• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.153-163
• /
• 1995

In this study, Receiver Operating Characteristic(ROC) analysis was used to evaluate the ability of cephalometric measurements to identify patients with Class III malocclusions. ROC analysis is the method for determining the validity of a diagnostic measure and for evaluating the relative value of diagnostic tests. The sample consisted of 496 patients with malocclusion. Class III malocclusion is defined as the dental relationship for which The mesiobuccal groove of the lower first molar is deviated mesially from the mesiobuccal cusp of the upper first molar. Of the total sample of 496 patients, 245 had Class III malocclusions. 16 cephalometric measurements were selected, each of which was treated as a diagnostic test. The ROC curves were generated for each cephalometric measurement with intervals of $1.0^{\circ}$ for angular measurements, 1.0mm for linear measurements. The area under the ROC curves was measured for direct comparison among different diagnostic tests. The results were as follows; 1. The 'Wits' appraisal was found to be a better diagnostic criterion for the presence of Class III malocclusion than any other commonly'used cephalometric measurement. 2. AB plane angle, ANB angle, App-Bpp distance, AF-BF distance, APDI, Distance of point A and Pog to N perpendicular, maxillomandibular differential had high diagnostic value. 3. Cephalometric measurements which evaluate the position of the mandible had moderate diagnostic value. 4. Cephalometric measurements related to the maxilla discriminated least between patients with and without Class III malocclusion.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.75-83
• /
• 1998

This study was done to recognize the importance of errors in measurements of cephalometric radiograph and to find the anatomical structures those need special care to select as a reference points through the detection of the systematic errors and estimation of random errors. For this purose, 100 cephalometric radiographs were prepared by usual manner and 61 reference points, and 130 measurement variables were established. Measurement errors were detected and estimated by the comparison of the 25 randomly-selected samples for repeated measurements with the main sample. The following results were obtained : 1. In comparison of the repeated measurements, there were statistical significant differences in 24 variables which were 18.4% of 130 total variables. 2. The frequency of the difference in identification of the reference points between the repeated measurements was very high in the root apex of upper incisor(as), the most posterior wall of maxilla(tu), soft tissue nasion(n'), soft tissue frontal eminence(ft), and ad3 in airway. 3. After correction of reference points marking until the level of below 5% significance, the range of random errors were from 0.67 to 1.71 degree or mm. 4. The variable shown the largest random error was the interincisal angle(ILs-ILi). 5. Measurement errors were mainly caused by the lack of precision in anatomic definitions and obscure radiographic image. From the above results, the author could find the high possibility of errors in cephalometric measurements and from this point, we should include error analysis in all the studies concerning measurments. In is essential to have a concept of error analysis not only for the investigator but also for a reader of other articles.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.521-534
• /
• 1994

The purpose of this study was to compare the differences in measurements between cephalometric radiographs and digigraphs of Dolphin Imaging System. 26 Korean adult male and 24 adult female with normal occlusion were selected. For each subject lateral cephalogram was taken. Digitizing with Digigraph Work Station of Dolphin in System. was performed as well. 50 tracings and 50 digigraphs were analyzed with Yonsei, Ricketts, Burstone analyses. The comparable measurements between tracing group and digigraph group were statistically analyzed. The results were as follows: 1. 13 of 64 comparable measurements did not show any statistically significant difference (P>0.05) between tracing group and digigraph group. 2. Three of the measurements with FH plane as a reference plane did not show any statistically insignificant difference. All measurement with SN plane as a reference plane showed statistically significant difference(p<0.05). 3. The measurements which showhed no statistically significant difference were mostly short distance linear measurements while most of the angular measurements showed statistically significant difference(p<0.05).

• The korean journal of orthodontics
• /
• v.45 no.2
• /
• pp.82-88
• /
• 2015

Objective: The aim of this study was to evaluate the reliability of measurements obtained after the superimposition of three-dimensional (3D) digital models by comparing them with those obtained from lateral cephalometric radiographs and photocopies of plaster models for the evaluation of upper molar distalization. Methods: Data were collected from plaster models and lateral cephalometric radiographs of 20 Class II patients whose maxillary first molars were distalized with an intraoral distalizer. The posterior movements of the maxillary first molars were evaluated using lateral cephalometric radiographs (group CP), photocopies of plaster models (group PH), and digitized 3D models (group TD). Additionally, distalization and expansion of the other teeth and the degrees of molar rotation were measured in group PH and group TD and compared between the two groups. Results: No significant difference was observed regarding the amount of molar distalization among the three groups. A comparison of the aforementioned parameters between group PH and group TD did not reveal any significant difference. Conclusions: 3D digital models are reliable to assess the results of upper molar distalization and can be considered a valid alternative to conventional measurement methods.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.17 no.1
• /
• pp.89-106
• /
• 1987

The author obtained individualized lateral cephalometric tomograms from 23 young adults (46 of left and right normal TMJ) with normal occlusion and 20 patients (14 of patient asymptomatic TMJ and 26 of patient symptomatic TMJ) with clicking and painful TMJ after the analysis of submental vertex view. Individualized lateral cephlometric tomogram analysis and TMJ space analysis were performed after tracing each film. All data from these analysis was recorded and statistically processed with CYBER computer system. 1. The results were obtained as follows. In submental vertex view, the mean condylar angulation of Rt. side in normal group was 20.348°±6.358°, Lt. side was 18.870°±7.777° and Rt. side in patient group was 19.350°±7.576° Lt. side was 17.750°±6.146° respectively. The mean condylar angulation of Rt. side was larger than Lt. side in normal and patient group. 2. When the mandible was moved from centric occlusion to centric relation, condylar position relating to the glenoid fossa was placed posteriorly and superiorly in normal TMJ group and patient symptomatic TMJ group. 3. In centric relation position, the proportion of anterior space to posterior space was 1.593 for normal TMJ group, 1.604 for patient asymptomatic TMJ group and 1.671 for patient symptomatic TMJ group. In centric occlusion position, 1.390 for normal TMJ group, 1.539 for patient asymptomatic TMJ group and 1.196 for patient symptomatic group. Normal TMJ group, patient asymptomatic TMJ group and patient symptomatic TMJ group and patient symptomatic TMJ group revealed significant difference in ∠C₂ measurement. (ANOVA-test, p<0.05) 5. Normal group and patient group revealed significant difference in Fh, ∠C₁and ∠C₂ measurement. (T-test, p<0.05) 6. There were strong positive correlation (0.8771) between Fp and Fm, and strong negative correlation (-0.9039) between ∠C₂ and ∠C₁ from the lateral cephalometric tomogram analysis.

• The korean journal of orthodontics
• /
• v.45 no.6
• /
• pp.282-288
• /
• 2015

Objective: This study investigated whether it is possible to use a two-dimensional (2D) standard in three-dimensional (3D) analysis, by comparing the angles and lengths measured from a midsagittal projection in 3D cone-beam computed tomography (CBCT) with those measured by 2D lateral cephalometric radiography (LCR). Methods: Fifty patients who underwent both LCR and CBCT were selected as subjects. CBCT was reoriented in 3 different methods and the measuring-points were projected onto the midsagittal plane. Twelve angle values and 8 length values were measured on both LCR and CBCT and compared. Results: Repeated measures analysis of the variance revealed statistically significant differences in 7 angular and 5 linear measurements among LCR and 3 types of CBCT (p < 0.05). Of these 12 measurements, multiple comparisons showed that 6 measurements (ANB, AB to FH, IMPA, FMA, Co-Gn, Go-Me) were not significantly different in pairwise comparisons. LCR was significantly different from 3 types of CBCT in 3 angular (SN to FH, interincisal angle, FMIA) and 2 linear (S-Go, Co-ANS) measurements. The CBCT method was similar for all measurements, except for 1 linear measurement, i.e., S-N. However, the disparity between the mean values for all parameters was within the range of clinical measurement error. Conclusions: 3D-CBCT analysis, using midsagittal projection, is a useful method in which the 2D-LCR normative values can be used. Although the measurements changed with reorientation, these changes were not clinically significant.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.4 no.1
• /
• pp.21-30
• /
• 1974

A study was performed to investigate the degree of similarities and differences in components of craniofacial complex between Korean twins and normal children by lateral cephalometric analysis. Dimensions of S-N, S-Ba, N-Ba, Go-Me, Ar-Go and Ar-Me were against linear measurement and angles of N-S-Ba and gonial against measurement in twins and control groups. The lateral cephalograms of twin were composed of 88 twins aged from 7 to 12:44 males aged 10.65 and 44 females aged 9.55, while those of 50 normalities were composed of 25 males and 25 females aged 10.9 respectively. In order to analyze growth proportion and sexual differences, twins were divided into 3 groups according to two year age intervals and the author compared male with female in 3 groups. For the purpose of observing similarities and differences in twins and normalities by sex, total twins were compared with normalities. The obtained results were as follows: 1. There was no difference in craniofacial complex between plotted angular normalities. 2. In general, the measurements of male were larger than both twins and normalities, but there were no statistical sexual differences in both groups. 3. The growth proportion of mandible by aging was larger than that of face twins and those of female significances of in twins. 4. The growth pattern of gonial angle showed slightly reducing tendency in twins by aging. 5. There was little difference in the growth proportion of both male and female.

• The korean journal of orthodontics
• /
• v.22 no.4 s.39
• /
• pp.755-778
• /
• 1992

It is prerequisite of orthodontists to diagnose malocclusion correctly and make treatment plans accurately for treating maloccluded patients efficiently and earning more stable and better results. Recently computers were introduced in orthodontic diagnosis steps, which enabled orthodontists to get more precise diagnosis, to make more accurate treatment planning and to provide better orthodontic cares for more patients. The authors studied on the diagnostic analysis methods which have been used frequently in Korea and made a diagnostic computer program including the horizontal and/or vertical measurement of length, degrees and proportions in lateral cephalometric radiographs, the analysis of the skeletal and soft-tissue features and the evaluation of the treatment results. We also made a scheduling program for arrangement and management of patients. 40 skeletal and 24 soft-tissue landmarks were selected in a lateral cephalometric radiographs. The available analysis methods in this program are Angular analysis, Linear analysis, Ricketts analysis, Profilogram , Steiner analysis, Tweed analysis, MacNamara analysis, Open bite analysis, Kim's diagnosis, Skeleto-dental cephalometric analysis and Height & weight analysis. We suggested that this diagnostic computer program make it possible for orthodontists to get more rapid and accurate diagnostic analysis and treatment planning and for patient to earn better and more efficient orthodontic service.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.565-606
• /
• 1993

The purpose of this study was to evaluate the change of before and after treatment of anterior openbite malocclusions treated by Multiloop Edgewise Archwire technique. The openbite sample consisted of 4 male and 12 female adults, treated with nonextraction or third molar extraction. The normal sample consisted of 58 subjects, which have pleasing facial profile and normal occlusion and no experience of orthodontic or prosthodontic treatment. The 58 subjects of normal sample were subdivided by cephalemetric vertical relationship of face. The 40 subjects, cephalometric vertical relationship of face was in normal range, classified as Normal Sample group 1. The 18 subjects, increased cephalometric vertical relationship of face, classified as Normal Sample group 2. The computerized cephalometric analysis was accomplished with 50 reference points for 22 skeletal measurements, 46 dentoalveolar measurements, 8 soft tissue measurements. Statistical analysis of the data was carried out with paired t-test, Student's t-test, and DUNCAN test using SAS(PC version), The results were as follows : 1. There were no statistically significant differences in skeletal measurement between before and after treatment. The major changes were in dentoalveolar region. 2. After treatment, the long axis of maxillary and mandibular posterior teeth were distally tipped-back, and uprighted to bisected occlusal plane. The interincisal angle was increased. 3. There were no statistically significant increase in the upper posterior dental height and statistically significant decrease in the lower posterior dental height. The upper anterior dental height was increased, but there was no statistically significant increase in the absolute upper anterior dental hight. The lower anterior dental height was increased. 4. After treatment, the maxillary occlusal plane to palatal plane angle and the mandibular occlusal plane to mandibular plane angle were statistically significant increased. Then, there were no statistically significant difference between after treatment group and normal sample group 2. 5. After treatment, the percentage of upper lip length to upper anterior dental height was decreased. Then, There were no statistically significant difference between after treatment group and normal sample group 2.

• The korean journal of orthodontics
• /
• v.6 no.1
• /
• pp.39-46
• /
• 1976

This study was undertaken to establish the cephalometric standards, using lateral cephalometric roentgenograms of 48 male and 53 female Korean adults with normal occlusion and acceptable profile. By Cohen's method, measurement of depth was taken parallel to the FH plane and expressed as a percentage of the cranial base depth (BA-N). And vertical height was measured along the line perpendicular to the FH plane and expressed as a percentage of the anterior face height (N-M). The following conclusions were obtained: 1) Means and standard deviations of craniofacial proportions of Korean adults were tabulated. 2) Cranial babe depth of male was greater than that of female. 3) The proportionate depth of the middle face was greater in female than in male. 4) The proportionate total anterior face height was greater in male than in female. And it was greater in Korean than in the white.