• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.200-210
• /
• 2000

본 연구에서는 고속의 원심압축기에서 스톨 발단에 관한 연구를 수행하였다. 스톨을 일으키는 요인과, 스톨이 발생하기 전에 이를 미리 경고할 수 있는 방법을 주된 연구 주제로 삼았다. 원주방향으로 균일하게 분포된 8개의 고속응답 압력변환기를 사용하여 순간압력을 측정하였으며, 이 신호를 공간 푸리에 변환(space Fourier transform)을 사용하여 스톨의 발단을 알리는 신호를 측정하였고, 회전하는 파의 에너지(Traveling Wave Energy) 방법을 사용하여 스톨을 미리 경고하는 방법에 대하여 연구하였다. 회전하는 파의 에너지 방법은 스톨을 경고하는 데 좋은 성능을 보였으며, 저속에서는 약 임펠러 100회전, 중간속도에서는 약 200회전, 그리고 고속에서는 약 임펠러 1000회전의 경고시간을 보였다. 그리고 스톨 발단 근처에서 공간 푸리에 계수의 위상이 임펠러 주파수의 속도로 선형적인 증가를 보이는 구간이 나타났으며, 또한 임펠러 주파수의 스펙트럼이 스톨로 접근하면서 증가하는 것으로부터, 임펠러 주파수가 스톨을 일으키는 중요한 요인으로 작용함을 알 수 있었다. 또한 임펠러의 회전속도에 관계없이 스톨로 접근하면서 임펠러 주파수의 스펙트럼이 증가하므로, 이 값이 스톨을 경고하는 방법으로 사용될 수 있음을 보였으며, 약 임펠러 2n회전의 경고시간을 얻을 수 있었고, 임펠러의 속도가 빠를수록 긴 경고시간을 얻었다. 이 방법의 개발로 하나의 센서의 측정만으로도 효과적으로 스톨을 경고할 수 있는 기반을 마련하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제5권3호
• /
• pp.100-108
• /
• 2012

Design parameters for suction channels of process centrifugal compressors were investigated, and an optimization method to enhance stage efficiency by using the new design parameters was proposed. From results of computational fluid dynamics, the passage sectional area ratios $A_c/A_e$, $A_e/A_s$ and $A_c/A_s$ were found to be the dominant parameters for the pressure loss and circumferential flow distortion, where $A_c$, $A_e$ and $A_s$ are passage sectional areas for the casing upstream side, casing entrance and impeller eye, respectively. The Base suction channel was optimized using the new design parameters, and the Base and Optimized types were tested. Test results showed that the Optimized suction channel achieved 3.8% higher stage efficiency than the Base suction channel while maintaining the same operating range.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.942-949
• /
• 2014

In this paper, a new steering system for a self-balancing electric scooter is proposed with an intuitive steering command input method, where the steering command is generated from the rider's motion of shifting body to move the center of gravity toward the rotational direction. For the purpose, weight distributions on the rider's feet are measured using force sensors placed beneath the rider's feet, and the difference is applied to a steering control system. Stability of the steering system and resultant radius of gyration is investigated by modeling the steering system in consideration of the rider's motion and centrifugal force. The proposed steering system is applied to experiments, and the results are presented to prove the validity of the proposed method.

• 한국항공우주학회지
• /
• 제35권9호
• /
• pp.805-815
• /
• 2007

단일추력의 정상 작동 상태의 액체 로켓 엔진 시스템 모듈화 프로그램을 작성하기 위한 선행 연구로 엔진 주요 구성품들에 대한 성능설계 프로그램을 작성하였다. 주요 구성품으로는 추력실, 원심형 펌프, 충동형 터빈, 재생 냉각 채널 등이 고려되었다. 복잡성을 피하기 위하여 열역학적 관계식 및 비점성 이론을 바탕으로 한 여러가지 관계식들과 간략한 수학적 모델을 사용하였다. 본 논문에서는 도출된 결과를 정성적으로 살펴보고, 주요 설계 파라미터를 바꿔가면서 구성품의 작동특성 변화에 대한 경향성을 검토함으로써 일반적인 구성품 설계 이론에 부합하는가를 확인하였다.

• 대한토목학회논문집
• /
• 제10권1호
• /
• pp.135-143
• /
• 1990

암반(岩盤)에 작용하는 응력(應力)을 측정(測定)하는데 사용되는 FLATJACK의 원리(原理)를 이용하여, 흙을 둘러싼 강성경계면(剛性境界面)에 작용하는 연직압력(鉛直壓力)을 측정(測定)할 수 있는 압력계(壓力計)를 개발이용(開發利用)하였다. 본(本) 논문(論文)에서는 새로이 제작(製作)된 토압계(土壓計)의 메카니즘, 압력반응(壓力反應)에 대한 보정계수를 얻는 과정 및 모형실험(模型實驗)에 사용한 결과(結果)에 대하여 서술하였다. 이 계기(計器)를 보강토(補强土)옹벽의 원심모형실험(遠心模型實驗)에 장치하여 모형저면(模型底面)의 강성지반(强性地盤)에 작용(作用)하는 연직압력(鉛直壓力)을 측정하였다. 측정결과치(測定結果値)와 사다리꼴 연직응력분포(鉛直應力分布)의 이론치(理論値)를 비교함으로써 이론(理論)의 타당성(妥當性)을 검증(檢證)하였다.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.386-394
• /
• 2002

The present work is aimed at investigating an unusual variation in flow and performance characteristics of a small propeller fan at low flow rates. A performance test of the fan showed dual performance characteristics, i.e., radial type characteristics at low flow rates and axial type at high flow rates. Dual performance characteristics of the fan are numerically investigated using viscous flow calculations. The Finite Volume Method is used to solve the continuity and Navier-Stokes equations in the flow domain around a fan. The performance parameters and the circumferentially averaged velocity components obtained from the calculations are compared with the experimental results. Numerical values of the performance parameters show good agreement with the measured values. The calculation simulates the steep variations of performance parameters at low flow rates and shows the difference in the flow structure between high and low flow rates. At a low flow coefficient of $\Phi$=0.2, the flow enters the fan in an axial direction and is discharged radially outward at its tip, which is much like the flow characteristics of a centrifugal fan. The centrifugal effect at low flow rates makes a significant difference in performance characteristics of the fan. As the inlet flow rate increases, flow around the fan changes into the mixed type at $\Phi$=0.24 and the axial discharge at $\Phi$=0.4.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권2호
• /
• pp.56-66
• /
• 1995

Recently, with theraped advancement in th oceanology such an ocean-going vessel and oceanic structures, there is a need to study the cavitation erosion-corrosion control of pump impeller, the partial element of ocean machinery, for more effective operation. Especially, the cathodic protection (impressed current method & Al-sacrificial anode method) was applied to sea water, and Cu-alloy material mixed Zn & Al was used as a control method of cavitation erosion-corrosion. In this study, used the piezoelectric vibrator with 20KHz, 24.mu.m to cavity generation apparatus, and investigated the weight loss, weight loss rate, electrode potential & current density etc. under this condition. According to test result, thos describes how to indentify an influence of the cathodic protection and Al & Zn addition in material development for the control of cavitation erosion-corrosion, and those will serve as fundamental data on the cavitation erosion-corrosion control of oceanic centrifugal pump.

• 한국정밀공학회지
• /
• 제28권6호
• /
• pp.738-744
• /
• 2011

The reliability of blade root fixing section is required to endure the centrifugal force and vibration stress for the last stage blade of steam turbine in thermal power plant. Most of the domestic steam turbine last stage blades have finger type roots. The finger type blade is very complex, so the inspection had been performed only on the exposed fixing pin cross-section area due to the difficulty of inspection. But the centrifugal force and vibration stress are also applied at the blade root finger and the crack generates, so the inspection method for finger section is necessary. For the inspection of root finger, inspection points were decided by simulating ultra-sonic path with 3D modeling, curve-shape probe and fixing jig were invented, and the characteristics analysis method of ultrasonic reflection signal and defect signal disposition method were invented. This invented method was actually executed at site and prevented the blade liberation failure by detecting the cracks at the fingers. Also, the same type blades of the other turbines were inspected periodically and the reliability of the turbine increased.

• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.260-265
• /
• 2013

To increase the machine accuracy by improving the stiffness of spindle bearings, preload was applied to the spindle bearings. The methods of fixed position preload, convertible preload, constant pressure preload, and variable preload are used to apply the preload to the spindle bearing. The previous studies performed by the author of this study were variable preload methods using rubber pressure and centrifugal force based on mechanical systems. This study proposed a toggle joint mechanism that could be applied to variable preload method using centrifugal force and rubber pressure to increase the preload. Also, a finite element analysis was conducted to predict the deformation of the rubber and change of the preload. And the analysis results showed that the preload by the device using rubber pressure only was increased by the toggle joint mechanism using rubber pressure.

• 한국지진공학회논문집
• /
• 제17권5호
• /
• pp.209-217
• /
• 2013

In order to verify the reliability of numerical site response analysis program, both soil free-field and base rock input motions should be provided. Beside the field earthquake motion records, the most effective testing method for obtaining the above motions is the dynamic geotechnical centrifuge test. However, need is to verify if the motion recorded at the base of the soil model container in the centrifuge facility is the true base rock input motion or not. In this paper, the appropriate input motion measurement method for the verification of seismic response analysis is examined by dynamic geotechnical centrifuge test and using three-dimensional finite difference analysis results. From the results, it appears that the ESB (equivalent shear beam) model container distorts downward the propagating wave with larger magnitude of centrifugal acceleration and base rock input motion. Thus, the distortion makes the measurement of the base rock outcrop motion difficult which is essential for extracting the base rock incident motion. However, the base rock outcrop motion generated by using deconvolution method is free from the distortion effect of centrifugal acceleration.