• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.114-121
• /
• 2006

In this paper, the concept of design for environment (DFE) was introduced to mechanical design and manufacturing of cellular phone case. A new evaluation method integrated in existing product manufacturing process was developed and applied to two different types of cellular phone cases: foldable type and slider type. The evaluation results suggested that scores for 'refurbishments & recycle' criterion were relatively low for their cases. This evaluation method may assist designers to draw a checklist of the product's weak points from the perspective of DFE. From the checklist, the designers can consider possible improvements in future design.

• Journal of Internet Computing and Services
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2003

Nowadays, various wireless internet contents are serviced in a cellular phone. However, because of the memory limit of the cellular phone, you should delete the wireless internet contents periodically. Also it has been quite inconvenient to move the existing data to a new cellular phone. In this paper I proposed MobileFolder to reuse wireless internet contents and provided a simple client application in a VM environment.

• Journal of the Microelectronics and Packaging Society
• /
• v.3 no.2
• /
• pp.1-6
• /
• 1996

최근 Cellular phone시장을 가장 주도적으로 이끌어 오고 눈부신 발전을 가져온 것 은 역시 개인 휴대형 Cellular phone이라 할수 있을 것이다. Cellular phone의 기본목표인 언제나, 어디서나, 누구라도라는 목표에 정확하게 부합할 수 있었기 때문이라 생각한다. 특 히 그 사용형태가 개인 휴대형이기 때문에 사용자들은 보다 소형화, 경량화, 다기능화를 요 구했고 Cellular phone의 제조 Maker들은 그 요구에 부응할 수 있는 제품을 설계하고 생산, 판매하는데 주력해오고 있다. 휴대전화에 있어서 소형화, 경량화를 주도해온 요인으로서 가 장 큰 역할을 해온 것은 어느 것이 먼저라기 보다 PWB의 수량감소, 다층화, 고밀도화, Flexible화, 실장부품의 소형화, Chip화에 따라 부품탑재기의 고속화 정밀화등 다양화된 새 로운 실장기술이 부합되어 현재, 향후는 더욱개선될것이라 사료된다. 그래서 이번 원고에서 는 휴대전호기만이 아니라 일반통신기기 및 민생용 기판의 실장기술 및 납땜품질, 생산성, 효율등을 위해서 표면실장공정 삽입실장공정에서 발생되고 있는 문제의 50%이상을 점유하 는 납땜에 대한 문제를 사전에 예방하여 표면실장 기술력을 높이는 것이 더욱 중여하다는 사실에 역점을 두고 당사생산 Model인 H500 Series에 대한 기본을 기술한다.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.101-106
• /
• 2014

As ESL(Electronic Shelf Label) system is increased at the market in the world, the interference between ESL system and Wi-Fi(Wireless Fidelity) Cellular Phone at 2.4GHz becomes issue. The interference scenario and propagation of the Extended HATA Model were established to analyze the interference from Wi-Fi Cellular Phone into ESL system. Through simulation results based on SEAMCAT(Spectrum Engineering Advanced Monte Carlo Analysis Tool), separation distance was obtained to protect ESL system from Wi-Fi Cellular Phone interference.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1083-1088
• /
• 2004

Zinc air batteries obtain their energy density advantage over the other batteries by utilizing ambient oxygen as the cathode materials, and reusing cathode as recycled form. And specific capacity of zinc powder is as high as 820mAh/g. Our research team succeeded in producing 2.4 Ah class zinc air battery for cellular phone application. In this paper we had studied performance of cathode according to various factors and demonstrated the performance of 2.4 Ah class zinc air battery for cellular phone application.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.6
• /
• pp.963-968
• /
• 2013

In this study, we carried out a structural analysis for determining the stresses acting on the tempered glass of a freely falling cellular phone using ANSYS 13.0, commercial finite element code. We designed a phone heavier than any contemporary cellular phone and performed finite element analysis using the falling speed at a height of 104 cm, which is equal to of the average leg length of Koreans. By determining the maximum stress acting on the phone's tempered glass and frame, we identified the location of large deformation. Furthermore, we evaluated the maximum/minimum equivalent stress and deformation of the reinforced glass and frame as functions of time.

• The Korean Journal of Community Living Science
• /
• v.13 no.2
• /
• pp.1-11
• /
• 2002

This study was conducted to estimate the amounts of the electromagnetic wave penetrating from a cellular phone in a pocket of dress shirt, as well as to test how different the penetration amounts were under the conditions of wearing. It was also investigated the possibilities that the amounts of the electromagnetic wave penetrating could be decreased by using twofold pocket or electromagnetic wave free fabric. The amounts of the electromagnetic wave penetrating were measured in the following five cases; one-layered pocket with 10 different fabrics as dress shirt, a pocket adding a layer of knitted cotton, two-layered pocket with same fabric as dress shirt, two-layered pocket adding a layer of knitted cotton, and one-layered pocket adding a layer of electromagnetic wave free fabric. Each of these five cases were measured using the front and back sides of a cellular phone facing to the body. The results were as follows; 1) The amounts of the electromagnetic wave penetrating were not significantly different in 10 different fabrics and were all above the caution range (0.02mW/$cm^2$). 2) The amounts of the electromagnetic wave penetrating in cases of the back side of the cellular phone to the body, were more than in cases of the front side. 3) There is a significantly differences in part on adding a knitted under wear to one and two layers of the pocket in the case of penetration amount under the wearing conditions. 4) The amounts of the electromagnetic wave penetrating in cases of adding a layer of electromagnetic wave free fabric, were close to the safe standard value of it. The above results suggested that facing the front side of cellular phone to the body and using extra layering with some electromagnetic wave free fabrics might have some protective effects again to the penetration amounts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.455-462
• /
• 2009

The present study focused on the status of functional use and demands for cellular phone in the aged. Through a survey of 206 aged people, we asked the present use of UI(User Interface) and problems in use of functions of cellular phone. The survey consist of questions about use of internet and mobil products, receptiveness of various mobil contents and machines, and marketable evaluation. The results showed that great part of elder people used only cellular phone as telephone. However, it appeared that relatively younger people in the participants In survey used more and more various functions of cellular phone such as digital camera. Moreover, according to the situations of health, economy, culture of participants, they demanded more various functions and UI in cellular phone.

• The Journal of the Korea Contents Association
• /
• v.14 no.2
• /
• pp.355-363
• /
• 2014

The purpose of this study is to find out the effect of using cellular phone dependence of middle school student based on Agnew's GST. A total of 2,151 questionnaires were used to Korean Children and Youth Panel Survey(KCYPS)2010. Analytical methods of Structural Equation Model(SEM) was verified by AMOS 21.0 Ver. The results were the following. Firstly, The fit of definitive model was $X^2=1398.997$, df=144, GFI=.937, NNFI(TLI)=.902, CFI=.918, RMSEA=.061. Model was proper to verify the use of cellular phone dependence of adolescents. Secondly, The strain factors of middle school student presented statistically significant positive effect to make negative life satisfaction. Finally, The negative life satisfaction of middle school student presented statistically significant positive effect to the use of cellular phone dependence of middle school student. We need to provide as basic data for developing cellular phone dependence intervention programs.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.6
• /
• pp.453-463
• /
• 2014

Objective:The purpose of this study is to identify motion patterns for cellular phone and propose a method to identify motion patterns using a motion capture system. Background: In a smart device, the introduction of tangible interaction that can provide new experience to user plays an important role for improving user's emotional satisfaction. Firstly, user's motion patterns have to be identified to provide an interaction type using user's gesture or motion. Method: In this study, a method to identify motion patterns using a motion capture system and user's motion patterns for using cellular phone was studied. Twenty-two subjects participated in this study. User's motion patterns were identified through motion analysis. Results: Typical motion patterns for shaking, shaking left and right, shaking up and down, and turning for using cellular phone were identified. Velocity and acceleration for each typical motion pattern were identified, too. Conclusion: A motion capture system could be effectively used to identify user's motion patterns for using cellular phone. Application: Typical motion patterns can be used to develop a tangible user interface for handheld device such as smart phone and a method to identify motion patterns using motion analysis can be applied in motion patterns identification of smart device.