• Journal of The Korean Astronomical Society
• /
• v.53 no.6
• /
• pp.161-168
• /
• 2020

We report the discovery of a giant exoplanet in the microlensing event OGLE-2017-BLG-1049, with a planet-host star mass ratio of q = 9.53 ± 0.39 × 10-3 and a caustic crossing feature in Korea Microlensing Telescope Network (KMTNet) observations. The caustic crossing feature yields an angular Einstein radius of θE = 0.52 ± 0.11 mas. However, the microlens parallax is not measured because the time scale of the event, tE ≃ 29 days, is too short. Thus, we perform a Bayesian analysis to estimate physical quantities of the lens system. We find that the lens system has a star with mass Mh = 0.55+0.36-0.29 M⊙ hosting a giant planet with Mp = 5.53+3.62-2.87 MJup, at a distance of DL = 5.67+1.11-1.52 kpc. The projected star-planet separation is a⊥ = 3.92+1.10-1.32 au. This means that the planet is located beyond the snow line of the host. The relative lens-source proper motion is μrel ~ 7 mas yr-1, thus the lens and source will be separated from each other within 10 years. After this, it will be possible to measure the flux of the host star with 30 meter class telescopes and to determine its mass.

• Kidney Research and Clinical Practice
• /
• v.37 no.4
• /
• pp.404-413
• /
• 2018

Background: Dynapenic obesity and sarcopenic obesity increase cardiovascular disease (CVD) and mortality in nonuremic patients. The present study was designed to determine the prevalence of dynapenic obesity and sarcopenic obesity and their associations with CVD risk factors in peritoneal dialysis (PD) patients. Methods: All eligible PD patients in Tehran peritoneal dialysis centers were included in this cross-sectional study. Skeletal muscle mass and fat mass were assessed using bioelectrical impedance analysis. Muscle strength and physical performance were determined using hand grip strength and a 4-meter walk gait speed test, respectively. In addition, a 5-mL blood sample was obtained from each patient. Results: The prevalence of dynapenic obesity and sarcopenic obesity were 11.4% and 3.8% in PD patients, respectively. Serum high-sensitive C-reactive protein (hs-CRP), soluble intercellular adhesion molecule type 1, triglyceride, total cholesterol, and low-density lipoprotein cholesterol were significantly higher in PD patients with dynapenic obesity than in dynapenic nonobese and nondynapenic nonobese patients. Similarly, serum concentrations of CVD risk factors in PD patients with sarcopenic obesity were higher than in nonsarcopenic nonobese patients, but these differences were statistically significant only for serum hs-CRP and triglyceride. In addition, muscle strength and skeletal muscle mass percentage were negatively associated with markers of inflammation and dyslipidemia, whereas body fat percentage was positively associated with these CVD risk factors. Conclusion: This study indicates that although the prevalence of dynapenic obesity and sarcopenic obesity are relatively low in PD patients, these disorders may be associated with CVD risk factors.

• Journal of Korea Foundry Society
• /
• v.31 no.5
• /
• pp.274-283
• /
• 2011

The vacuum die casting is a promising candidate of the stamping process for fabrication of fuel cell bipolar plate due to its advantages, such as precision casting, mass production and short production time. This study proposes vacuum die casting process to fabricate bipolar plates in fuel cell. Bipolar plates were fabricated under various injection conditions such as molten metal temperature and injection velocity. Also, according to injection velocity conditions, simulation results of MAGMA soft were compared to the experimental results. In case of melt temperature $650^{\circ}C$, misrun occurred. When the melt temperature was $730^{\circ}C$, mechanical properties were low due to dendrite microstructure. Injection velocity has to set at more than 2.0 m/s to fabricate the sound sample. When melt temperature, injection velocity (Fast shot), and vacuum pressure are $700^{\circ}C$, 2.5 m/s and 30 kPa respectively, sample had good formability and few casting defects. Simulation results are mostly in agreement with experimental results.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.730-736
• /
• 2015

Cyclotrimethylene trinitramine (RDX) is a high explosive commonly used for military applications. Submicronization of RDX particles has been a critical issue in order to alleviate the unintended and accidental stimuli toward safer and more powerful performances. The purpose of this study is to optimize experimental variables for drowning-out crystallization applied to produce submicron RDX particles. Effects of RDX concentration, anti-solvent temperature and anti-solvent mass were analyzed by the central composite rotatable design. The adjusted determination coefficient of regression model was calculated to be 0.9984 having the p-value less than 0.01. Response surface plots based on the central composite rotatable design determined the optimum conditions such as RDX concentration of 3 wt%, anti-solvent temperature of $0.2^{\circ}C$ and anti-solvent mass of 266 g. The optimum and experimental diameters of RDX particles were measured to be $0.53{\mu}m$ and $0.53{\mu}m$, respectively. The regression model satisfactorily predicts the average diameter of RDX particles prepared by drowning-out crystallization. Structure of RDX crystals was found to be ${\alpha}$-form by X-ray diffraction analysis and FT-IR spectroscopy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.170-170
• /
• 2000

Synthetic polymers such as polyimide, polycarbonate, and poly(methyl methacrylate) are long chain molecules which consist of carbon, hydrogen, and heteroatom linked together chemically. Recently, polymer surface can be modified by using a high energy ion beam process. High energy ions are introduced into polymer structure with high velocity and provide a high degree of chemical bonding between molecular chains. In high energy beam process the modified polymers have the highly crosslinked three-dimensionally connected rigid network structure and they showed significant improvements in electrical conductivity, in hardness and in resistance to wear and chemicals. Polyimide films (Kapton, types HN) with thickness of 50~100${\mu}{\textrm}{m}$ were used for investigations. They were treated with two different surface modification techniques: Plasma Source Ion Implantation (PSII) and conventional Ion Implantation. Polyimide films were implanted with different ion species such as Ar+, N+, C+, He+, and O+ with dose from 1 x 1015 to 1 x 1017 ions/cm2. Ion energy was varied from 10keV to 60keV for PSII experiment. Polyimide samples were also implanted with 1 MeV hydrogen, oxygen, nitrogen ions with a dose of 1x1015ions/cm2. This work provides the possibility for inducing conductivity in polyimide films by ion beam bombardment in the keloelectronvolt to megaelectronvolt energy range. The electrical properties of implanted polyimide were determined by four-point probe measurement. Depending on ion energy, doses, and ion type, the surface resistivity of the film is reduced by several orders of magnitude. Ion bombarded layers were characterized by Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS), XPS, and SEM.

• Journal of Powder Materials
• /
• v.19 no.3
• /
• pp.210-214
• /
• 2012

Mass production-capable $Li_2MnSiO_4$ powder was synthesized for use as cathode material in state-of-the-art lithium-ion batteries. These batteries are main powder sources for high tech-end digital electronic equipments and electric vehicles in the near future and they must possess high specific capacity and durable charge-discharge characteristics. Amorphous silicone was quite superior to crystalline one as starting material to fabricate silicone oxide with high reactivity between precursors of sol-gel type reaction intermediates. The amorphous silicone starting material also has beneficial effect of efficiently controlling secondary phases, most notably $Li_xSiO_x$. Lastly, carbon was coated on $Li_2MnSiO_4$ powders by using sucrose to afford some improved electrical conductivity. The carbon-coated $Li_2MnSiO_4$ cathode material was further characterized using SEM, XRD, and galvanostatic charge/discharge test method for morphological and electrochemical examinations. Coin cell was subject to 1.5-4.8 V at C/20, where 74 mAh/g was observed during primary discharge cycle.

• Neonatal Medicine
• /
• v.17 no.2
• /
• pp.250-253
• /
• 2010

Citrullinemia type I is an urea cycle defect caused by mutations in the argininosuccinate synthetase (ASS1) gene. We report a novel argininosuccinate synthetase gene mutation in a Korean family with type I citrullinemia. Metabolic evaluation revealed significant hyperammonemia. Amino acid/acylcarnitine screening using tandem mass spectrometry showed high level of citrulline. Plasma amino acid analysis showed high level of citrulline and the urine organic acid analysis showed makedly increased level of orotic acid. To confirm diagnosis of citrullinemia we did mutation analysis of the ASS1 gene. The patient was found to have mutations of c.689G>C (p.G230A) and c.892G>A (p.E298K), which were new types of argininosuccinate synthetase gene mutation have never been reported in Korea. We report a novel case of argininosuccinate synthetase 1 gene mutation and suggest that the gene study to the family members is necessary to carry out when a patient is diagnosed as citrullinemia.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.1
• /
• pp.66-77
• /
• 2015

In order to survey the seasonal variation of the chemical composition of particulate matter of $2.5{\mu}m$ or less ($PM_{2.5}$), $PM_{2.5}$ was sampled from 8 February 2013 to 31 March 2014 in an industrial area of Chiba Prefecture, Japan. Chemical measurements of the sample included: ionic components ($Na^+$, $NH_4{^+}$, $Ca^{2+}$, $Mg^{2+}$, $K^+$, $Cl^-$, $NO_3{^-}$ and $SO_4{^{2-}}$), carbonaceous components - organic carbon (OC) and elemental carbon (EC), and water-soluble organic carbon (WSOC). Also, secondary organic carbon (SOC) was measured based using the EC tracer method, and char-EC and soot-EC were calculated from the analytical results. The data obtained were interpreted in terms of temporal variation. Of the overall mean value of $PM_{2.5}$ mass concentration obtained during the study period, ionic components, OC and EC accounted for 45.3%, 19.7%, and 8.0%, respectively. $NO_3{^-}$ showed a unique seasonal distribution pattern due to a dependence on temperature and absolute humidity. It was estimated that an approximate temperature of $14^{\circ}C$, and absolute humidity of $7g/m^3$ were critical for the reversible reaction of $NH_4NO_3(p){\leftrightharpoons}NH_3(g)+HNO_3(g)$. The amount of OC and EC contributing to the monthly $PM_{2.5}$ mass concentration was higher in autumn and winter compared to spring and summer. This result could be attributed to the impact of burning biomass, since WSOC and the ratio of char-EC/soot-EC showed a similar pattern during the corresponding period. From the comparison of monthly WSOC/OC values, a maximum ratio of 83% was obtained in August (summer). The WSOC and estimated SOC levels derived from the EC tracer method correlated (R=0.77) in summer. The high occurrence of WSOC during summer was mainly due to the formation of SOC by photochemical reactions. Through long-term observation of $PM_{2.5}$ chemical components, we established that the degree to which the above-mentioned factors influence $PM_{2.5}$ composition, fluctuates with seasonal changes.

• Journal of Marine Bioscience and Biotechnology
• /
• v.15 no.2
• /
• pp.82-89
• /
• 2023

Microalgae, as photosynthetic organisms, possess the ability to produce a diverse array of bioactive compounds. This study focused on the transformant Chlamydomonas reinhardtii dZL and subjected it to cultivation under varying light intensities (60, 120, 180, and 240 µmol/m²/s). Our aim was to assess the impact of light intensity on both microalgal biomass and carotenoid production. The cultivation took place in 80 mL bubble column photobioreactors, specifically the Multi-cultivator. Notably, the culture exposed to 240 µmol/m²/s exhibited the most rapid cell growth, surpassing even the cell concentration achieved at 180 µmol/m²/s by day 8. A detailed analysis of the specific irradiance rate over time unequivocally revealed a sharp decline in growth rates when the rate fell below 2 × 10^-10 µmol/cell/s. Although the culture with 60 µmol/m²/s yielded the highest carotenoid content (1.2% of dry weight), the culture exposed to 240 µmol/m²/s recorded the highest carotenoid concentration at 8.9 mg/L owing to its higher biomass. Our findings reveal the critical importance of maintaining a specific irradiance rate above 2 × 10^-10 µmol/cell/s to enhance biomass and carotenoid productivity. This study lays the groundwork for defining optimal light intensity conditions applicable to mass culture systems, with the objective of augmenting C. reinhardtii biomass and optimizing carotenoid productivity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.204-204
• /
• 1999

The plasma source ion implantation(PSII) technique which is a method using high negative voltage pulse in plasma system has the potential to change the surface properties of polymer. PSII technique increase the surface free energy by introducing polar functional groups on the surface so that it improves reactivity, hydrophilicity, adhension, biocompatability, etc. However, the mobility of polymer chains enables the modified surface layers to adapt their composition to interfacial force. This hydrophobic recovery interrupts the stability of modified surfaces to keep for the long time. In this study, poly(methyl methacrylate)(PMMA), poly(2-hydroxyethyl methacrylate)(PHEMA), and polu(2-hydroxypropyl methacylate)(PHPMA) for contact lens application, were modified to improve the wettability with PSII technique and were investigated the surface stabilities. Polymer film was prepared with solution casting(3 wt.% solution) and was annealed at 11$0^{\circ}C$ under vacuum oven to remove solvent completely and to eliminate physical ageing. The thickness of the film measured by scanning electron microscopy (SEM) and surface profilometer was about 10${\mu}{\textrm}{m}$. Polymers were treated with different kinds of gases, pulse frequency, pulse with, pulse voltage, and treatment time. Even though PMMA, PHEMA, and PHPMA have similar repeat unit structure, the optimal treatment conditions and the tendency to hydrophobic recovery were different. PHPMA, more hydrophilic polymer than PMMA and PHEMA showd better wettability and stability after mild treatment. Surface tensions were obtained by water and diiodomethane contact angle measurements to monitor the relation between hydrophobic recovery and polymer structure. Different ion species in plasma change the polar component and dispersion component of polymer surface. For better wettability surface, the increase of polar component was a dominant factor. We also characterized modified polymer surfaces using x-ray photoelectron spectroscopy(XPS), secondary ion mass spectrometry(SIMS), Fourier Transform infrared spectroscopy(FT-IR), and SEM.