• 지질공학
• /
• 제26권1호
• /
• pp.101-115
• /
• 2016

관정의 시멘팅 재료로 사용될 수 있는 두 시멘트 물질(KS-1 보통 포틀랜드, Class G)의 물/고체(고체=시멘트) 중량비와 첨가제인 비산재의 부피함량 변화에 따른 이들 물질들의 물리역학적 물성 변화를 파악하기 위해 실내물리역학실험을 실시하였다. KS-1 보통 포틀랜드 시멘트의 경우 물/고체(고체=시멘트) 중량비를 변화시키며, Class G 시멘트의 경우 물/고체(고체=비산재+시멘트)을 고정한 채 비산재:시멘트의 부피비를 변화시키며 시료를 제작하였다. KS-1 보통 포틀랜드 시멘트의 경우 물/고체 중량비가 증가할수록, Class G 시멘트의 경우 비산재의 함량이 증가할수록, 공극률 증가, 밀도감소, 음파속도(P, S파) 감소. 탄성상수(영율, 포아송비) 감소, 압축 및 인장강도 저하, 열전도도 감소, 비열 증가의 경향을 보였다. 또한 구속압(σ₃)의 증가와 비산재 함량의 증가는 재료의 소성파괴거동을 초래하였다. 이 실내실험결과를 이용하여, 여러 주입공 페라미터(케이싱, 시멘트층의 두께, 주입압, 주입공 경사방향 및 경사각, 주입공 심도)등을 변화 시키면서, 시멘트층의 안정성 분석을 실시하였다. 분석결과 낮은 주입압과 경사정 혹은 수평정에서는 시멘트층이 안정하였으나, 다른 조건에서는 시멘트층에서 주로 인장파괴가 관찰 되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1273-1278
• /
• 2007

The cement-asphalt mortar is a mixture of cement and asphalt emulsion, and is utilized as a underpouring materials for the railway track which is used to fill under slab panel space so as to provide a stabilized track support and a tool for reduction of noise and vibration. To increase the workability of grouting, this study investigates the effect of temperature on cement-asphalt mortar by analyzing its physical and mechanical properties before/after hardening according to the temperature (10, 15, 20, 25, $30^{\circ}C$). According to the test results, it is found that as for the physical property of fresh cement-asphalt mortar the more mixture temperature become higher or lower, the more fluidity become worse. But by increasing reducing agent amount and its unit quantity, the required fluidity is met. The compressive strength as physical property of hardened cement-asphalt mortar become lower when temperature is lower but taking it by and large the physical properties of cement-asphalt mortar before/after hardening aren't so affected by temperature and well satisfy the requirement. And it has proved that rate of expansion and freezing and thawing resistance aren't affected by temperature.

• 한국세라믹학회지
• /
• 제40권12호
• /
• pp.1229-1234
• /
• 2003

최근 광물 혼합재로서 메타카올린의 이용이 주목되어지고 있다. 본 연구에서는 메타카올린을 혼합한 시멘트 페이스트의 유동특성에 관해 조사하였다. 시멘트 페이스트의 레올로지는 실린더형 스핀들을 갖는 회전형 점도계를 사용하여 평가하였다. 메타카올린을 혼합한 시멘트 페이스트의 유동성은 물/고체비의 증가와 고성능 감수제의 치환량의 증가에 따라 증가하였다. 또한 메타카올린을 일부 치환한 시멘트 페이스트는 dilatant 거동을 나타내었다. Dilatancy는 물/고체비와 메타카올린의 양에 영향을 받았으며, 실리카 퓸의 경우는 thixotropy를 나타내었다.

• 한국세라믹학회지
• /
• 제45권6호
• /
• pp.336-344
• /
• 2008

Rheological properties of cement pastes containing blast furnace slag (BFS: 3,900, $7,910\;cm^2/g$) or fly ash powder (FA: 4,120, $8,100\;cm^2/g$) according to the ratio of water/binder (W/B) and the dosage of polycarboxylate type superplasticizer (PC) were investigated by a mini slump and a coaxial cylinder viscometer. In this experiment, the ratio of replacing OPC with BFS or FA was 30 wt%, the W/B was from 30 to 70 wt%. As a result, the fluidity of cement paste containing BFS or FA was improved with increasing W/B and the dosage of PC. BFS or FA replaced cement paste with W/B 70% and PC 0.3% showed the highest fluidity. The segregation range of cement paste was occurred below $10\;d/cm^2$ of the yield stress and below 50 cPs of the plastic viscosity by the coaxial cylinder viscometer. And also it was formed that the plastic viscosity and the yield stress of FA replaced cement paste were higher than them of BFS replaced cement paste.

• 한국세라믹학회지
• /
• 제36권1호
• /
• pp.77-81
• /
• 1999

분말도가 포틀랜드 시멘트의 물성에 미치는 영향을 알아보기 위하여, 서로 다른 분말도(2300, 2500, 3000, 3500, 3500, 4500 $\textrm{cm}^2$/g)를 갖는 5종의 일반 포틀랜드 시멘트를 제조하여, Ca(OH)2 분석, 수화열, 유동성 및 물성 측정을 하였다. 그 결과, 시멘트의 분말도가 낮아짐에 따라 수화속도는 늦어졌고 수화열 및 압축강도는 떨어졌으나 유동성은 개선되었다. 특히 2300$\textrm{cm}^2$/g 시멘트의 경우, 수화열은 3500$\textrm{cm}^2$/g 시멘트에 비교해서 약 15% 감소하였다.

• Advances in concrete construction
• /
• 제17권4호
• /
• pp.211-220
• /
• 2024

Concrete, consisting mainly of cement, water and aggregates; is the most used construction material all over the world. Cement manufacturing industry is one of the carbon dioxide producing sources that contributes to global warming. Therefore, in the last few years, there is a growing interest in using waste materials and by-products as cement replacement materials. Using these kinds of materials as a part of cement replacement reduces the air pollution, cost and also enhances some properties of concretes. In the present work, marble dust (MD) was examined as a partial cement replacement material with seven proportions as 0%, 10%, 20%, 30%, 40%, 50%, 60% and glass powder (GP) was used as an additive, 8% by cement weight, in a 0.55 water-binder ratio concrete. In order to evaluate their effects; workability, strength (compressive, flexural and split tensile), alkalinity, sulphate resistance and ultrasonic pulse velocity tests were performed. Experimental results indicated that with MD replacement and GP addition; there is a loss in the workability but improvement in mechanical properties. With 10% replacement of MD compressive, flexural and tensile strengths increased by 10.7%, 6.2% and 5.3% respectively. Moreover, up to 30% replacement of MD reasonable strength values were obtained.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.84-87
• /
• 1995

Production of high strength concrete requires a low water-cement ratio and this leads to the high cement content. Mineral admixture like fly ash(FA) is often cheaper than ordinary portland cement(OPC) and this factor in combination with possible improvement in workability and moderation of the heat evolution of the cement-rich mixes tends to encourage its use. The other mineral admisture that its use has been widly advocated is silica fume that increases compressive strength due to its pozzolanic reaction. The objective of this study is to assess the contribution of mineral admixtures(FA, SF) to the workability and the strength of concrete with low water-binder ratios. In this experimental study that investigates and analyzes the properties of fresh concrete. it is presented that using admixtures like flyash and silica fume as binding material increases properties of high strength flowing concrete having very low water cementitious ratios of 0.25 and 0.30.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.107-113
• /
• 2003

The rheology properties of cement paste with variation of quantity and type of mineral admixture were investigated. The rheology of the paste was assessed by using a HAAKE Rotovisco(RT 20) rheometer having cylindrical serrate spindle. The results were as follows: The viscosity and the yield stress of cement paste were decreased by the only replacement of 10% BFS(blast furnace slag) or the only replacement of 30% FA(fly ash), whereas SF(silica fume) increased them as the replacement quantity was increased. Increasing the dosage of HRWR(high-range water reducer), the rheology properties were improved significantly in cement paste with the replacement of SF. In addition, rheology properties of two ingredient blended pastes, such as BFS(20%)-SF(5%), FA(20%)-SF(5%), were improved more than those of three ingredient blended paste, BFS(20%)-FA(20%)-SF(5%).

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.145-151
• /
• 2000

In order to investigate the rheological properties of belite-rich cement(BRC) added polycarbonate-based superplasticizer and blastfurnace slags which have different blaines at 4500, 6000 and 8000$\textrm{cm}^2$/g, the change of minislumps and mortar slumps are measured with time. The rheological properties improve as specific surface area of added slag decreases or amount of polycarbonate-based superplasticizer increases. The slump loss can be controlled effectively by the steric hinderance effect of polycarbonate-based superplasticizer. According to the results, when mix proportion of the mortar is 1.5% mass content of superplasticizer and 30% mass addition of blastfurnace slag which blaine is 4500$\textrm{cm}^2$/g, the best mortar slump can be achieved without any significant segregation of materials.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.657-661
• /
• 2009

In this study, rheological properties of cement pastes containing ground Finex-slag (4000, 6000, 7000 c$m^2$/g) were investigated bymini-flow test and coaxial cylinder viscometer. And also blast furnace slag(4000, 6000, 7000 c$m^2$/g) were used for comparison. According to the experimental results, Finex-slag and blast furnace slag showed very similar trend in the rheological properties of the cement pastes. The fluidity of cement pastes blended Finex-slag and blast furnace slag powder were improved by high replacement ratio. In the relationship of plastic viscosity and yield stress appeared the tendency of the proportion greatly. And in the relationship of plastic viscosity, yield stress and mini-flow appeared the tendency of the inverse proportion.