• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.29-34
• /
• 2012

This paper reports some experimental results in high speed rigid tapping of magnesium alloy(AZ91D). M3 spiral tap and high speed spindle tapping center of gantry type were used in experiments and thrust forces were measured. The experimental results indicate that the thrust forces are proportional to the spindle speed and depth of cut. The thrust forces increase as the depth of cut increases. M3 Tapping was achieved at the spindle speed of 10,000rpm, depth of cut of 1.5D and total stroke of 32mm.

• 한국공작기계학회논문집
• /
• 제12권6호
• /
• pp.36-43
• /
• 2003

In machining of ceramic materials, they are very difficult-to cut materials because of there high strength and hardness. Machining of ceramics are characterized by cracking and brittle fracture. Generally, ceramics are machined using conventional method such as finding and polishing. However these processes are generally costly and have low MRR(material removal rate). This paper focuses on determining the optimal levels of process parameters for products with CNC machining center. For this purpose, the optimization of cutting parameters is performed based on experimental design method. A design and analysis of experiments is conducted to study the effects of these parameters on the surface roughness by using the S/N ratio, analysis of ANOVA and F-test. Cutting parameters, namely, cutting speed, feed and depth of cut are optimized with consideration of the surface roughness.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.135-138
• /
• 2009

In this study we investigate the machining characteristics of tool material for cold forging by using the machining center. The test was in the SKD62 cold forging material by 2-edge endmill with cutting fluid. The coating conditions are depth of cut 1,2,3mm. WC-endmill, federate 20mm/min, cutting velocity 20m/min. The surface roughness increase as the depth of cut increase. Also cutting force increase whiles the depth of cut increase.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.61-68
• /
• 1998

The form accuracy of parts has become an important parameter. Therefore, dimensional tolerance and geometric tolerance are used in the design stage to satisfy required quality and functions of parts. But the informations on the machining conditions, which can satisfy the assigned geometric tolerance in design, are insufficient. The objectives of this research are to study the effects of the grinding parameters such as traverse speed, work speed, depth of cut, and dwell time on the after-ground workpiece shape, and to find out the major parameters among them. The results are as follows, The effects of work speed and depth of cut on workpiece shape are negligible compared with the effect of traverse speed. There is an optimal dwell time depending on the traverse speed. The optimal dwell time is decreasing as the traverse speed is increased.

• 한국육종학회지
• /
• 제41권4호
• /
• pp.539-542
• /
• 2009

A new gerbera variety "Pink Swan" was released by the National Horticultural Research Institute (NHRI) in 2007. A cross was made between "Royal" with orange and single and 'Himalaya' with white and semi-double in 2004. After investigation of the characteristics for 4 years (from 2004 to 2007), it was selected specially for the use of cut-flower. "Pink Swan" is a vigorous medium-sized cultivar with pink (RHS R48D), yellow green center and semi-double. The average flower diameter is 10.6 cm. And inner ray floret and disc diameter is 5.99cm and 1.83cm, respectively. It produces a large yield with continuous supply of flowers and has adequate peduncle height. We believe that "Pink Swan" has a great potential for expanding cultivated area of domestic gerbera cultivar and increasing farmers-income.

• 한국육종학회지
• /
• 제40권4호
• /
• pp.499-502
• /
• 2008

A new gerbera variety 'Yellow Wing' was released by the National Horticultural Research Institute (NHRI) in 2007. A cross was made between 'Gold Finger' with yellow and single and 'Yellow Springs' with yellow and spider in 2004. After investigation of the characteristics for 4 years (from 2004 to 2007), it was selected specially for the use of cut-flower. 'Yellow Wing' is a vigorous cultivar with yellow (RHS YO14B), green center and spider type. The flower diameter is 10.6cm. And inner ray floret and disc diameter is 2.83cm and 2.03cm, respectively. It produces a large yield with continuous supply of flowers and has adequate peduncle height and brilliant color. We believe that 'Yellow Wing' has a great potential for expanding cultivated area of domestic gerbera cultivar and increasing farmers-income.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.221-223
• /
• 1991

In order to evaluate degradation of the aged power cables, thin slices(200m) cut from the aged cables were prepared for thermally stimulated current measurements. Throughout the temperature range, 140 to $280^{\circ}C$ the TSC is greater for the aged material, and sharp peak is observed at $158^{\circ}C$ and $210^{\circ}C$.

• 한국항해항만학회지
• /
• 제35권10호
• /
• pp.847-853
• /
• 2011

본 연구는 수입된 목재를 가공하여 내수로 전환하는 활동뿐만 아니라 인천항에서의 부가가치 활동을 통해 완제품, 반제품의 형태로 타국가로의 재수출이 가능한 비즈니스 모델을 제안하고자 하였다. 구체적으로 부가가치를 창출하기 위한 세부방안을 살펴보면 인천북항을 활용하는 수입다변화 모델, 통합가공센터 팰릿시설 조성 모델, 목재 공동물류센터 모델, 수출형 Pre-Cut 자재개발모델 그리고 수출가공형 부가가치 창출모델을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.579-582
• /
• 1989

The air-cooled waterwheel generator has a fan connected to waterwheel shaft or motor driven fan or fans. The fans are operated at constant speed, constant input, regardless of generator loss which is varied according to generator output and coolant the perature. Energy savings may he possible if the cooling air flow is controlled according to generato output and air temperature depending on season. The simulation and experience have been done on the 22.6 KVA Waterwheel generator by using AC variable speed drive. The results gave us los cut of generator.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1332-1338
• /
• 2003

To estimate the true wear rate of polyethylene acetabular cups used in total hip arthroplasty, the dynamic compressive creep deformation of ultra-high molecular weight polyethylene (UHMWPE) was quantified as a function of time, load amplitude, and radial location of the specimen in the extruded rod stock. These data were also compared with the creep behavior of polyethylene observed under static loading. Total creep strains under dynamic loading were only 64％, 70％, and 61％ of the total creep strains under static loading at the same maximum pressures of 2 MPa,4 MPa, and 8 MPa, respectively. Specimens cut from the periphery of the rod stock demonstrated more creep than those cut from the center when they were compressed in a direction parallel to the extrusion direction (vertical loading) whereas the opposite was observed when specimens were compressed in a direction perpendicular to the extrusion direction (transverse loading). These findings show that creep deformation of UHMWPE depends upon the orientation of the crystalline lamellae.