• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1681-1682
• /
• 2006

태양전지는 일사량에 따라 그 출력특성이 변화하기 때문에 태양전지로 부터 최대출력을 얻기 위해서는 컨버터에 의한 최대 전력점 추종 제어가 필요하다. 본 연구에서는 태양광 발전시스템의 최대전력추종을 위해 퍼지 이론을 도입한 퍼지제어기를 설계하였다. 그리고 퍼지제어기의 디지털 설계를 위해 태양광 발전시스템의 각 부분을 구성하고, 마이크로프로세서와 FPGA의 두가지 방식으로 제어기를 구현하였다. 또한 구현된 두 가지 방식의 퍼지제어기에 대해 실험을 통하여 비교분석 하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1030-1033
• /
• 2006

The efficiency stabilization and the color coordinates in blue organic light-emitting devices (OLEDs) with a double emitting layer (DEL) consisting of 4,4'-Bis(carbazol-9-yl)biphenyl (CBP) and 4,4'-Bis(2,2-diphenyl-ethen-1-yl)diphenyl were investigated. The efficiency of the OLEDs with a DEL did not significantly change with an increase in current density. The Commission Internationale de l'Eclairage coordinates of the OLEDs with a DEL 11 V were (0.150, 0.137), indicative of a deep blue color.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1389-1395
• /
• 2007

Two series of new organic fluorophores such as asymmetrical 3-(benzimidazol-2-yl)-10-hexylphenothiazine derivatives 1 and symmetrical 3,7-bis(benzimidazol-2-yl)-10-hexylphenothiazine derivatives 2 have been synthesized. Electronic absorption, fluorescence, and electrochemistry measurements reveal that the electron withdrawing benzimidazole subunit directly connected to the phenothiazine core facilitates the charge transfer characters which were also verified by the theoretical calculations. Various substituents on the benzimidazole moieties can allow a fine-tuning of the LUMO energy levels of the molecules without significantly affecting the HOMO energy levels. The method provides a new route for designing ambipolar molecules whose energy levels are well-matched with the Fermi levels of the electrodes to facilitate the electron or hole injection/transfer in OLED devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.374-377
• /
• 2005

We proposed a new fabrication method for stable flexible LCDs using stamping method with durable elastomer such as poly(dimethylsiloxane) (PDMS). In the device, the LC molecules are isolated in pixels where LCs are surrounded by PDMS microstructure, and two substrates are tightly attached by phase separated polymer layer. The electro-optic characteristics of our cell are comparable to those of normal sample without PDMS microstructure. We propose cost-effective roll-to-roll process for large size of plastic LCDs with our method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1189-1192
• /
• 2006

We have demonstrated the novel technique for spacing two flexible substrates in stable by using rigid pillar spacer array and micro-contact printing assembling technique. Specially designed columnar structure generates self-collected adhesive polymer feature results in a good adhesion and a high mechanical stability to the external bending deformations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1168-1171
• /
• 2009

We propose a low cost, high performance, effective overdrive implementation method for liquid crystal display systems. The technique can calculate all overdrive values using higher order approximation algorithm by only three measurements. We find that our technique can be applied regardless of LCD panels. Due to its simplicity, we can also tune motion performance of the LCD systems without measurements.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.646-648
• /
• 2003

The electrical and optical characteristics of the cold cathode fluorescent lamps (CCFL) were measured and investigated under the wide ambient temperatures ranging from $-30^{\circ}C$ up to $+100^{\circ}C$. The highest luminous efficiency of the CCFL of 55 lm/W was obtained at the ambient temperature of $50^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.467-470
• /
• 2007

Ultrafine Indium tin oxide (ITO) nanoparticle was successfully fabricated by low temperature synthetic method (LTSM). Mean size of ITO nanoparticle is 5 nm, and uniformly dispersed with (222) orientated cubic structure. Using the nanoparticle, ITO thin film with good optical and electrical properties was fabricated by inkjet printing.

• Journal of Information Display
• /
• 제11권1호
• /
• pp.17-20
• /
• 2010

With the increasing demand for a better FPD image quality, better evaluation metrics and advanced display quality measurement methods are required to meet these needs. There are many measurement methods for evaluating the viewing angle of various display devices, but these methods, which include luminance drop, color shift, and contrast ratio decrease, are imperfect considering that human perception does not completely correlate to them. In this paper, a new method of measuring the perceptual angle of FPDs is proposed, considering human visual perception, which uses the color space of the color appearance model.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1429-1432
• /
• 2007

We fabricated white organic light emitting diodes(WOLED) having two complementary and three primary colors with emission layers of DPVBi / MADN : DCM2-0.5% and DPVBi / $Alq_3$ / MADN : DCM2-1.5%, respectively. WOLED using three primary colors shows broad electroluminescence including green emission peak at 510nm while optical properties of the two complementary WOLED was higher current efficiency of 6.2 cd/A than 4.9 cd/A of three primary color WOLED. The maximum luminescence of WOLED with two complimentary color was $15200cd/m^2$ along with luminous efficiency 6.2cd/A, as achieving stable white color coordinates for both of WOLEDs at (0.33 , 0.33) almost.