• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.253-258
• /
• 2006

본 연구는 우리나라 RCC/RSC의 효율성을 2개의 입력변수와 5개의 출력변수를 자료를 토대로 퍼지 DEA를 이용하여 측정 평가하였다. 특히, 본 연구에서는 해양사고 발생자료 뿐만 아니라 환경스트레스치에 의한 잠재적 해양사고 발생가능 자료도 고려하여 운영효율성을 분석하였다. 한편, 현실자료에는 수많은 애매성이 존재하기 때문에 본 연구에서는 DEA법에 퍼지이론을 이용한 퍼지 DEA 법을 이용하였다. 이 퍼지 DEA법은 ${\alpha}-cut$ 을 기반으로 한 크리습 선형계획문제로 변환된 것으로 입/출력 변수를 삼각형 퍼지수로 하여 해를 산출하는 방법을 제안하였고, 제안된 퍼지 DEA를 이용하여 퍼지 RCC/RSC의 순위를 결정하였다. ${\alpha}-cut$를 0.5 로 하여 효율성을 산출한 결과 YS, BS, MP, TS, JJ, PH, US, IC, SC, DH, GS, TA, WD RCC/RSC 순으로 효율성 이 높게 나타났다. 따라서 효율성이 비교적 낮게 평가된TA, WD RCC/RSC는 효율성이 높은 준거집단을 참조하여 벤치마킹을 해야할 필요가 있다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제2권2호
• /
• pp.97-109
• /
• 1998

A comparison of the two dimensional heat loss, computed using the analytical method and the finite difference method in two models(i.e. one is a parabolic fin whose parabolic curves meet at the fin center line and the other is a transformed parabolic fin whose tip cuts vertically), is made assuming the analytical method is correct. For these methods, the root temperature and surrounding convection coefficients of these fins are assumed as constants. The results show that the relative errors of the heat loss between the two methods for the parabolic fin whose tip cuts vertically are smaller than those for the one whose tip does not cut. In case of Bi=0.01, the values of the heat loss obtained using a finite difference method are close to those values obtained using the analytical method for both models. The values of the heat loss from both models calculated by using the analytical method are almost the same for given range of non-dimensional fin length in case of Bi = 0.01 and 0.1.

• 한국수자원학회논문집
• /
• 제44권7호
• /
• pp.511-522
• /
• 2011

적응적 메쉬세분화기법과 분할격자기법을 적용한 2차원 천수방정식모형을 활용하여 구조물을 고려한 극한 홍수 실험을 모의하였다. 본 연구에 사용된모형은 두 격자생성 기법을함께 사용함으로서 복잡한 경계를보다 적은 격자로 효율적으로 표현하는 것이 가능하며, 동적 적응 메쉬세분화기법을 사용하여 흐름이 빠르게 변하는 영역에서 정확도를 유지하면서도 효율적으로 계산하는 것이 가능하다. HLLC 리만근사해법과 MUSCL 기법을 적용하여 시공간상에서 2차정도를 유지하며, 댐붕괴파와 같은 불연속적인 흐름을 정확하게 모의할 수 있다. 모형의 검증을 위해 IMPACT 프로젝트에서 수행한 도시지역 극한홍수실험을 모의하였다. 실험결과와 모의결과가 양호하게 일치하는 것을 확인하였으며, 천이류 현상과 함께 구조물에 의한 홍수파 전달 양상이 의미있는 수준으로 모의된 것을 확인하였다. 또한 분할격자기법의 사용으로 모델의 격자 민감도가 향상되었다. 본 모델은 댐붕괴와 같이 내수침수현상이 지배적이지 않은 도시범람을 모의하는데 활용할 수 있을 것으로 기대된다.

• 한국터널지하공간학회 논문집
• /
• 제20권1호
• /
• pp.183-195
• /
• 2018

최근 공동구 및 지하터널의 수요증가와 함께 수직구 굴착에 대한 연구의 필요성이 증가하고 있다. 공동구 연구단은 국토교통부 연구개발사업의 일환으로 '수직구 외주면 선행 굴착공법 및 장비'를 개발하였으며 현재 성능 검증 중에 있다. '수직구 외주면 선행 굴착공법'은 수직구 굴착 시 굴착면의 외주면을 먼저 굴착하고 굴착기 벽체를 관입시켜 연약지반의 히빙에 대한 지반의 안정성을 확보하는 공법이다. 이 연구에서는 원심모형실험을 통해 히빙을 모사하고 관내토의 유무에 따른 지반면의 히빙과 지반침하, 그리고 주변지반의 거동을 비교, 분석하였다. 분석 결과 관내토가 지반침하와 히빙의 발생을 충분히 억제하는 효과를 나타내는 것으로 파악되었으며, 수직구 외주면 선행 굴착공법이 히빙에 대한 지반의 안정성을 충분히 확보함을 확인할 수 있었다.

• 대한안전경영과학회지
• /
• 제10권4호
• /
• pp.241-245
• /
• 2008

Every single company in the world makes a huge amount of effort so as to not only cut down the physical distribution cost but promote the efficiency. In the government's respect, especially, they expect to maximize the synergy by unifying the physical distribution. For that reason, it relevant for all kinds of a distribution strategy to get rid of unnecessary distribution centers and to integrate distribution centers by unifying and rearranging the distribution centers that are hardly efficient. Most enterprises in Japan, related to making and distributive, have got a tendency to decentralize their distribution centers in a wide scope of the whole nation. In the meantime, they seem to get a move to become a great-sphere distribution center. Many similar cases in Korea, Koon-Po distribution center, Yong-In distribution center, are not expected to function properly. With a rate of trading products expanded, a new strategic physical distribution is needed to turn the way of depending on building up a new distribution center into the way of unifying and rearranging a distribution center. Therefore, this study aims to identify the optimal method of unifying and rearranging a distribution center, compared to the cost which takes place in a large number of distribution centers.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.459-467
• /
• 2016

최근, 도로를 따라 지하 5~7m의 저심도에 설치되는 저심도 도시철도시스템의 경제성을 확보하기 위해, 신개념의 모듈식 개착 시공법을 개발 중에 있다. 본 연구에서는 상부 슬래브간의 연결부에 대한 구조성능 검증을 위해 루프이음을 가진 프리캐스트 철근콘크리트 부재들의 4점 재하 실험을 수행하였다. 전체 11개의 실험체가 제작되었으며 단면형상, 이음부 형상, 이음길이, 횡방향 보강철근을 변수로 이음이 없는 전단면 및 반단면 실험체와 비교하였다. 실험결과, 루프이음 실험체는 항복하중과 최대하중시 변위량 차이가 컸으며 이는 항복이후 접합부에서 발생한 균열이 확장됨에 따라 강성저하로 변위량이 급격히 증가한 것으로 판단된다. 또한 200mm의 루프이음을 가진 반단면 실험체의 경우, 이음이 없는 기준 실험체에 상당하는 휨성능을 확보하며 200mm 초과시 휨성능 향상의 정체기를 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.309-312
• /
• 2002

For the purpose of more effective simulation of the utility interactive WPGS(Wind Power Generation System) the SWRW (Simulation method for WPGS using Real Weather condition) is used in this paper, in which those of three topics for the WPGS simulation. user-friendly method, applicability to grid-connection and the utilization of the real weather conditions, are satisfied. The simulation of the WPGS using the real weather condition including components modeling of wind turbine system is achieved by introducing the interface method of a non-linear external parameter and FORTRAN using PSCAD/EMTDC. The simulations of steady-state and transient-state are performed effectively by the introduced simulation method. The generator output and current supplied into utility can be obtained by the steady-state simulation, and THD can be achieved by analyzing the results as well. The transient - state of the WPGS can be analyzed by the simulation results of over cut-out wind speed.

• 대한물리치료과학회지
• /
• 제7권2호
• /
• pp.439-457
• /
• 2000

The causes, risk factors and sequelae of mastectomy were studied, and the physical therapy approaches on post-mastectomy was discussed in this study. It was found that the patients taken mastectomy have experienced pins and needles in muscle, weakening of muscle, pains, deterioration of motion in joint region and activities of daily living, psychiatric sequelae, and etc even after the conservertive therapies like the chemical therapy, radiotherapy, immunotherapy, and hormone therapy. However, few study on the physical therapy approaches for patients with breast cancer has been carried in Korea at present. The followings were proposed as the physical therapy approaches. 1. Shoulder joint motion approach to relax the limit of range of motion 2. Control of breathing exercise for dealing with removal of the pectorailis muscle 3. Method to reduce the edema of arms for tackling the cut of lymph node 4. Method to reduce pains, pins and needles 5. Support home exercise program after discharging from hospital, sexual life and pregnancy, and activities of daily living training method.

• 패션비즈니스
• /
• 제12권4호
• /
• pp.28-45
• /
• 2008

The purpose of this study is to diagnose actual condition of preference of hair-styling, hair-styling techniques, management, grasping a consumer's consciousness, etc with women living in a city. The survey was gotten to a feminine customer who visited the ten of beauty-shops in shopping center. And statistical data about the actual condition of hair-styling preference realities, hair-styling method and style management was entered into the SPSS statistics analysis system. In brief, be as follows by the results of study. There showed significant difference that noted in hair-style information and basis alternative a beauty salon, there were able to know people whose age is from 20's to 40's got mainly an influence of public media very much and from 40's to 50's got mainly an influence of people around them. Basis alternative of a beauty salon showed significant difference to follow age categories. It appeared that introducing from people around them have a effect on the 20's and 30's, and 40's got an influence of convenience of traffic, and 50's got mainly the shortest distance. In an attitude toward a hair style, especially toward hair cut, a case to do hair cut was most a lot of in own selections, and its result was independent of age categories. The reason that wants to give a chance was most a lot of thinking without an age. Preference length of hair cut showed a significant difference according to age. In permanent section, own selections appeared most regardless of age. And in the permanent motive, also, to have a change appeared most regardless of age. And people had a preference natural to role up to setting regardless of age in permanent wave. In hair color section, women whose age is 20's, 30's, 40's had a motive for a change, on the other hand, 50's and their senior had a motive for a gray hair. Women of all over the age almost knew a fashion color, and they had a preference brown color. In a preference way along a hair color kind, there was a significant difference according to age, also. 20's and 30's did mainly 'semi-permanent coating' and 40's and 50's did mainly 'permanent hair color'. In a attitude about a hair-style management, the more age is young, the more a period is long term. And the more age is old, the more the outlay for price of cut is expensive. But, on the contrary, permanent price showed that the more age is young, the more the outlay for price of permanent is expensive. In hair color, the more age is old, the more a period is short and the more price is low.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.655-656
• /
• 2005

In the future, plastic based system will play a crucial role in modem life, for examples, transparent display or disposable electronics and so on. In this paper, we introduced a new method to fabricate the metal line on the plastic substrate. Metal lines were fabricated by hot embossing and CMP process on PMMA (polymethylmethacrylate) substrates. A Si mold was made by wet etching process and a PMMA wafer was cut off from I mm thick PMMA sheet. A 100 nm thick Al was deposited on PMMA wafers. The Al deposited PMMA wafer and the Si mold carefully sandwiched which was directly imprinted by hot embossing. After imprinting process, a residual Al layer was removed by CMP process. Finally, we found the entire process may be very useful to fabricate the metal line on plastic substrates.