• 멤브레인
• /
• 제24권2호
• /
• pp.136-141
• /
• 2014

본 연구에서는 셀룰로오즈 아세테이트(Cellulose acetate)를 이용하여 정삼투막을 제조하였으며 분리막 성능평가를 진행하였다. 분리막의 염제거율과 정삼투 공정에서의 투과성능 변화의 상관관계를 규명하기 위해 각기 다른 염제거율을 가지는 분리막을 제조하고 정삼투 장치를 이용하여 막 투과 성능을 평가하였다. 분리막의 구조가 정삼투 투과성능에 미치는 영향을 알아보기 위해 각기 다른 용매를 이용하여 분리막을 제조하였다. 또한 제조된 분리막의 구조는 주사전자현미경(scanning electron microscopy)을 통해서 확인하였으며 정삼투 장치 운전을 통해 투과성능 변화를 알아보았다.

• Membrane and Water Treatment
• /
• 제13권3호
• /
• pp.139-145
• /
• 2022

Development in advanced separation processes leads to the significant advancement in polymeric membrane preparation methodology. Therefore, present research investigated the preparation and characterization of cellulose acetate membrane by phase inversion separation method to determine optimized operating parameters. Prepared CA membrane's performance was been analyzed in terms of % rejection and flux. Investigation was conducted to study effect of different parameters such as polymer concentration, evaporation rate, thickness of film, coagulation bath properties, temperature of polymer solution and of the coagulation bath etc. CA membrane was fabricated by taking polymer concentration 10wt% and 11wt% with zero second evaporation time and varying film thickness over non-woven polyester fabric. Effect of coagulation bath temperature (CBT) and casting solution temperature were also been studied. The experimental results from SEM showed that the surface morphology had been changed with polymer r concentration, coagulation bath and casting solution temperature, etc. Lower polymer concentration leads to lower precipitation time giving porous membrane. The prepared membrane was tested for advanced waste water treatment of relevant effluent stream in pilot plant to study flux and rejection behavior of the membrane.

• 공업화학
• /
• 제3권2호
• /
• pp.327-334
• /
• 1992

저준위 방사성 액체폐기물의 새로운 감용방법으로써 cellulose acetate막을 사용한 투과증발법의 연구가 수행되었다. 실험결과에 의하면 일반적으로 유기물의 분리에 사용되는 투과증발법은 액체폐기물의 감용을 위한 제염효과가 우수하였고, 수분의 증발속도도 저준위 방사성 액체폐기물의 감용을 위해 널리 사용되는 자연증발에 비해 현저히 빨랐다. 또한 주입용액의 조건에 따른 실험결과를 토대로 투과증발특성을 평가하였으며, 투과증발량을 증가시키기 위해 cellulose acetate막의 최적제막조건을 설정하였다.

• Membrane and Water Treatment
• /
• 제7권6호
• /
• pp.507-520
• /
• 2016

The effect of ZnO on cellulose acetate in the removal of benzophenone-3 (BP-3) was investigated. The benzophenone-3 (BP-3) which is an endocrine disrupting chemical (EDC) was completely removed (100%) from the drinking water using Cellulose Acetate (CA) and zinc oxide (ZnO) composite membranes. The membranes were prepared by DIPS method and the filtration experiments were conducted by dead end filtration unit. The macrostructure of the membrane were studied by ATR-IR and XRD Spectra's. Atomic force microscopy (AFM) and Scanning electron microscopy (SEM) were used to study the micro properties of the membranes. The laboratory experiments such as water uptake study and pure water flux performed to confirm the increasing hydrophilicity. The enhancing hydrophilicity was confirmed with respect to higher the concentration of nanoparticles. Evaluation of BP-3 removal was carried in different experimental conditions, such as, different Trans membrane pressure and different concentration of feed. The membrane with low pressure showed better performance by rejecting 100% of BP-3. However, 1 ppm, 3 ppm and 6 ppm of feed solution was used and among them 3 ppm of feed solution gives 100% rejection. The ZnO nanoparticales enhances the performance of CA membrane by showing maximum rejection.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2000년도 제12회 심포지움
• /
• pp.39-42
• /
• 2000

No Abstract, See Full Text

• Membrane and Water Treatment
• /
• 제3권3호
• /
• pp.201-209
• /
• 2012

Membrane separation technologies have some of advantages are considered a better alternative to traditional methods. Research of novel membranes is very vital for covering the higher required of membrane in several purposes like water desalting technology. In this work polyamide-6/cellulose acetate (PA-6/CA) blend membrane was developed according to the wet phase inversion system. The structures of the prepared membranes were examined by scanning electron microscopy (SEM). SEM images showed uniform particles distribution in the prepared membranes. Moreover, SEM images revealed that the membranes have relatively uniform surface (PA-6/CA). PA-6/CA blend membranes systems are evaluated by using synthetic NaCl solution. The separation performance showed that salt rejection increased with increasing of heat treatment of the casted films and it was improved with increasing of operating pressure.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.83-90
• /
• 1999

A cellulose acetate membrane containing silver nitrate was prepared by gelatinizing in water at $2^{\circ}C$ after evaporating solvent from the casting solution on a glass plate. Permeation experiments for oxygen and nitrogen were conducted in the ranges of temperature, $5-40^{\circ}C$ and pressure difference, $1-5kg/cm^2$ in order to investigate the effects of temperature and pressure difference on permeation characteristics of the membrane. When the evaporation time was increased, the permeability of oxygen decreased but the separation factor of oxygen against nitrogen increased since a more dense layer was formed on the membrane surface. When the silver nitrate was added, the permeation flux was doubled and the separation factor was improved from 3.0 to 3.3. This implies that silver nitrate acts as an oxygen carrier in the membrane.

• 공업화학
• /
• 제7권4호
• /
• pp.605-613
• /
• 1996

Cellulose acetate(CA) 비대칭막, CA 복합막 그리고 cellulose triacetate(CTA) 비대칭막을 통한 순수 이산화탄소 및 메탄의 투과 특성을 측정하여, 투과성능의 운전압력에 대한 영향을 조사하였다. 그리고 이산화탄소와 메탄의 혼합기체($CO_2/CH_4=57.6/42.4$)에 대한 투과 특성을 조사하여, 이를 순수 기체의 투과 특성으로부터 얻어진 결과와 비교하였다. 실험은 25~125 psig의 분압과 상온에서 실험하였다. CA 복합막과 CTA 막을 통한 기체의 투과거동은 CA 막의 투과 거동과 비슷하였다. CA 막, CA 복합막 그리고 CTA 막을 통한 순수 이산화탄소의 투과속도는 상부분압이 증가함에 따라 약간 증가하였으며, 반면에 메탄의 경우에는 상부분압에 의존하지 않고 일정하였다. 그러나 혼합기체의 경우 이산화탄소에 의한 가소화 효과와 각 기체의 경쟁효과에 의해 순수 기체와는 다른 투과거동을 보였다. 각각의 분리막의 투과성능을 비교 할 때, CTA 막의 분리인자와 투과속도가 CA 막의 값들보다 높은 값을 나타내었으며, CA 복합막의 투과속도가 CA 막의 값보다 높은 값을 가졌다. 그러나 CTA 막의 경우 기계적 강도가 매우 낮았다. 결국 본 연구에 사용된 CA 복합막이 투과 플럭스가 크므로 이산화탄소와 메탄의 분리용 막으로 적합하다고 생각된다.

• 멤브레인
• /
• 제24권2호
• /
• pp.167-175
• /
• 2014

수증기 투과성과 DMMP 방호성능을 가지는 cellulose acetate butyrate (CAB)/polyethyleneimine (PEI) 기반의 선택투과막에 대해 여러가지 첨가제를 적용하여 CEES에 대한 방호성능 개선을 시도하였다. 시험결과, CAB/PEI 기반의 선택투과막은 수증기 투과성은 그대로 유지하면서(${\geq}1,800g/m^2/day$), CEES에 대한 방호성능의 개선을 보여주었다($7.1{\sim}11.5{\mu}g/cm^2{\cdot}24hr$). 이 중, $Ag^+$ 이온과 이온교환수지 혼합물을 포함한 CAB/PEI 선택투과막에서 가장 우수한 방호성능을 확보하였다. 그리고 시험한 모든 선택투과막은 생물학작용제를 모사할 수 있는 다양한 크기의 에어로졸 입자($0.005{\sim}3{\mu}m$)에 대해서도 방호성능을 가짐을 확인하였다.

• 한국염색가공학회지
• /
• 제3권2호
• /
• pp.43-48
• /
• 1991

Cellulose acetate (CA) and poly-4-vinyl pyridine (PVP) in various weight proportions were mixed in a mixed solvent of trifluoroacetic acid: methylene chloride/6:4 (v:v). CA was miscible with PVP in that solvent system. CA/PVP/solvent show liquid crystal in a certain range of concentration and the nature of that liquid crystal was cholesteric. Films of the liquid crystal composite cast from the liquid crystal solutions of CA/PVP were tested in a viewpoint of biomembrane. Results show that considering permselectivity CA/PVP membrane is better than that of CA and CA/PVP membrane is closer to cell membrane.