of Al films before and after exposure to the humidity wereexamined by the X-ray Diffractormenter(XRD) and Scanning Electron Microscope(SEM). As the relative humidity increased, the electrical conductivity of Al films on both glasses was decreased. However, the Al films on 7809 glass showed higher conductivity than that of 2947 glass under the same testing conditions. The decreasing of electrical conductivity was caused by the formation of Aluminum hydroxide which was made by the reaction between the aluminum films and water vapor.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 춘계학술대회
• /
• pp.198-201
• /
• 2006

To produce fine structure with uniform surface of barrier ribs in PDP, acid etching process has been used in manufacture process. It is necessary to understand the mechanism of etching, particularly on the interface of ceramic fillers and matrix glass. We investigated the effect of ceramic fillers (ZnO, $Al_{2}O_3$) on the microstructure of borate glass system to find an etching mechanism of barrier ribs. The harrier ribs was etched with a several steps, dissolving a small amount of residual glass, taking out alumina fillers, and removing a cluster type of ZnO fillers and glass matrix.

• 반도체디스플레이기술학회지
• /
• 제5권3호
• /
• pp.33-36
• /
• 2006

To produce a fine structure with uniform surface of barrier ribs in PDP, acid etching process has been used in manufacture process. It is necessary to understand the mechanism of etching, particularly on the interface of ceramic fillers and matrix glass. We investigated the effect of ceramic fillers (ZnO, $Al_2O_3$) on the microstructure of borate glass system to find an etching mechanism of barrier ribs. The barrier ribs was etched with several steps, dissolving a small amount of residual glass, taking out alumina fillers, and removing a cluster type of ZnO fillers and glass matrix.

• 한국세라믹학회지
• /
• 제29권10호
• /
• pp.779-784
• /
• 1992

In producing cordierite glass-ceramics by sintering, following experiments were conducted in order to determine the optimum heat-treatment schedule for high-crystallinity and dense sintered body. The glass composition of 11.67MgO-29.46Al2O3-52.88SiO2-5P2O5-1B2O3 (wt%) was selected on the basis of the early experiment. The 3-step heat treatment schedule was determined by the results of DTA, Dilatometric measurement and high-temperature XRD, where the particle-size-controlled glass powder was used. The degree of densification and the crystallinity were evaluated by the measurement of the bulk density and X-ray scattering intensity. The specimen fired with the optimum conditions showed ${\alpha}$-cordierite phase, relative density ∼98%, crystallinity ∼92%, thermal expansion coefficient ∼30${\times}$10-7/$^{\circ}C$, dielectric constant ∼5.5 and resistivity ∼1.0${\times}$1012 {{{{ OMEGA }}cm, respectively.