• Clean Technology
• /
• v.22 no.2
• /
• pp.96-105
• /
• 2016

VOCs emissions from industries cause the air pollution and odor. In the industrial facilities, the existing odor treatment techniques have limits and problems. In this study, the optimum essential oil and metal oxide selected by screening test. lavender oil, cypress oil and TiO₂ were determined by deodorant materials and those were blended by 5%, 45%, 10%, respectively. In addition, the result of batch type experiments depending on the dilution rate, injection, rate, temperature showed that the optimum condition of deodorant is 6 mL of injection rate, and 200 times of dilution rate and the removal efficiency increased in proportion with temperature. In addition, the activation energy was calculated from the rate equation, which appeared in the 3-4 times lower than conventional deodorants.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.343-349
• /
• 2013

Crashworthy fuel cells have a great influence on improving the survivability of crews. Since 1960's, the US army has developed a detailed military specification, MIL-DTL-27422, defining the performance requirements for rotorcraft fuel cells. In the qualification tests required by MIL-DTL-27422, the crash impact test should be conducted to verify the crashworthiness of fuel cell. Success of the crash impact test means the improvement of survivability of crews by preventing post-crash fire. But, there is a big risk of failure due to huge external load in the crash impact test. Because the crash impact test itself takes a long-term preparation efforts together with costly fuel cell specimens, the failure of crash impact test can result in serious delay of a entire rotorcraft development. Thus, the numerical simulations of the crash impact test has been required at the early design stage to minimize the possibility of trial-and-error with full-scale fuel cells. Present study performs the numerical simulation using SPH(smoothed particle hydro-dynamic) method supported by a crash simulation software, LS-DYNA. Test condition of MIL-DTL-27422 is reflected on analysis and material data is acquired by specimen test of fuel cell material. As a result, the resulting equivalent stresses of fuel cell itself are calculated and vulnerable areas are also evaluated.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.301-306
• /
• 2002

In Japan, the vacancy rates of office buildings have been at high in big cities since 1992. This problem is especially acute in Tokyo, where it is estimated that over 2.27 million square meters of office floor area will be oversupplied in 2003: big urban redevelopment projects will be completed in 2003. Under these circumstances, International Cooperative Research and Development on Sustainable Urban Management by Conversion of Buildings, called “SUMCOB”, has been carried out. This research aims to regenerate urban areas by converting redundant offices into flats, although instances of conversion are still very few in Japan. This paper introduces part of current results by SUMCOB, and discusses legal problems with conversion and basic capacity of vacant offices in Tokyo. It has been confirmed that there are no constraints concerned with Real Estate Registration Law (although it requires the change of the registration after conversion). and City Planning Law. However, some criteria are incompatible with Building Standard Law and Fire Service Law if the use of the building is changed from offices to flats. Typical incompatibility between offices and flats is lightening. If the buildings do not satisfy criteria for flats, the cost of renovation works for conversion will increase. To examine the basic capacity of vacant office buildings for conversion, field surveys in Tokyo have carried out at three areas: Kodenmacho (Chuo-ku), Toranomon (Minato-ku), and Iwamonocho (Chiyoda-ku). They are typical office areas that are included in center core of Tokyo. In Chuo-ku, the oldest commercial area in Tokyo, textile merchants have been located their headquarters. In Minato-ku, many rental office buildings have been located and several large scale redevelopments are advancing. Chiyoda-ku includes Marunouchi area, which is the prime office area in Japan. Thirty percent of the buildings in survey areas suffer from over twenty percent vacant floor rate, and fifty five percent were constructed before 1990. Especially most of buildings over forty percent vacant floor rate were constructed in 1980s. Vacant office problems haven't been seen in old buildings in Tokyo yet. The number of dwelling units made from office space will influence the conversion scheme. Seventy percent of the office buildings in survey areas have floor area of less than two hundred square meters. If they have been subdivided into two bedrooms type or three bedrooms type, the number of dwelling units in a floor would be less than three. The difficulty of conversion planning derives from frontage size, depth size, and their proportion. The five categories are proposed to grasp actual requirements for converting offices into flats.

• The Korean Journal of Emergency Medical Services
• /
• v.12 no.3
• /
• pp.55-69
• /
• 2008

Purpose : The purpose of this study was to analyze the prehospital care report prepared by EMS squads of 119 center in Gyeonggi area and to identify the status of prehospital care activities, problems and improvement possibilities of the emergency care. Method : Five hundred copies of prehospital care report prepared by EMS squads in thirty-eight 119 centers under 18 fire stations in Gyeonggi area from March to April in 2008 were randomly chosen for the analysis. Data abstracted according to the purpose of the study were input and the analysis of prehospital care activities were performed using SPSS-WIN(ver. 16) statistics package. Results : 1. Total 500 cases of prehospital emergency care activities were reviewed. By sex, females were 219 (43.8%) and males were 281 (56.2%). The places of reporting were home (57.8%). According to the type of emergency, 281 cases (56.2%) were caused by disease and 291 (43.8%) were from other causes such as traffic accidents or incidental injuries. 2 The average time needed for the 119 EMS squad to arrive at the scene after being reported was 7.29 minutes. The time used at the scene for the emergency care was 7.3 minutes in average and the time to arrive at the hospital was 25.4 minutes in average. 3. In patient evaluation, in 68% of the cases more than two vital signs were measured at one time and emergency patients were 31%, and non-emergency patients were 69%. 4. In one EMS activity, average 2.15 cases of emergency care were provided to a patient. The cases where two kinds of emergency care were given were 14.4%, which is the most frequent cases. When reviewing the details of the emergency cares given to the patient including multiple cares, trivial cards (taking it easy and giving comfort) were the most frequent one as 40.6% and the medical direction of the doctor was given in only one case out of 500 cases. 5. In patient evaluation and emergency care, vital signs were provided to emergency patients at significantly higher rate comparing to the non-emergency patients. The number of emergency care performance was significantly higher in emergency cases. In emergency dispatch, the cases that EMT (1st class) was on board was 86.2%. When comparing the cases when the 1st class EMT was on board and otherwise, the cases with the presence of 1st class EMT showed more vital signs were detected but there was no significant difference in the number of emergency cares provided. Conclusion : It seemed that the on-scene emergency care did not satisfy the expectations. So it is necessary to enforce the cooperation between the elements, the qualifications of the 119 EMS squads and to improve the prehospital working environment in order to provide the better medical service at any time.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1638-1643
• /
• 2018

Multi-layer ceramic capacitors as decoupling capacitor were fabricated by dielectric composition with a high dielectric constant. The fabricated decoupling capacitors were embedded in the PCB of the 10G RF transceiver module and evaluated for the characteristics of electrical noise by the level of AC input voltage. In order to further improve the electrical properties of the $BaTiO_3$ based composite, glass frit, MgO, $Y_2O_3$, $Mn_3O$, $V_2O_5$, $BaCO_3$, $SiO_2$, and $Al_2O_3$ were used as additives. The electrical properties of the composites were determined by various amounts of additives and optimum sintering temperature. As a result of the optimized composite, it was possible to obtain a density of $5.77g/cm^3$, a dielectric constant of 1994, and an insulation resistance of $2.91{\times}10^{12}{\Omega}$ at an additive content of 5wt% and a sintering temperature of $1250^{\circ}C$. After forming a $2.5{\mu}m$ green sheet using the doctor blade method, a total of 77 layers were laminated and sintered at $1180^{\circ}C$. A decoupling capacitor with a size of $0.6mm(W){\times}0.3mm(L){\times}0.3mm(T)$ (width, length and thickness, respectively) and a capacitance of 100 nF was embedded using a PCB process for the 10G RF Transceiver modules. In the range of AC input voltage 400mmV @ 500kHz to 2200mV @ 900kHz, the embedded 10G RF Transceiver modules evaluated that it has better electrical performance than the non-embedded modules.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.14 no.1
• /
• pp.55-61
• /
• 2008

The Taekwondo is the martial arts where possibility thousand Ul of history and the ancestor is put in with specific martial arts of our nation. Also it practiced with the self defense martial arts which rules over the body and a mind and it came, the country from crisis of imminent danger won a victory with the good state affair alcoholic beverage and it was come. The ancestors condition anger the Taekwondo where the soul is put in were born again with martial arts of the world and they became and the world-wide conference was adopted with the Olympic formal item which becomes the historian of of course sports and became the martial arts in the world-wide center. In like this features martial arts even from each country condition anger and the sports raises the phase of the country is racing with of course martial arts. Specially from China it makes the right shoe which is a Chinese martial arts with condition item and sports anger the features of the martial arts origination to do and there is a possibility of seeing the features which in the succession nose sleeping martial arts perforation defends it concentrates. The martial arts perforation character is letting in religion and philosophy thought of the Orient. Confucianism and Buddhism, it puts in the teaching of friendship thoughts and heaven and earth positive and negative principles, five lines and eight divination signs. Features of like this perforation our ancestors the positive and negative principles where the philosophy of the Orient is put in, there is a possibility of searching from life and the Taekwondo which it does with at five events together. With history of the ancestor it breathes together and all Taekwondo operation every one by one it puts in the thought of our ancestors as well. The some branch it tried to listen to the representative example which the feather holds hereupon in basic operation, the Taoist garment, the belt and width tax of Taekwondo. The flesh which is healthy in the spirit which is healthy holds the feather. Taekwondo Oh! as the true feelings one martial art which accomplishes the artificial flower of the dynamic thing and the static thing at end with the perforation essentially it is deep it will be able to confirm repeatedly fire tube characteristic.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.76-83
• /
• 2021

This study examines the bending behavior of lap-spliced ultra-high-strength fiber-reinforced concrete members and evaluates the safety of the design codes for ultra-high-strength fiber-reinforced concrete structures. An experiment on a total of six beams was performed. The main variables were the fiber-inclusion and the lap-spliced length at the center of the beams. The steel fibers in a volume fraction of 2% were used, and the lap-splice lengths were determined to be 8db and 16db. As a result of the test, the specimens not reinforced with fiber lost abrupt load-bearing capacity at the lap region and did not experience yielding of the reinforcing bar. In the case of fiber-reinforced concrete, if a lap-splice length of 16db is secured, the yielding of the main reinforcing bar can be experienced, and appropriate flexural strength can be expressed. Based on the experimental results of this study, as a result of reviewing the lap-splice length calculation formulas of the current design standards and the ultra-high-strength concrete structural design recommendations, it was found that all of them were evaluated conservatively.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.136-143
• /
• 2018

Cellular automata have been applied to simulations in many fields such as astrophysics, social phenomena, fire spread, and evacuation. Using cellular automata, this study develops a model for consequence analysis of the dispersion of hazardous chemicals, which is required for risk assessments of and emergency responses for frequent chemical accidents. Unlike in cases of detailed plant safety design, real-time accident responses require fast and iterative calculations to reduce the uncertainty of the distribution of damage within the affected area. EPA ALOHA and KORA of National Institute of Chemical Safety have been popular choices for these analyses. However, this study proposes an initiative to supplement the model and code continuously and is different in its development of free software, specialized for small and medium enterprises. Compared to the full-scale computational fluid dynamics (CFD), which requires large amounts of computation time, the relative accuracy loss is compromised, and the convenience of the general user is improved. Using Python open-source libraries as well as meteorological information linkage, it is made possible to expand and update the functions continuously. Users can easily obtain the results by simply inputting the layout of the plant and the materials used. Accuracy is verified against full-scale CFD simulations, and it will be distributed as open source software, supporting GPU-accelerated computing for fast computation.

• Journal of Climate Change Research
• /
• v.4 no.4
• /
• pp.331-348
• /
• 2013

The frequency and intensity of abnormal climate caused by climate change is increasing in Korea. Also, the amount of damage from disaster is increasing rapidly. The research on vulnerability assessment analyzes environmentally, socially and economically vulnerable indicators and is ongoing to reduce the intensity of damage and establish adaptation policies for climate change. Therefore, in this study, we assessed vulnerability using weighting value derived by the regression equation. There are 3 evaluation items : vulnerability assessment for farmland erosion to flood, vulnerability assessment for health to heat wave, vulnerability assessment for forest fire to drought. For this study, indicators for each sectors were selected and spatial data for each sectors were established using GIS program. Results showed that vulnerability to heat wave was more affected by climate factors. On the other hand, vulnerability to flood and drought was more affected by social-economic factors. Then, to analysis efficiency of the regression analysis, vulnerability result was compared between the existing vulnerability research with no weighting applied and the vulnerability research with the influence of weighting value derived by the regression. This study showed that the regression analysis is efficient to provide practical and feasible alternatives in terms of planning climate change adaptation policies and it is expected to be utilized for vulnerability assessment in the future.

• The Journal of the Korea Contents Association
• /
• v.19 no.6
• /
• pp.72-79
• /
• 2019

This study tries to study the poetic beauty of the space deconstructed by the medium appearing in Moon Sam-seok's children's poetry to help with simultaneous education and guiding methodology. The research method is based on the assumption that semiotics spatial image is read. In other words, we intend to derive the poetic beauty of the space in which the great pole space built by is deconstructed by the intervention of by the medium term . Among Moon Sam-seok's series of works, the research text is "The Wind and the Fire," "The Wind and the Empty Bottle," "The Wind and Salt," "The Wind and the Rock." According to the study, the wind deconstructed a space that was differentiated by the presence or absence of matter into a "coexistence space." These poetic spaces symbolize poetic beauty as ideal places of life that coexist in a distinction but not discrimination. Second, the wind has eliminated the gap between alienation, suffering and solitude. In other words, the wind deconstructed poetic space produced poetic beauty with the 'space of communication' based on homogeneity of the nature of existence. In conclusion, Moon's poetic speech can be seen that he intended to express the discreteness of the poetic space as 'communication' and 'common life' by deconstructing it with deviation and convergence by introducing a medium.