• Korean Journal of Materials Research
• /
• v.17 no.12
• /
• pp.660-663
• /
• 2007

Piezoelectric energy harvesting from our surrounding vibration has been studied for driving the wireless sensor node. To change the vibration energy into the electric-energy efficiently, the natural frequency of cantilever needs to be adjusted to that of a vibration source. When adding 6.80g mass on the end of the fabricated cantilever, a natural frequency shifts from 136 Hz into 49.5 Hz. In addition, electro-mechanical coupling factor increased from 10.20% to 11.90% and resulted in the 1.18 times increase of maximum output power.

• Macromolecular Research
• /
• v.12 no.4
• /
• pp.391-398
• /
• 2004

Thick-film photolithography is a new technology that combines lithography processes, such as exposure and development, with the conventional thick-film process applied to screen-printing. In this study, we developed a low-temperature cofireable silver paste applicable for thick-film processing to form fine lines using photolitho-graphic technologies. The optimum paste composition for forming fine lines was investigated. The effect of processing parameters, such as the exposing dose, had on the fine-line resolution was also investigated. As the result, we found that the type of polymer and monomer, the silver powder loading, and the amount of photoinitiator were the main factors affecting the resolution of the fine lines. The developed photoimageable silver paste was printed on a low-temperature cofireable green sheet, dried, exposed, developed in an aqueous process, laminated, and then fired. Our results demonstrate that thick-film fine lines having widths < 20 $\mu\textrm{m}$ can be obtained after cofiring.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.147-147
• /
• 2012

Cutoff probe has been used for measuring a plasma density using the cutoff peak which is located at the plasma frequency in the low pressure plasma. However, research on analysis of low frequency region of transmission microwave frequency (TMF) spectrum does not performed even though important plasma parameters are located in the low frequency region, i.e., ion plasma frequency and collision frequency. In this research, we analyzed the low frequency region of the TMF spectrum. Experimental results reveal the effect of plasma parameters on the low frequency region on the TMF spectrum. Based on the response of TMF spectrum from changing of plasma parameters, deduction of the plasma parameters was tried. This comprehensive analysis of TMF spectrum expands applicable area of cutoff probe.

• Smart Media Journal
• /
• v.8 no.2
• /
• pp.16-20
• /
• 2019

Fast Fourier Transform in the vibration acceleration analysis system has recently been utilized in the field of sensor measurement. In this paper, we propose a Fast Fourier Transform based method of detecting the normal frequency among the many frequency types of diffuse field. This normal frequency is expressed by the formula of frequency damping recognition which is calculated in a similar way to the octave center frequency. Based on this theory, this paper can more accurately inform noise producers of the degree of damping, which is different from the vibration type of diffuse field.

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2147-2158
• /
• 2006

The continuous wavelet transform (CWT) has a frequency-adaptive time-frequency tiling property, which makes it popular for the analysis of dispersive elastic wave signals. However, because the time-frequency tiling of CWT is not signal-dependent, it still has some limitations in the analysis of elastic waves with spectral components that are dispersed rapidly in time. The objective of this paper is to introduce an advanced time-frequency analysis method, called the dispersion-based continuous wavelet transform (D-CWT) whose time-frequency tiling is adaptively varied according to the dispersion relation of the waves to be analyzed. In the D-CWT method, time-frequency tiling can have frequency-adaptive characteristics like CWT and adaptively rotate in the time-frequency plane depending on the local wave dispersion. Therefore, D-CWT provides higher time-frequency localization than the conventional CWT. In this work, D-CWT method is applied to the analysis of dispersive elastic waves measured in waveguide experiments and an efficient procedure to extract information on the dispersion relation hidden in a wave signal is presented. In addition, the ridge property of the present transform is investigated theoretically to show its effectiveness in analyzing highly time-varying signals. Numerical simulations and experimental results are presented to show the effectiveness of the present method.

• Journal of Plant Biotechnology
• /
• v.36 no.2
• /
• pp.137-143
• /
• 2009

An efficient system for high frequency plant regeneration was established through investigating various factors such as plant growth regulator combinations, explant types and ages, and addition of $AgNO_3$ influenced on shoot regeneration in Brassica juncea L. cv. BARI sarisha-10. Murashige and Skoog (MS) medium supplemented with 0.1 mg/L NAA (1-naphthaleneacetic acid) and 1 mg/L BA (6-benzyladenine) showed the maximum shoot regeneration frequency (56.67%) among the different combinations of NAA and BA. Explant type, explant age, and addition of $AgNO_3$ also significantly affected shoot regeneration. Of the four type of explants (cotyledon, hypocotyl, root, and leaf explants)- cotyledon explants produced the highest shoot regeneration frequency and hypocotyls explants produced the highest number of shoots per explant, whereas root explants did not produce any shoot. The cotyledonary explants from Four-day-old seedlings showed the maximum shoot regeneration frequency and number of shoots per explant. Shoot regeneration frequency increased significantly by adding $AgNO_3$ to the medium. Two mg/L $AgNO_3$ appeared to be the best for shoot regeneration with the highest shoot regeneration frequency (86.67%) and number of shoots per explant (7.5 shoots). Considerable variation in shoot regeneration from cotyledonay explants was observed within the B. juncea L. genotypes. The shoot regeneration frequency ranged from 47.78% for cv. Shambol to 91.11% for cv. Rai-5. In terms of the number of shoots produced per explant, B. juncea L. cv. Daulot showed the maximum efficiency. MS medium supplemented with 0.1 mg/L NAA showed the highest frequency of rooting. The regenerated plantlets were transferred to pot soil and grown to maturity in the greenhouse. All plants were fertile and morphologically identical with the source plants.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.4
• /
• pp.366-373
• /
• 2005

This paper presents two new circuit topologies of the dc busline side active resonant snubber assisted voltage source high frequency link soft switching PWM full-bridge dc-dc power converters acceptable for either utility ac 200V-rms or ac 400V-rms input grid. These high frequency switching dc-dc converters proposed in this paper are composed of a typical voltage source-fed full-bridge PWM inverter, high frequency transformer with center tap, high frequency diode rectifier with inductor input filter and dc busline side series switches with the aid of a dc busline parallel capacitive lossless snubber. All the active switches in the full-bridge arms as well as dc busline snubber can achieve ZCS turn-on and ZVS turn-off transition commutation with the aid of a transformer leakage inductive component and consequently the total switching power losses can be effectively reduced. So that, a high switching frequency operation of IGBTs in the voltage source full bridge inverter can be actually designed more than about 20 kHz. It is confirmed that the more the switching frequency of full-bridge soft switching inverter increases, the more soft switching PWM dc-dc converter with a high frequency transformer link has remarkable advantages for its power conversion efficiency and power density implementations as compared with the conventional hard switching PWM inverter type dc-dc power converter. The effectiveness of these new dc-dc power converter topologies can be proved to be more suitable for low voltage and large current dc-dc power supply as arc welding equipment from a practical point of view.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.7
• /
• pp.258-267
• /
• 1999

The aim of the study is to provide fundamental information for the development of magneticfluid actuator. To achieve the aim, the force and dynamic characteristics of magenticfluid are investigated by experiment for the various of tube diameter, height and position of magneticfluid column in magneticfield according to supplied voltage of solenoid coil, wave form and frquency. From this study, actuating force of magneticfluid is generated by magneticfield. The magnitude of force increases as the intensity of magneticfield becomes strong and the center of magneticfield becomes lower than the center of magneticfluid column. And the force of magneticfluid relates to the volume of magneticfluid more than the height and diameter. The response delay time decreases as the height of magmeticfluid more than the height and diameter. The response delay time decrease as the height of magneticfluid column becomes longer and the center of magneticfield becomes lower than the center of magniticfluid column. But, the approaching time increases as supplied voltage becomes higher and the center of magneticfiled becomes higher than the center of magniticfluid column. The frequency generating maximum force is 1Hz and the critical frequency is about 4Hz.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.510-515
• /
• 2001

It was first time that low frequency R.F. derived plasma enhanced MOCVD with frimethylborate precursor was used to fabricate a new ternary compound $BO_{x}$ $N_{y}$ . The formation of BON molecule was resulted from nitrogen nitrifying B-O, and forming the angular molecule structure proved by XPS and FT-IR results. The relationship between hardness and film thickness was studied. An thickness-independent hardness was fond about 10 GPa. The empirical calculation of band-gap and UV test result showed that our deposited $BO_{x}$ $N_{y}$ thin film was semiconductor material with 3.4eV of wide band gap. The electrical conductivity, $4.8$\times$10^{-2}$ /($\Omega$.cm)$^{-1}$ also confirmed that $BO_{x}$ $N_{y}$ has a semiconductor property. The roughness detected from the as-grown films showed that there was no serious bombarding effect due to anion in the plasma occurring in the RF frequency derived plasma.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.167-168
• /
• 2008

We suggest a phy layer of a sensor node. The proposed sensor nodes work well around metal or liquids because they operate at low frequency. In addition we present a demodulation algorithm for simultaneously decoding multiple received signals and a simulation result.