• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.130-137
• /
• 2006

TFT-LCD(Thin Film Transistor Liquid Crystal Display) module is representative commercial product of FPD(Flat Panel Display). Thickness of TFT-LCD module is very thin. It is adopted for major display unit for IT devices such as Cellular Phone, Camcorder, Digital camera and etc. Due to the harsh user environment of mobile IT devices, it requires complicated structure and tight assembly. And user requirements for the mechanical functionalities of TFT-LCD module become more strict. However, TFT-LCD module is normally weak to high level transient mechanical shock. Since it uses thin crystallized panel. Therefore, anti-shock performance is classified as one of the most important design specifications. Traditionally, the product reliability against mechanical shock is confirmed by empirical method in the design-prototype-drop/impact test-redesign paradigm. The method is time-consuming and expensive process. It lacks scientific insight and quantitative evaluation. In this article, a systematic design evaluation of TFT-LCD module for mobile IT devices is presented with combinations of FEA and testing to support the optimal shock proof display design procedure.

• 한국표면공학회지
• /
• 제44권5호
• /
• pp.213-219
• /
• 2011

Recently aspheric lenses are widely used for superpricision optical instruments, such as cellular phone camera modules, digital cameras and optical communication modules. The aspherical lenses are processed using mold core under high temperature compressive forming pressure. It is imperative to develop superhard protective films for the life extension of lens forming mold core. Especially ta-C films with higher $sp^3$ fractions receive attentions for the life extension of lens forming mold and, in turn, the cost reduction of lenses due to their suprior high temperature stability, high hardness and smooth surfaces. In this study ta-C films were processed on WC mold as a function of substrate bias voltage using FVA (Filtered Vacuum Arc) method. The processed films were characterized by Raman spectroscopy and nano-indentation to investigate bonding nature and hardness, respectively. The film with maximun 87% of $sp^3$ fraction was obtained at the substrate bias voltage of -60 V, which was closest to ta-C film. ta-C films showed better high temperature stability by sustaining relatively high fraction of $sp^3$ bonding even after 2,000 glass lens forming applications.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1343-1354
• /
• 2007

카메라, 휴대전화, 노트북 등과 같이 휴대 가능한 전기전자기기들은 대부분 2차 전지로부터 전원을 공급받고 있다. 2차 전지로서는 타 전지에 비하여 고 에너지 밀도와 고 전압의 특성을 갖고 있는 리튬2차전지가 가장 많이 활용되고 있으며, 이 특성 때문에 전기자동차, 우주왕복선, 분산전원의 한 형태인 전력 저장장치에까지 그 이용이 확대되고 있다. 그러나, 시스템의 최적성능을 보장하기 위해서는 용도별 싸이클 수명성능을 고려한 충방전 설계 및 이를 위한 전기적 등가모델의 정확성이 필수적이다. 따라서, 본 논문에서는 상용 리튬이차전지의 실제 실험 데이터에 근거하여 충/방전 심도 함수를 도출하고, 리튬이차전지의 수명성능평가를 위한 충/방전 특성 모델을 제안하고, 이의 타당성을 입증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.976-979
• /
• 2005

This paper is about the development of automatic FPC(flexible printed circuit) punching instrument for the improvement of working condition and cost saving. FPC is used to detect the contact position of keyboard and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation Is done manually, the accuracy of the punching degree is varied with operator's condition. To improve this manual punch ing operation to the FPC, automatic FPC punching system is introduced. Test algorithms and programs showed good results to the designed automatic punching system and led to the increasement of productivity and huge cost down to law material like FPC by avoiding bad quality.

• 한국정보통신학회논문지
• /
• 제12권8호
• /
• pp.1495-1504
• /
• 2008

2007년부터 흰색 바탕의 자동차 번호판이 등록되어 사용되고 있다. 본 논문은 그레이 레이블링 기법과 퍼지 추론 방법을 이용하여 새롭게 사용되고 있는 흰색 번호판을 추출하기 위 한 방법을 제안한다. 먼저 비재귀 Flood-filling 알고리즘을 개선한 그레이 레이블링(labeling) 기법으로 번호판 후보 영역을 추출한다. 추출된 레이블에 대한 적합도를 퍼지 추론 시스템에 의해 산출한 후 후보 레이블 중에서 가장 적합도가 높은 레이블 영역을 최종 번호판 영역으로 추출한다. 실내외 주차장 및 거리에서 핸드폰 및 디지털 카메라로 획득한 다양한 자동차 번호판 영상을 대상으로 실험한 결과 94%의 추출 성공율을 나타내었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.489-493
• /
• 2005

TFT-LCD(Thin Film Transistor Liquid Crystal Display) module is representative commercial product of FPD(Flat Panel Display). Thickness of TFT-LCD module is very thin. It is adopted for major display unit for IT devices such as Cellular Phone, Camcorder, Digital camera and etc. Due to the harsh user environment of mobile IT devices, it requires complicated structure and tight assembly. And user requirements for the mechanical functionalities of TFT-LCD module become more strict. However, TFT-LCD module is normally weak to high level transient mechanical shock. Since it uses thin crystallized panel. Therefore, anti-shock performance is classified as one of the most important design specifications. Traditionally, the product reliability against mechanical shock is confirmed by empirical method in the design-prototype-drop/impact testredesign paradigm. The method is time-consuming and expensive process. It lacks scientific insight and quantitative evaluation. In this article, a systematic design evaluation of TFT-LCD module for mobile IT devices is presented with combinations of FEA and testing to support the optimal shock proof display design procedure.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.201-205
• /
• 2007

본 논문은 휴대폰의 무선 인터넷 플랫폼 어플리케이션을 통해 화재 및 가스누출 등 각종 위험을 통보해 주는 지능형 홈서비스 로봇을 구현하였다. 지능형 홈서비스 로봇은 세 가지 구성요소(로봇부, 미들웨어부, 모바일부)로 이루어진다. 로봇부는 가스센서, 불꽃 감지센서, 연기 센서, 초음파 센서, 모터, 카메라, 블루투스 모듈로 구성되며, 각종 위급 상항을 감지한다. 미들웨어부는 미들웨어 어플리케이션을 통해 로봇부와 모바일부를 연결하고, 로봇을 모니터링하며 SMS모듈을 이용하여 응급상황을 통지한다. 모바일부는 TCP/IP 프로토콜을 이용하여 미들웨어부와 통신하며 로봇에 각종 명령을 내려주고 행동을 제어한다. 제안된 방식은 Atmega128 프로세서를 통하여 로봇부의 각종 센서를 제어하며, 모바일부는 WIPI 플랫폼 기반으로 개발하였다. 로봇부와 미들웨어부는 가정에 설치되며 외부에서 모바일부를 통하여 제어된다.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.127-138
• /
• 2008

현대 사회에서 자동차는 생활에 필수적인 요소로 자리잡고 있으며, 현대 생활의 편의성을 제공하는 자동차의 증가로 인하여 그에 따른 교통사고 또한 매년 증가하고 있다. 교통사고의 주요 발생요인은 운전부주의로써, 이 중 특히 피로운전은 일반교통사고의 $10{\sim}20%$와 관련되어 있으며, 사물감지능력 저하 및 반응시간 지연으로 치명적 사고피해를 야기한다. 이에 본 연구는 운전 중 휴대전화 사용 및 피로상태의 운전상황이 운전수행에 어떠한 결과를 미치는지 알아보고자 실시간 영상처리 방법을 이용하여 실험을 진행하였다. 실험을 진행하기 위하여 차량 시뮬레이터를 이용하였으며, 운전자의 눈꺼풀 움직임 추적방식에 대한 실험을 진행하기 위하여 Seeing Machines의 faceLAB 4.5를 차량 시뮬레이터의 전면부에 장착하여 운전자 눈꺼풀 상태를 정상상태와 피로상태로 나누어 비교 분석하였다.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.115-120
• /
• 2005

As a popularity of a portable digital device such as a cellular phone, a digital camera and a MP3 player is spreading, the demand of the mobile storage device increases rapidly. A bluray technology using 405nm laser diode and objective lens having high NA(Numerical Aperture), 0.85, satisfies a miniaturization and a high capacity which are the requirements of the portable device. To develop SFFOP(small form factor optical pickup), it is prerequisite to minimize the number of optical components and establish evaluation and assembly method of micro optical pickup system as well as mass production method of micro optical component. To minimize optical elements of optical pickup, there have been many researches to use P-HOE(Polarized Holographic Optical Element) due to its extremely small size and versatile function. However, P-HOE is handled and assembled very accurately in SFFOP. In this paper, static error signal detection method is developed for an alignment of P-HOE in SFFOP. Using developed static error signal detection method, P-HOE can be aligned very accurately with real time result of static error signals of pickup such as FES(focusing error signal) and TES(Tracking Error Signal). The developed static error signal detection method is verified by the evaluation of commercialized DVD Pickup. And finally. developed static error signal detection method is applied for the assembly of P-HOE in SFFOP system satisfies specification of BD(Blu-ray Disk).

• 정보저장시스템학회논문집
• /
• 제5권2호
• /
• pp.96-101
• /
• 2009

In recent years, the demand for portable digital devices such as cellular phone, digital camera, and MP3 player has been largely increased. To meet the requirements of such portable applications the information storage devices with smaller size, higher capacity, and lower power consumption are needed. A small form factor (SFF) HDD using a load/unload (L/UL) system is one of the appropriate alternatives to satisfy these requirements. Due to complexity of L/UL process and mechanism, it is required to investigate for better understanding the effects of design parameters. Among the various design parameters, flexible cable and friction force on the L/UL ramp become important to the dynamic characteristics of L/UL process as the system is miniaturized. The program for L/UL simulation which considers the effect of flexible cable and L/UL ramp is needed. Unfortunately, there is hardly any commercial program for the L/UL simulation except the Computer Mechanics Laboratory (CML) air bearing design program and the CML L/UL simulation code. Furthermore, the design parameters such as flexible cable and the L/UL ramp are not considered in the CML L/UL simulation code. So we embody the L/UL simulation considering flexible cable and an L/UL ramp by using the ANSYS/LS-DYNA. In this thesis, the effects of flexible cable and friction force on the dynamic characteristics and the performances of the L/UL process are studied. Numerical simulation and related experiments are carried out and compared each other.