• Journal of Power System Engineering
• /
• v.16 no.3
• /
• pp.29-36
• /
• 2012

The computational flow analysis using LES technique was introduced to investigate the flow field improvement of an indoor RAC chassis consisting of a rear-guider, a stabilizer and a cross-flow fan. This unsteady three-dimensional numerical analysis was carried out by the commercial SC/Tetra software. The edge blocks were adopted in this study as a tool for the flow field improvement of an indoor RAC. In view of the results so far achieved, the edge blocks cause the center of an eccentric vortex to be stable along all length of a cross-flow fan, and then, the static pressure and the velocity vector show a stable distributions. In consequence, because the edge blocks eliminate a reverse flow near the edges, an exhausting flow becomes to be stable and uniform.

• Explosives and Blasting
• /
• v.36 no.3
• /
• pp.29-38
• /
• 2018

With the recent industrial developments and economic development nationally, there has been a rapidly increasing demand for the use of underground space as locations for establishing social infrastructure and various convenience facilities. In this study, a mist-control system was developed to reduce the generation of dust in underground blasting. To enhance the dust-reduction effect, a guiding device was developed which is capable of adjusting the direction of the spray toward's the blasting face of mine or tunnel. A numerical analysis was performed by using the AUTODYN software, and results were compared with those published in basic experiments. To verify the mist-diffusion effect according to the position of explosives in a water bag, numerical analyses were conducted for the following cases: Explosives were set in the middle, and in the bottom of the water bag. The optimum condition was external detonation and center charge. The mist particle size from the result was suitable for the reduction of dust after blasting in underground mine and tunnel.

• Explosives and Blasting
• /
• v.34 no.3
• /
• pp.1-9
• /
• 2016

The shaped charge were made for identifying the effect of controled blasting using relatively low VOD explosive for cutting rock mass with changing quality and thickness of metal liner. The metal liner was attached on both sides of a charge for directional cutting, when the shaped charge exploded in rock mass. Also, a efficiency of shaped charge was identified by concrete member experiment. And a center guide used for maintaining stand-off between shaped charge and hole wall. A case of Fe liner of thickness 0.8mm formed the deepest notch of experiments and the directional cutting of concrete member was identified.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.440-443
• /
• 2005

The wide spread of internet business recently necessitates recommendation systems which can recommend the most suitable product fur customer demands. Currently the recommendation systems use content-based filtering and/or collaborative filtering methods, which are unable both to explain the reason for the recommendation and to reflect constantly changing requirements of the users. These methods guarantee good efficiency only if there is a lot of information about users. This paper proposes an algorithm called 'demand articulate & integration' which can perceive user's continuously varying intents and recommend proper contents. A method of knowledge classification which can be applicable to this algorithm is also developed in order to disassemble knowledge into basic units and articulate indices. The algorithm provides recommendation outputs that are close to expert's opinion through the tracing of articulate index. As a case study, a knowledge base for heritage information is constructed with the expert guide's knowledge. An intelligent recommendation system that can guide heritage tour as good as the expert guider is developed.