• Journal of the Korean Ceramic Society
• /
• v.12 no.1
• /
• pp.16-22
• /
• 1975

The network structure of a glass is known to be cracked by a chemical reaction, diffusion, and ion exchange of alkali ion, formed at the crack tip of the glass surface, when water is present on the glass surface. Since the durability of glass is reduced, due to the fatigue phenomenon mentioned above, pollution problem of glass goods, especially bottle glass, is becoming acute gradually. A static fatigue phenomenon was studied thermodynamically in this paper, and a mechanism of static fatigue, a quality control, and a method of preventing pollution for the main local glass goods were also investigated. The PH of reacted solution and the quantity of extracted alkali were measured at different conditions such as temperature, reacting time, particle size of a crushed glass sample, and the nature of reacting solution. The enthalpy change was calculated from the Arrhenius equation. The results are given below; 1) The absolute value of enthalpy change for the bottle glass was found to be higher than the for the flat glass. 2) The fatigue phenomenon of a glass was more sensitive to the temperature than to the reacting time. 3) The durability of glass in acid solution is stronger than in alkaline solution. 4) The substance which cracks the network structure of glas is considered the hydroxyl ion.

• The Korean Journal of Ceramics
• /
• v.2 no.1
• /
• pp.33-38
• /
• 1996

In thick film resistors, the characteristics of the frit and the reaction between glass frit and conductor material play an important role for their electrical properties. In this study, various glass frits in the system of $60RO{\cdot}20SiO_2$ $15B_2O_3{\cdot}5Al_2O_3$(RO=PbO, ZnO, CdO; mole%) were mixed with $RuO_2$ and coated on 96% alumina substrate. Only the glass frit containing PbO was reacted with $RuO_2$in$RuO_{2+}$-thick film resistor and produced the new crystalline phase of $Pb_2Ru_2O_{65}$. Their electrical resistivities strongly depend on the amount of $Pb_2Ru_2O_{65}$ crystalline phase obtained, which varied with firing temperature. The sheet resistivities of these resistors were varied from $10^3\; to\; 10^6\;{\Omega}/{\Box}$ depending on heat treatment, and the absolute value of TCR was decreased as the heat treatment temperature increaed. However, $RuO_2$ did not reacted with the glass frits containing ZnO nor CdO, and the resulting showed very high sheet resistivities.

• Journal of the Korean Ceramic Society
• /
• v.33 no.6
• /
• pp.617-622
• /
• 1996

• Journal of the Korean Ceramic Society
• /
• v.35 no.7
• /
• pp.726-732
• /
• 1998

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.63.1-63
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.217.1-217
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.125.2-125
• /
• 2002

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.11a
• /
• pp.53-53
• /
• 1998

• Journal of the Korean Ceramic Society
• /
• v.45 no.8
• /
• pp.464-471
• /
• 2008

The electrolyte separator for thermal battery should be easily handled and loaded a large amount of the molten salt. Ceramic fibers, especially fibrous commercial glass filters were used as an electrolyte separator and the lithium based molten salts were infiltrated into the ceramic filters. The pore structures of the ceramic filter and the melting properties of the lithium salts affected to the electrolyte loading and leakage. During the infiltration, ions of $Li^+$ and $F^-$ in the molten salts were reacted with the glass fiber and caused to be weaken the fiber strength.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.27-34
• /
• 1986

In the present study an attempt was made to synthesize $10TiO_2$.$90SiO_2$ glass by Sol-Gel process. Tetra-ethyl-ortho-silane and titanium-iso-propoxide were used as precursors. As the mutual solvent ethanol and iso-propanol were used. TEOS was partially hydrolyzed with one-fold mole of $H_2O$ prior to the reaction with titanium-iso-propoxide to control the difference of hydrolysis rate of the two metal alkoxides. At gelling temperature higher than 6$0^{\circ}C$ it was difficult to obtain monolithic gels. At such a low temperature as 85$0^{\circ}C$ clear amorphous gel derived glass with Si-O-Ti bonding was obtained.