• 천문학회지
• /
• 제53권6호
• /
• pp.161-168
• /
• 2020

We report the discovery of a giant exoplanet in the microlensing event OGLE-2017-BLG-1049, with a planet-host star mass ratio of q = 9.53 ± 0.39 × 10-3 and a caustic crossing feature in Korea Microlensing Telescope Network (KMTNet) observations. The caustic crossing feature yields an angular Einstein radius of θE = 0.52 ± 0.11 mas. However, the microlens parallax is not measured because the time scale of the event, tE ≃ 29 days, is too short. Thus, we perform a Bayesian analysis to estimate physical quantities of the lens system. We find that the lens system has a star with mass Mh = 0.55+0.36-0.29 M⊙ hosting a giant planet with Mp = 5.53+3.62-2.87 MJup, at a distance of DL = 5.67+1.11-1.52 kpc. The projected star-planet separation is a⊥ = 3.92+1.10-1.32 au. This means that the planet is located beyond the snow line of the host. The relative lens-source proper motion is μrel ~ 7 mas yr-1, thus the lens and source will be separated from each other within 10 years. After this, it will be possible to measure the flux of the host star with 30 meter class telescopes and to determine its mass.

• Kidney Research and Clinical Practice
• /
• 제37권4호
• /
• pp.404-413
• /
• 2018

Background: Dynapenic obesity and sarcopenic obesity increase cardiovascular disease (CVD) and mortality in nonuremic patients. The present study was designed to determine the prevalence of dynapenic obesity and sarcopenic obesity and their associations with CVD risk factors in peritoneal dialysis (PD) patients. Methods: All eligible PD patients in Tehran peritoneal dialysis centers were included in this cross-sectional study. Skeletal muscle mass and fat mass were assessed using bioelectrical impedance analysis. Muscle strength and physical performance were determined using hand grip strength and a 4-meter walk gait speed test, respectively. In addition, a 5-mL blood sample was obtained from each patient. Results: The prevalence of dynapenic obesity and sarcopenic obesity were 11.4% and 3.8% in PD patients, respectively. Serum high-sensitive C-reactive protein (hs-CRP), soluble intercellular adhesion molecule type 1, triglyceride, total cholesterol, and low-density lipoprotein cholesterol were significantly higher in PD patients with dynapenic obesity than in dynapenic nonobese and nondynapenic nonobese patients. Similarly, serum concentrations of CVD risk factors in PD patients with sarcopenic obesity were higher than in nonsarcopenic nonobese patients, but these differences were statistically significant only for serum hs-CRP and triglyceride. In addition, muscle strength and skeletal muscle mass percentage were negatively associated with markers of inflammation and dyslipidemia, whereas body fat percentage was positively associated with these CVD risk factors. Conclusion: This study indicates that although the prevalence of dynapenic obesity and sarcopenic obesity are relatively low in PD patients, these disorders may be associated with CVD risk factors.

• 한국주조공학회지
• /
• 제31권5호
• /
• pp.274-283
• /
• 2011

The vacuum die casting is a promising candidate of the stamping process for fabrication of fuel cell bipolar plate due to its advantages, such as precision casting, mass production and short production time. This study proposes vacuum die casting process to fabricate bipolar plates in fuel cell. Bipolar plates were fabricated under various injection conditions such as molten metal temperature and injection velocity. Also, according to injection velocity conditions, simulation results of MAGMA soft were compared to the experimental results. In case of melt temperature $650^{\circ}C$, misrun occurred. When the melt temperature was $730^{\circ}C$, mechanical properties were low due to dendrite microstructure. Injection velocity has to set at more than 2.0 m/s to fabricate the sound sample. When melt temperature, injection velocity (Fast shot), and vacuum pressure are $700^{\circ}C$, 2.5 m/s and 30 kPa respectively, sample had good formability and few casting defects. Simulation results are mostly in agreement with experimental results.

• 공업화학
• /
• 제26권6호
• /
• pp.730-736
• /
• 2015

Cyclotrimethylene trinitramine (RDX)은 대표적인 니트라민 계열 고폭 화약으로 충격, 마찰, 열, 정전기 등 비의도적인 자극에 대한 둔감화를 위해 서브마이크론 크기 RDX 입자 제조가 요구되고 있다. 본 연구에서는 drowning-out 결정화에 의한 서브마이크론 RDX 입자 제조 조건을 최적화하기 위하여 RDX 농도, 반용매 온도, 반용매 질량을 독립변수로 설정하였으며 반응 표면 분석법의 일종인 중심합성회전설계에 의한 실험 계획이 수립되었다. 도출된 회귀 모델의 수정 결정계수(adjusted determination coefficient, adj. $R^2$)는 0.9984이며 p 값은 0.01 이하로 유의했다. 회귀 분석에 의해 독립 변수간 자기상관성은 없으며 교호작용 효과가 확인되었다. 중심합성회전설계에 의한 최적화로부터 도출된 최소 평균 입경의 RDX 입자 제조 조건은 RDX 농도 3 wt%, 반용매 온도 $0.2^{\circ}C$, 반용매 질량 266 g이었다. 회귀 모델에서 예측된 RDX 입자의 평균 입경은 $0.53{\mu}m$이며 실제 제조된 RDX 입자의 평균 입경도 $0.53{\mu}m$이었다. X선 회절 분석과 FT-IR 분석으로부터 RDX 입자의 결정형은 ${\alpha}$형이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.170-170
• /
• 2000

Synthetic polymers such as polyimide, polycarbonate, and poly(methyl methacrylate) are long chain molecules which consist of carbon, hydrogen, and heteroatom linked together chemically. Recently, polymer surface can be modified by using a high energy ion beam process. High energy ions are introduced into polymer structure with high velocity and provide a high degree of chemical bonding between molecular chains. In high energy beam process the modified polymers have the highly crosslinked three-dimensionally connected rigid network structure and they showed significant improvements in electrical conductivity, in hardness and in resistance to wear and chemicals. Polyimide films (Kapton, types HN) with thickness of 50~100${\mu}{\textrm}{m}$ were used for investigations. They were treated with two different surface modification techniques: Plasma Source Ion Implantation (PSII) and conventional Ion Implantation. Polyimide films were implanted with different ion species such as Ar+, N+, C+, He+, and O+ with dose from 1 x 1015 to 1 x 1017 ions/cm2. Ion energy was varied from 10keV to 60keV for PSII experiment. Polyimide samples were also implanted with 1 MeV hydrogen, oxygen, nitrogen ions with a dose of 1x1015ions/cm2. This work provides the possibility for inducing conductivity in polyimide films by ion beam bombardment in the keloelectronvolt to megaelectronvolt energy range. The electrical properties of implanted polyimide were determined by four-point probe measurement. Depending on ion energy, doses, and ion type, the surface resistivity of the film is reduced by several orders of magnitude. Ion bombarded layers were characterized by Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS), XPS, and SEM.

• 한국분말재료학회지
• /
• 제19권3호
• /
• pp.210-214
• /
• 2012

Mass production-capable $Li_2MnSiO_4$ powder was synthesized for use as cathode material in state-of-the-art lithium-ion batteries. These batteries are main powder sources for high tech-end digital electronic equipments and electric vehicles in the near future and they must possess high specific capacity and durable charge-discharge characteristics. Amorphous silicone was quite superior to crystalline one as starting material to fabricate silicone oxide with high reactivity between precursors of sol-gel type reaction intermediates. The amorphous silicone starting material also has beneficial effect of efficiently controlling secondary phases, most notably $Li_xSiO_x$. Lastly, carbon was coated on $Li_2MnSiO_4$ powders by using sucrose to afford some improved electrical conductivity. The carbon-coated $Li_2MnSiO_4$ cathode material was further characterized using SEM, XRD, and galvanostatic charge/discharge test method for morphological and electrochemical examinations. Coin cell was subject to 1.5-4.8 V at C/20, where 74 mAh/g was observed during primary discharge cycle.

• Neonatal Medicine
• /
• 제17권2호
• /
• pp.250-253
• /
• 2010

Citrullinemia는 요소 회로 이상으로 argininosuccinate synthetase의 결핍으로 기인한다. 저자들은 citrullinemia type I 환자와 그의 가족에서 새롭게 발견된 돌연변이를 경험하여 이를 보고하고자 한다. 환아는 광범위 신생아 선천성 대사이상 선별검사에서 citrulline이 고도의 증가 소견과 혈청 암모니아는 $982{\mu}mol/L$까지 증가 소견을 보였다. 혈청 아미노산 분석결과 citrulline 1,581 nmol/mL로 현저한 증가 소견을 보였으며 또한 소변 유기산 분석 검사결과 orotic acid가 3,566 mmol/mol Cr로 매우 증가된 소견을 보였다. Citrullinemia 확진을 위하여 환아와 가족에 대하여 ASS1 gene 검사를 시행하였다. 환아는 c.689G>C (p.G230A)와 c.892G>A (p.E298k)의 변이가 발견되어 ASS1 gene의 돌연변이에 의한 citrullinemia type I 으로 진단되었으며, 두 가지 돌연변이는 아직 국내에 보고된 적 없는 새로운 것으로 확인되었다. 국내에서 새롭게 발견된 citrullinemia type I 유전자를 보고하며 citrullinemia를 보인 경우 확진 및 유전상담을 위하여 가족 유전자 검사를 시행하는 것이 필요하다고 생각한다.

• Asian Journal of Atmospheric Environment
• /
• 제9권1호
• /
• pp.66-77
• /
• 2015

In order to survey the seasonal variation of the chemical composition of particulate matter of $2.5{\mu}m$ or less ($PM_{2.5}$), $PM_{2.5}$ was sampled from 8 February 2013 to 31 March 2014 in an industrial area of Chiba Prefecture, Japan. Chemical measurements of the sample included: ionic components ($Na^+$, $NH_4{^+}$, $Ca^{2+}$, $Mg^{2+}$, $K^+$, $Cl^-$, $NO_3{^-}$ and $SO_4{^{2-}}$), carbonaceous components - organic carbon (OC) and elemental carbon (EC), and water-soluble organic carbon (WSOC). Also, secondary organic carbon (SOC) was measured based using the EC tracer method, and char-EC and soot-EC were calculated from the analytical results. The data obtained were interpreted in terms of temporal variation. Of the overall mean value of $PM_{2.5}$ mass concentration obtained during the study period, ionic components, OC and EC accounted for 45.3%, 19.7%, and 8.0%, respectively. $NO_3{^-}$ showed a unique seasonal distribution pattern due to a dependence on temperature and absolute humidity. It was estimated that an approximate temperature of $14^{\circ}C$, and absolute humidity of $7g/m^3$ were critical for the reversible reaction of $NH_4NO_3(p){\leftrightharpoons}NH_3(g)+HNO_3(g)$. The amount of OC and EC contributing to the monthly $PM_{2.5}$ mass concentration was higher in autumn and winter compared to spring and summer. This result could be attributed to the impact of burning biomass, since WSOC and the ratio of char-EC/soot-EC showed a similar pattern during the corresponding period. From the comparison of monthly WSOC/OC values, a maximum ratio of 83% was obtained in August (summer). The WSOC and estimated SOC levels derived from the EC tracer method correlated (R=0.77) in summer. The high occurrence of WSOC during summer was mainly due to the formation of SOC by photochemical reactions. Through long-term observation of $PM_{2.5}$ chemical components, we established that the degree to which the above-mentioned factors influence $PM_{2.5}$ composition, fluctuates with seasonal changes.

• 한국해양바이오학회지
• /
• 제15권2호
• /
• pp.82-89
• /
• 2023

Microalgae, as photosynthetic organisms, possess the ability to produce a diverse array of bioactive compounds. This study focused on the transformant Chlamydomonas reinhardtii dZL and subjected it to cultivation under varying light intensities (60, 120, 180, and 240 µmol/m²/s). Our aim was to assess the impact of light intensity on both microalgal biomass and carotenoid production. The cultivation took place in 80 mL bubble column photobioreactors, specifically the Multi-cultivator. Notably, the culture exposed to 240 µmol/m²/s exhibited the most rapid cell growth, surpassing even the cell concentration achieved at 180 µmol/m²/s by day 8. A detailed analysis of the specific irradiance rate over time unequivocally revealed a sharp decline in growth rates when the rate fell below 2 × 10^-10 µmol/cell/s. Although the culture with 60 µmol/m²/s yielded the highest carotenoid content (1.2% of dry weight), the culture exposed to 240 µmol/m²/s recorded the highest carotenoid concentration at 8.9 mg/L owing to its higher biomass. Our findings reveal the critical importance of maintaining a specific irradiance rate above 2 × 10^-10 µmol/cell/s to enhance biomass and carotenoid productivity. This study lays the groundwork for defining optimal light intensity conditions applicable to mass culture systems, with the objective of augmenting C. reinhardtii biomass and optimizing carotenoid productivity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.204-204
• /
• 1999

The plasma source ion implantation(PSII) technique which is a method using high negative voltage pulse in plasma system has the potential to change the surface properties of polymer. PSII technique increase the surface free energy by introducing polar functional groups on the surface so that it improves reactivity, hydrophilicity, adhension, biocompatability, etc. However, the mobility of polymer chains enables the modified surface layers to adapt their composition to interfacial force. This hydrophobic recovery interrupts the stability of modified surfaces to keep for the long time. In this study, poly(methyl methacrylate)(PMMA), poly(2-hydroxyethyl methacrylate)(PHEMA), and polu(2-hydroxypropyl methacylate)(PHPMA) for contact lens application, were modified to improve the wettability with PSII technique and were investigated the surface stabilities. Polymer film was prepared with solution casting(3 wt.% solution) and was annealed at 11$0^{\circ}C$ under vacuum oven to remove solvent completely and to eliminate physical ageing. The thickness of the film measured by scanning electron microscopy (SEM) and surface profilometer was about 10${\mu}{\textrm}{m}$. Polymers were treated with different kinds of gases, pulse frequency, pulse with, pulse voltage, and treatment time. Even though PMMA, PHEMA, and PHPMA have similar repeat unit structure, the optimal treatment conditions and the tendency to hydrophobic recovery were different. PHPMA, more hydrophilic polymer than PMMA and PHEMA showd better wettability and stability after mild treatment. Surface tensions were obtained by water and diiodomethane contact angle measurements to monitor the relation between hydrophobic recovery and polymer structure. Different ion species in plasma change the polar component and dispersion component of polymer surface. For better wettability surface, the increase of polar component was a dominant factor. We also characterized modified polymer surfaces using x-ray photoelectron spectroscopy(XPS), secondary ion mass spectrometry(SIMS), Fourier Transform infrared spectroscopy(FT-IR), and SEM.