• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.2
• /
• pp.130-135
• /
• 2005

In this papers, we made study for plastic chip antenna, the plastic is Foamex with the circle of PVC and its electric characteristics are dielectric constant 1.9, insulation intensity 112 KV/cm. The proposed antenna is same as the conventional antennas are usually constructed with ceramic chip, which are not fragile in nature and don't tend to break easily. Therefore the proposed antenna with its advantage is attractive for application in mobile antenna. In order to valid the proposed papers, it is implemented the antennas of four types and experimented. From the results, we conformed that the antennas are operated at the dual band which is cellular band and Korea-PCS band. And the gain of the antennas has about above -2 dB and the pattern is same as conventional antennas. From this papers, the realized antennas using Foamex material will be application for mobile phone antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.839-846
• /
• 2007

In this paper, the first attempt to design a novel structure of dual-band feedforward linear power amplifier(FFW LPA) was presented. Up to now, primary technical difficulty has been the extension of the conventional signal canceller to the dual-band operation. Therefore, we propose the design technique of the dual-band equal group delayed carrier canceller, the dual-band equal group delayed intermodulation distortion(IMD) canceller and the dual-band FFW LPA. The operation frequency bands of the implemented dual-band FFW LPA are digital cellular($f_0=880$ MHz) and IMT-2000($f_0=2.14$ GHz) band, which are separated about 1.26 GHz. With the high power amplifier of 120 W PEP for commercial base-station application, IMD cancellation loop shows 20.45 dB and 25.04 dB loop suppression at each band of operation for 100 MHz. From the adjacent channel leakage ratio(ACLR) measurement with CDMA IS-95A 4FA and WCDMA 4FA signal, we obtained 16.52 dB improvement at the average output power of 41.5 dBm for digital cellular band, and 18.59 dB improvement at the average output power of 40 dBm for IMT-2000 band simultaneously.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.959-966
• /
• 2006

This paper proposes a new concept about dual band predistortion linear power amplifier(PD LPA) using diplexer for digital cellular ($f_o$=880 MHz) and IMT-2000($f_o$=2,140 MHz) base stations. The diplexer is composed of low pass filter having defected ground structure(BGS) microstrip line and high pass filter having high-Q lumped capacitors and distributed elements. The proposed predistorter adopts a reflection type intermodulation signal generator with 3 dB hybrid coupler for good reflection characteristic. for a forward link one carrier CDMA IS-95A 1FA and WCDMA 1FA signal, the proposed dual band PD LPA shows the adjacent channel leakage ratio(ACLR) improvement about 10 dB and 9.36 dB for digital cellular and IMT-2000 band, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2615-2618
• /
• 2009

Double rectangular patch with 4-bridges is investigated for solution of IEEE 802.11b/g (2.4 GHz) and 802.11a (5.5 GHz). Rectangular patch for 5.5 GHz frequency band is printed on the PCB substrate and connected to another rectangular patch for 2.4 GHz frequency band with 4-bridges to obtain dual band operation in an antenna element. 4-bridges can modify the desired frequency band from its original frequency band by changing its width. Gain of 2.4 GHz patch is 5 dBi and 5.5 GHz patch is 3.7 dBi at ${\theta}=0^{\circ}$.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.45-48
• /
• 2000

In this paper, we designed bluetooth module using 2.4 GHz ISM band. Bluetooth is wireless networking solution that connects PDA, cellular phone, printer, PC, etc each other. We integrated digital and RF part in one module. As a result, we can make low power consumption module that enables long battery life. In addition, we enlarged maximum available range of our module from 10m to l00m. This module satisfies bluetooth specification 1.0.

• Journal of Environmental Science International
• /
• v.24 no.5
• /
• pp.601-613
• /
• 2015

On the study of the characteristics and life cycle of mesoscale convective band in type of airmass that occurred in the Honam area from June to September for only 4 years in the period of 2009~2012, 10 examples based on the amount of rainfall with AWS 24 hours/60 minutes rainfalls, Mt. Osung radar 1.5 km CAPPI/X-SECT images and KLAPS data for convective band with heavy rainfall event were selected. There were analyzed and classified by using the convective band with heavy rainfall occurred along the convergence line of sea wind in the form of individual multi-cellular cell and moving direction of convective band appeared in a variety of patterns; toward southwestern (2 cases), northeastern (4 cases), congesting (2 cases), and changing its moving direction (2 cases). The case study dated of the 17th Aug. 2012 was chosen and implemented by sequentially different evolution of its shape along the convergence line of sea wind cell and moving direction of convective band as equivalent potential temperatures at the lower layer have increased to the upper layer 500 hPa, that the individual cells were developed vertically and horizontally through their merger, but owing to divergence caused by weakened rainfall and descending air current, the growth of new cell was inhibited resulting in dissipation of convective cells.

• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.158-165
• /
• 1999

This paper studies interconnection of DCS1800 and GSM900 dual-band networks. Two types of interconnection config-urations for GSM services, non-overlap and overlap, are described. We propose analytic and simulation models to investigate the ben-efit of the overlap configuration. Our results explain how the radio channel capacities, the inter-system handoff failure rate, the origi-nating call traffic ratio and the offered loads affect the system per-formance. This study indicates that with appropriate overlap con-figuration, the GSM dual-band network can significantly improve the quality of cellular service.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.172-176
• /
• 2008

This paper presents a novel feeding structure of the triple-band internal antenna which covers CELLVLAR/DCS/US-PCS bands. The proposed antenna consists of a U-slot patch radiator with a shorting post connected with ground plane and symmetric feeding lines with respective a feeding and shorting posts on both faces of the fixed FR-4 substrate. Through the simulation and experimental results, the proposed antenna is confirmed to have the features of less interference with a human head/body, broad bandwidth, desirable radiation patterns and efficiency for triple-band applications.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.20-26
• /
• 2013

We propose PHY Frame Structure for M2M direct communications in licensed frequency band. Especially, the proposed PHY Frame Structure coexists in the same licensed frequency band as currently operating cellular systems. Recently, Machine to Machine (M2M) service markets, including SmartGrid, Mobile Health, and Smart Car, are being rapidly expanded. Supporting M2M services in a specific case can waste Radio Resource in cellular systems. For example, when two M2M terminals communicating to each other are closely located, direct communication is radio resource efficient. In this paper, we set the requirement of maintaining the existing PHY frame structure in cellular systems to meet the backward compatibility. Based on this backward compatibility requirement, PHY frame structure for M2M direct communications is developed while satisfying coexistence with current operating cellular system. The proposed PHY frame structure meets backward compatibility. Accordingly, it is expected that the proposed M2M frame structure is useful for its frequency resource efficiency.

• Microbiology and Biotechnology Letters
• /
• v.15 no.6
• /
• pp.425-429
• /
• 1987

The extra-cellular hemolysin from Bacillus thuringiensis subsp. israelensis was purified in the process of suiting with (NH$_4$)$_2$SO$_4$, Sephadex G-200 gel filtration, and DEAE-cellulose column chromatography. The purified hemolysin had molecular weight of approximately 47,000 dalton on SDS-polyacrylamide gel electrophoresis. The activity of purified hemolysin on human red blood cells was increased by thiol agents, but that was Inhibited by cholesterol, protease treatment, and metal salts such as CuSO$_4$, and FeSO$_4$, respectively.