• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.576-581
• /
• 2010

As a super high speed small-sized centrifugal separator which is operated by the center inputting method has solved two difficulty problems, it can be made use of developing the new composition through the making of Nano particle (50~100nm) by high speed revolution and alleviation of unbalanced shapes inside the disk continuously throwing slurry in the central part. Uses the air spindle and the centrifugal machine production will be able to manufacture the Roh class fine particle under boil.

• Tribology and Lubricants
• /
• 제30권2호
• /
• pp.92-98
• /
• 2014

Transmission fluid film behaviors in the gap between the wet clutch pad and separator plate are analyzed using the CFD software ADINA. Three pattern groove designs are selected and are used to validate the fluid film behaviors based on the outlet flow in the gap when the wet clutch pad and separator plate are engaged. The main design goal for pattern grooves is faster engagement. In most cases, much of the outlet flow of transmission fluid in the gap occurs on the outer radius boundary due to the centrifugal force generated by the clutch pad circular motion. Groove patterns are created to ensure faster transmission fluid outlet flow in the direction of the inner radius boundary. Computational results of the selected groove patterns are compared.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.469-472
• /
• 2008

본 연구에서는 경제성, 환경부하저감성 및 순환잔골재의 품질개선효과가 우수한 순환잔골재 건식생산기술로서 고속회전충격식 비중분리장치 및 원심력 미분말 집진장치 등으로 구성된 건식생산시스템을 개발하고 순환잔골재의 품질을 평가하여 성능을 검증하고자 한다. 그 결과 고속회전충격에 의한 순환잔골재의 파쇄작용, 원심력 및 질량차에 의한 미분말과 미세분진의 분리 및 집진작용, 질량차에 의한 미세립분의 분리 회수에 의해 표준입도, 절건밀도 등 순환잔골재의 품질개선에 효과가 있는 것으로 확인되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.664-667
• /
• 2001

Segregation of binary particle systems in a horizontally gyrated bed has been experimentally studied to recover the heavy metals from municipal waste incineration (MWI) ash. Differences in density and size had less effect on segregation. Effective segregation took place under the centrifugal effect of 1 or less for any particle size ratio. Zn, Cu and Pb were concentrated in the upper side of bed by the horizontal vibration. However, there was less change in concentration for other metals such as Mg, Al and Fe etc. The separation system with the horizontal gyrating separator proved to be an effective method for the pretreatment of recovering Zn, Cu and Pb from incineration residues.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.586-592
• /
• 2004

In this study, the failure analysis of a decanter is carried out and the methods of performance improvement are presented. The decanter is a centrifugal separator that is used to separate water and solids from municipal and industrial sludge. Therefore, the decanter should be designed to improve the dewatering of sludge. Besides high performance, the decanter should guarantee its life time under a severe using condition. For theses reasons, the failure analysis and performance improvement of the decanter are studied. It is found from this study that the failure is caused by mass unbalance, wear, clogging or crack. If these failure causes are prevented, the life time as well as the performance is expected to be improved.

• 청정기술
• /
• 제19권1호
• /
• pp.30-37
• /
• 2013

본 연구에서는 함수율 32.3 wt%인 저등급 석탄을 유중증발 건조한 후 고속 원심분리 장치에서 기름을 분리하여 연료 특성을 분석하였으며, 유중증발 건조시간이 6, 10분일 때 석탄의 함수율은 각각 5.0, 4.2 wt%까지 감소하였다. 유중증발 건조 후 석탄의 고위발열량은 11,442.0 kJ/kg-wet에서 27,816.0 kJ/kg-wet로 증가하였다. 유중증발 건조한 석탄을 상온에서 원심분리장치로 기름을 분리한 석탄의 기름 함량은 15.0 wt%이나 건조 석탄을 80, 100, $120^{\circ}C$로 재가열하여 기름을 원심분리하면 각각 9.7, 9.3, 8.5 wt%로 줄어들었으며 석탄 직경별 기름 함량차이는 미약하였다. 원심분리 장치에서 회수한 기름은 유중증발 건조용 기름으로 재사용한다. 저등급 석탄을 대상으로 열중량분석(thermogravimetric analysis, TGA)을 수행한 결과, 건조 후 $120^{\circ}C$로 재가열한 석탄은 석탄입자 크기에 따른 무게변화는 거의 없었으며 이것은 원심분리 장치 성능이 석탄입자의 크기에는 영향을 받지 않기 때문이다. 또한, 미분열중량 분석(derivative thermogravimetry, DTG)을 수행한 결과에 의하면 원시료 석탄은 $400^{\circ}C$에서 휘발분이 가스화되면서 피크가 나타났고 유중증발 건조한 석탄의 경우 $350^{\circ}C$에서 1차 피크, $400^{\circ}C$에서 2차 피크가 발생하였다. 1차 피크는 유중증발 건조과정 중에 석탄내부의 수분과 치환된 기름 때문으로 사료되었다. 또한, $80^{\circ}C$, $100^{\circ}C$, $120^{\circ}C$로 재가열하여 기름을 분리한 석탄시료들의 피크가 기름을 분리하지 않은 석탄의 피크보다 작은 것은 원심분리 장치에 의해 기름이 일정량 분리되었기 때문이다.

• 자원리싸이클링
• /
• 제23권6호
• /
• pp.30-39
• /
• 2014

코로나 방전 정전선별기 내에서 인쇄회로기판(Printed Circuit Board, PCB) 분쇄 입자의 이동궤도를 전산 모사하였다. 여기서 PCB입자는 전자부품 분리된 기판을 파쇄한 것으로, 대부분 구리와 FR-4(Flame Retardant Level-4)로 이루어져있다. 우선 입자가 선별기내 회전전극으로부터 탈착 지점을 계산하였으며, 중력, 원심력, 정전기력의 평형으로부터 유도되었다. 한편 탈착 후 이동궤도는 입자의 운동방정식으로부터 구한 가속도를 시간 적분하여 계산하였다. 시뮬레이션 변수는 입자의 크기, 공급전압의 세기, 회전전극속도 및 유도전극 각도로 하였다. 입자 이동궤도에 미치는 영향은 구리 입자의 경우에는 회전속도가 주요 변수였으나, 반면 FR-4 입자의 경우에는 상기 모든 변수에 영향을 받는 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제23권9호
• /
• pp.736-740
• /
• 2010

Nickel wires of 0.8 mm in diameter and 80 mm in length were electrically exploded in liquid media such as water, ethyl alcohol. The distribution of particle sizes was broad from a few micrometers to tens of nanometer. It was identified that the particles could be classified according to its sizes by using centrifugal separator. The powder prepared in distilled water showed mainly pure metallic Ni phase although a little oxide phase was observed. The powders prepared in ethyl alcohol showed complicated unknown phases, which is attributed to the compound of carbon in the organic liquid. This unknown phase was turned to pure metallic Ni phase after heat treatment.

• 설비공학논문집
• /
• 제23권2호
• /
• pp.126-131
• /
• 2011

Cyclone, a type of particle collector widely used in the field of ambient sampling and industrial particulate control, is the principal type of gas-solids separator that uses a centrifugal force. The goal of this study is to design and evaluate the cyclone that can be used for the household vacuum cleaners. A multi cyclone with a 1st cyclone and several 2nd cyclones is designed to improve dust collection efficiency. The dust collection efficiency and the suction power of 1st cyclone are evaluated. And the dust collection efficiency and the suction power of multi cyclone are evaluated according to various sizes of inlet and vortex finder. As a result, a cone shape porous filter has better dust collection efficiency than a cylinder shape porous filter. The dust collection efficiency of a multi cyclone is 3.5% greater than that of a single cyclone.

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.17-23
• /
• 2021

A cyclone is a dust-separating mechanism that works on the principle of centrifugal force. The performance of a cyclone is evaluated using pressure loss and collection efficiency. A multi-cyclone arrangement is used to improve the collection efficiency within a limited area. In this study, experiments and numerical analyses were conducted on a dual arrangement of mini-hydrocyclone separators, which was fabricated using 3D printing. The experiment was performed at an inlet flow rate of 0.7 m/s, and alumina powder with a particle size of 0.5, 15, and 50 ㎛. ANSYS FLUENT, was used for the numerical analysis. The reliability of the numerical analysis was verified through a comparison with the experimental results. The errors in the experiment and numerical analysis were confirmed to be 2% at the outlet flow rate.