• Fibers and Polymers
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2002

Cellulose carbonate was prepared by the reaction of cellulose pulp and $CO_2$ with treatment reagents, such as aqueous $Zncl_2$ (20-40 wt%) solution, acetone or ethyl acetate, at -5-$0^{\circ}C$ and 30-40 bar ($CO_2$) for 2 hr. Among the treatment reagents, ethyl acetate was the most effective. Cellulose carbonate was dissolved in 10% sodium hydroxide solution containing zinc oxide up to 3 wt% at -5-$0^{\circ}C$. Intrinsic viscosities of raw cellulose and cellulose carbonate were measured with an Ubbelohde viscometer using 0.5 M cupriethylenediamine hydroxide (cuen) as a solvent at $20^{\circ}C$ according to ASTM D1795 method. The molecular weight of cellulose was rarely changed by carbonation. Solubility of cellulose carbonate was tested by optical microscopic observation, UV absorbance and viscosity measurement. Phase diagram of cellulose carbonate was obtained by combining the results of solubility evaluation. Maximum concentration of cellulose carbonate for soluble zone was increased with increasing zinc oxide content. Cellulose carbonate solution in good soluble zone was transparent and showed the lowest absorbance and the highest viscosity. The cellulose carbonate and its solution were stable in refrigerator (-$5^{\circ}C$ and atmospheric pressure).

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.04b
• /
• pp.55-58
• /
• 2001

• Journal of Periodontal and Implant Science
• /
• v.22 no.2
• /
• pp.207.1-207.1
• /
• 1992

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.215-218
• /
• 2001

이산화탄소($CO_2$)를 사용한 셀룰로오스 카보네이트 유도체의 제조 및 재생 셀룰로오스 섬유 제조와 관련한 기초 연구성과를 이미 발표한 바 있다[1~3]. 이번 연구에서는 일정한 조건에서 제조된 셀룰로오스 카보네이트 유도체의 용해온도, 셀룰로오스 카보네이트 함량, 10% 수산화나트륨 수용액내의 산화아연의 함량 변화에 따른 용해성을 평가하여 상그림표를 작성하였다. (중략)

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.95-102
• /
• 2005

Sodium cellulose carbonate (CC-Na) dissolved in $8.5\;wt\%$ NaOH/ZnO (100/2-3, w/w) aqueous solution was spun into some acidic coagulant systems. Diameter of regenerated cellulose fibers obtained was in the range of $15-50\;{\mu}m$. Serrated or circular cross sectional views were obtained by controlling salt concentration or acidity in the acid/salt/water coagulant systems. Velocity ratio of take-up to spinning was controlled up to 4/1 with increasing spinning velocity from 5 to 40 m/min. Skin structure of was developed at lower acidity or higher concentration of coagulants. Fineness, tenacity and elongation of the regenerated cellulose fibers were in the range of 1.5-27 denier, 1.2-2.2 g/d, and $8-11.3\;\%$, respectively. All of CC-Na and cellulose fibers spun from CC-Na exhibited cellulose II crystalline structure. Crystallinity index was increased with increasing take-up speed.

• Food Science of Animal Resources
• /
• v.20 no.3
• /
• pp.199-206
• /
• 2000

축육 생산시 주요 부산물인 돼지 심장근으로부터 항산화제(0.02% propyl gallate, 0.2% asxorbic acid, 0.2% sodium tripolyphosphate) 첨가 세척액(25 mM phosphate buffer, pH 6.0)에 의해 제조된 surimi(5% protein 0.6 M NaCl, 25 mM phosphate buffer, pH 6.0)를 alginate(0.4%), calcium carbonate(0.075%) 및 lactate(0.6%) 등의 첨가에 의해 AC surimi 로 조제한 다음, CMC 또는 MC를 일정수준 (0.5%, 1.0%) 첨가하여 surimi 의 pH, 겔의 보수력과 조리 손실을 비롯하여 겔읨 루성을 비교 검톻였다. CMC 첨가시 pH는 0.2 단위씩 감소하는 경향을 보인데 비해 MC 첨가시에는 뚜렷한 변화를 보이지는 않았다. 조리 손실에 대한 영향을 살펴 본 결과 CMC와 MC 첨가구에서 0.5% CMC 첨가구를 제외하고서는 나머지 세 처리구에서 감소하는 경향이었고, 특히 MC 첨가시에는 대조구에 비해 뚜렷한 감소 경향을 나타내었으나(p<0.05) 첨가수준에 따른 차이는 나타나지 않았다 CMC나 MC의 첨가는 보수력에 대해서는 거의 영향을 미치지 않은 것으로 나타났고, 물성에 대한 측정 결과에서 CMC 첨가시에는 겔의 강도. 경도 및 탄성등은 약간 증가하였으나 유의적인 차이를 나타내지는 않았고 (P<0.05), MC 첨가시에는 뚜렷한 차이를 나타내지 않았으며, 겔 응집성에 대해서는 CMC와 MC 첨가에 의해 서로 다른 경향을 나타내었다.

• Textile Coloration and Finishing
• /
• v.4 no.2
• /
• pp.69-75
• /
• 1992

This study was carried out to compare the effect of caustic soda with the effect of caustic potash on cotton fabric. Instead of caustic potash, sodium carbonate similar in chemical composition to caustic potash was used. The damage of cotton cellulose by repeated washing in various alkaline solutions at 8$0^{\circ}C$, 60 rpm was examined. The damage of cotton cellulose by the variation of copper number, carboxyl content, degree of polymerization and retained tensile strength was estimated. The results obtained at this study are as follows; 1. The damage of cotton by caustic soda was severer than caustic potash. The retained tensile strength at 50 washing cycle in caustic soda was 59% and in sodium carbonate was 80%. 2. By adding soap to caustic soda, the damage of cotton fabric decreased because contact area between fabric and air diminished by foam. 3. Detergency of EMPA 101 in caustic soda was lower than sodium carbonate. Consequently, using caustic soda that damage fabric severely and have lower detergency for caustic potash is unreasonable.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.51-63
• /
• 1994

There has been many attempts to develop a method that can regenerate periodontal tissues that were lost due to periodontal diseasd, but none of them was completely successful. This study was designed to investigate the healing and regeneration of periodontal tissue when bone substitutes such as porous replamineform hydroxyapatite and porous resorbable calcium carbonate were used in combination with oxidized cellulose membrane and collagen absorbable hemostat, compared to a control where only oxidized cellulose membrane or collagen absorbable hemostat were used. Chronic periodontitis was induced on mandibular premolars of and adult dog by placing orthodontic elastic ligatures for 10 weeks. After flap operation, the control group were received oxidized cellulose membrane (control- I )or collagen absorbable hemostat (control- II) only, while one experimental group was given either porous replamineform hydroxyapatite or porous resorbable calcium carbonate in addition to oxidized cellulose membrane (Experimental I-A, I-B), and another experimental group was treated by using either porous replamineform hydroxyapatite or porous resorbable calcium carbonate in addition to collagen absorbable hemostat. (Experimental II-A, II-B) After 56 weeks, healing was histologically analyzed with the following results. 1. Apical migration of junctional epithelium was observed only in areas coronal to the notch for both control and experimental group. 2. Inflammatory cell infiltration was not observed in any groups. 3. Oxidized cellulose membrane and collagen absorbable hemostat were completely resorbed. 4. Newly-formed cementum was observed up to the level where junctional epithelium was located, for both control and experimental groups. 5. Bone formation was limited of the middle portion of the notch in the control group, where as experimental groups showed bone formation up to the level of implant materials coronal to the notch. 6. Minute resorption of apically located portions of implanted materials was observed in experimental group I-B and II-B only.

• Journal of Institute of Convergence Technology
• /
• v.1 no.2
• /
• pp.33-36
• /
• 2011

Ionic liquids based on formate and hydrogen carbonate anions were synthesized for use as solvents for the effective dissolution of cellulose and the regenerated cellulose was in the native lattice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.2
• /
• pp.137-140
• /
• 1982

Three levels of inoculum concentration from 10 to 30 percent, three kinds of adhesive materials, gum arabic, methyl cellulose and carboxy methyl cellulose, and five different pelleting materials including 4 different sources of lime and calcium carbonate were compared to investigate an optimum condition for seed inoculation by counting the number of viable rhizobium cells. For a peat-cultured Rhizobium inoculant, 10 per cent was found to be an optimum by showing 3.5 $\times$ 10$^9$ viable cells per seed. The highest number of viable cells were observed from gum arabic at 40 per cent, methyl cellulose at 5 per cent and carboxy methyl cellulose at 4 per cent. Among pelleting materials, a dental lime for investment originated from Ransom & Randolph Co. Ohio, U.S.A. resulted best as pelleting material.