• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.117-120
• /
• 1995

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.1
• /
• pp.84-89
• /
• 1985

Chemical composition, dry matter and cellulose digestibilities and fermentation rates of alfalfa and orchard grass cut at different time were estimated in vitro method and the results summurized as follows: 1. Crude protein, crude fiber cwc and cellulose content of Alfalfa were decreassed as advancing cutting time. Crude protein, crude fiber and cwc content of Orchard grass were decreased as advancing cutting time up to 3 cutting, but crude protein was slightly increased at 4th cutting, crude fiber and cellulose content were higher at 2nd cutting, but decreased thereafter. 2. DM digestibility of Alfalfa was 51.80, 51.86, 52.92 and 59.52% at 1, 2, 3 and 4th cutting time, respectibly, thus slightly increased as advancing cutting time, and cellulose digestibility of Alfalfa was not much different with different cutting time. DM digestibility of Orchard grass was 62.21, 66.10, 60.95 and 66.32% at 1, 2, 3 and 4th cutting time, respectibly, and cellulose digestibility of Orchard grass was slightly increased at 3rd cutting time and then increased at 4th cutting time. 3. Fermentation rate of DM of alfalfa was the highest 1st cutting time (0.83%/hr.) and was not different at 3 and 4th cutting time. Cellulose fermentation rate of Alfalfa was the highest at 1st cutting time (1.29%/hr.), decreased at 2 and 3th and then increased at 4th cutting time. Fermentation rate of DM of Orchard grass was 1.42, 1.58, 1.60 and 1.57%/hr. and of cellulose was the highest at 2nd cutting time (1.77%/hr.)

• Journal of Nutrition and Health
• /
• v.17 no.4
• /
• pp.253-261
• /
• 1984

The effect of fiber sources on lipid metabolism was investigated in relation to the level of dietary fat. After rats were fed each diet for 4 weeks, all animals were sacrificed to collect the liver, and blood samples by heart puncture. Total lipid, total cholesterol, phospholipid and HDL- cholesterol were determined in serum. Total lipid and total cholesterol were also determined in liver. These results were compared with the histochemical appearances by the method of Oil red-O staining. Higher level of fat in the diet appeared to increase the total lipid levels in serum and more fat in the liver cells were shown from the high fat diet judging from the E.M. pictures. Phospholipid concentration in serum was greater in the rats of high fat groups than those of the control or non-fat groups. High fat level caused to decrease the HDL- cholesterol concentration in serum. Pectin decreased serum and liver lipids and the deposit of fat in the liver cells. HDL-cholesterol levels in serum was increased by pectin. Whereas the cellulose supplementation had no effect to reduce serum and liver total lipid levels, and cellulose did not decreased the deposit of fat in the liver cells. From these results, it is concluded that dietary fat levels led to changes in the lipid metabolism of rats and pectin may exhibit a lowering total lipid contents in serum and liver. Cellulose may slightly elevate serum and liver levels, or have no lowering effect.

• Journal of Nutrition and Health
• /
• v.21 no.3
• /
• pp.164-172
• /
• 1988

This study was performed to investigate the effects of sources and levels of dietary fiber on lipid metabolism in rats. Male weanling rats of Sprague-Dawley were fed ad libitum a diet containing perctin or cellulose at 5%, 10% and 20% for 4 weeks. Rats fed pectin gained significantly less weight than rats fed cellulose. Feed efficiency ratio was decreased at 10% and 20% group rats of pectin compared to control rats. Pectin was effective in lowering liver cholesterol, total lipid and triglyceride content at all levels. Whereas the cellulose supplementation had no effect to reduce serum and liver lipids. Cellulose led to an accumulation of serum and liver cholesterol. The least accumulation of lipid was in fed a cholesterol free diet. It is likely that lipid metabolism is quite different between pectin and cellulose feeding.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.63-70
• /
• 2005

The purpose of this study was to investigate how to modify the physical properties of cellulose after thermal treatment. Cellulose was treated between $225^{\circ}C$ and $325^{\circ}C$ for 3 hrs under air flow, and then the thermally treated cellulose was measured to specific surface area, constitute elements, consumption ofacid and base, as well as the adsorption capacity of ethylamine vapor. The higher was the treating temperature from $225^{\circ}C$ to $325^{\circ}C$, the lower was the total yield of cellulose. Elemental analysis revealed that carbon content in thermally treated cellulose was gradually increased in proportion to temperature increment. The amount of acidic functional groups tended to increase up to $300^{\circ}C$, after then to be lowered slightly. In principle, no alkaline functional groups were found in thermally treated cellulose. In case of treatment with $325^{\circ}C$, only a few amount of alkaline functional groups were detectable. Specific surface area of thermally treated cellulose are determined to $1.9m^2/g$, which value can become higher when the treated temperature rises. The thermally treated cellulose at $275^{\circ}C$ shows the highest adsorption capacity of ethylamine at $40^{\circ}C$ for 4 hrs. Solubility of those two celluloses with WPG (Weight Percent Gain) value of 113% and 108%, respectively, was determined to almost 100%. X-ray diffractogram of thermally treated cellulose suggested that the crystalline structure of cellulose began to be destroyed at the temperature of $275^{\circ}C$. As a conclusion, changes of such a physical properties make it possible to weaken inter and/or intra hydrogen bond in crystal region of cellulose macromolecules. When thermally treated cellulose adsorbs ethylamine, it turns to be well soluble to water.

• Journal of Korea Foresty Energy
• /
• v.17 no.1
• /
• pp.30-35
• /
• 1998

The cellulose modification can be made in steps, giving a range of new products having properties quite different from the parent cellulose. Effective molecular weight control and narrow molecular weight distribution of the polyacrylonitrile can be accomplished by anionic polymerization technique. Preformed polyacrylonitrile was grafted precisely onto cellulose acetate by SN$_2$ reaction mechanism in a simple and effective way under homogeneous reaction condition. The 3.5g of completely dried cellulose acetate(DS=2.4) dissolved in 50ml of dry THF was transferred to the 215m1 polyacrylonitrile solution. The mixture was stirred vigorously under nitrogen atmosphere for 2 hrs. FTIR spectra of cellulose acetate and grafted cellulose acetate were taken, and their characteristic bands were identified.

• Journal of Korea Foresty Energy
• /
• v.18 no.2
• /
• pp.62-69
• /
• 1999

Lignin in wood cell walls influeced the transformation of the cellulose crystal structure during mercerization. Samples of sound and decayed woods by white rot fungus of Quercus mongolica were treated with 20% aquous NaOH solution, followed by washing and drying, and delignified. The effect of delignification on cellulose structure was investigated by a series of an X-ray diffraction analysis and ultraviolet(UV) microscopy. Delignification of alkali-treated woods did not influence their cellulose crystal structures. It may be concluded that lignin prevents the swelling of wood cellulose during mercerization and restrain the intermingling of cellulose chains.

• Korean Journal of Food Science and Technology
• /
• v.39 no.5
• /
• pp.521-526
• /
• 2007

In this study, we prepared methyl cellulose (MC) and hydroxypropylated methyl cellulose (HPMC) films with polyethylene glycol (PEG) or polyphosphates as elongation enhancing materials, and with lipid layers as moisture barrier materials. We then determined their physical properties and compared the data with target physical properties such as a tensile property of 13.0 MPa, elongation of 130%, and water vapor permeability of $3.47{\times}10^{-2}ng{\cdot}m/m^2{\cdot}s{\cdot}Pa$. The PEG and polyphosphates were required for enhancing elongation, while the coating method seemed better than the emulsion method when applying the lipid layers. With respect to elongation, the MC films were better than the HPMC films.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.259-264
• /
• 1994

Heparin binders (Cell-PALA) used for selective heparin removal from blood, were prepared by immobilizing a cationic polymer, poly(allylamine) (PALA), onto cellulose substrate by a novel method. Their absorbing capacity for heparin was compared with untreated cellulose control using heparin solution in vitro. The surface areas of obtained heparin binders and untreated cellulose were 1.36 and ($2.56{\mu} g$/$cm^2$, respectively. The amount of bound heparin to PALA immobilized celluloses was determined to be 0.16 - $0.30{\mu}g$/cm, which is much higher than that of untreated cellulose ($0.03{\mu} g$/$cm^2$). These results suggest that Cell-PALA materials can be utilized for a heparin removal system.

• Journal of Life Science
• /
• v.12 no.5
• /
• pp.566-569
• /
• 2002

Acetobacter strains are bacteria that can synthesize cellulose when grown on an undefined medium containing glucose. Several culture conditions affecting cellulose production by Acetobacter sp. A9 were examined by cultivating cells under shaking cultures. The addition of buffering agents, such as 3-(N-morpholino) propanesulfonic acid (MOPS) and CaCO$_3$, increased cellulose production. It suggests that pH of culture medium is important to an economical mass cellulose production. Addition of bead (Ф10 w) to culture medium stimulated 'disintegrated bacterial cellulose' production.