• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.16-21
• /
• 2017

In this paper, the effect of battery-package shape of electric vehicle on the forced convection around a group of battery cells has been numerically investigated. Simulations for the two package shapes with straight/curved ducts have been conducted to examine the two design factors; the maximum temperature and the temperature deviation of a group of cells which influence the cell durability. The simulation of the conjugate heat transfer has been simplified by employing an equivalent thermal conductivity of cell that consists of various materials. It has been found that the maximum temperature and the temperature deviation of curved duct were lower than those of straight duct. Velocity fields have also been examined to describe the temperature distribution of a group of cells and the position of maximum temperature was found to be related to the dead zone of flow field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1775-1777
• /
• 2005

In this paper, maximum output of three different temperature conditions of the photovoltaic modules have been tested and compared to obtain the optimum conditions for the maximum power operation. Temperatures of the cell and module have been set to $20^{\circ}C$, $25^{\circ}C$ and $30^{circ}C$ under the constant light intensity of 1kW/$m^2$. 125${\times}$125mm 36 single crystal solar cells having 80 [W] each have been serially connected in the module. From the results, maximum output deviation of 4.67% has been obtained under the ceil temperature of $20^{\circ}C$ and module temperature of $30^{\circ}C$ while minimum deviation of 0.41${\sim}$0.92% has been measured under the same temperatures of cell and module. Therefore it has been found that the temperature of both cell and module should be fixed to $25^{\circ}C$ to obtain stable data unless the temperature coefficient should be compensated for the testing sample.

• Journal of electromagnetic engineering and science
• /
• 제13권3호
• /
• pp.151-157
• /
• 2013

Marine radars are affected by sea and rain clutters, which can make target discrimination difficult. The clutter standard deviation and improvement factor are applied using multiple parameters-moving speed of radar, antenna speed, angle, etc. When a radar signal is processed, a Data Matrix Bank (DMB) filter can be applied to remove sea clutters. This filter allows detection of a target, and since it is not affected by changes in adjacent clutters resulting from a multi- target signal, sea state clutters can be removed. In this paper, we study the level for clutter removal and the method for target detection. In addition, we design a signal processing algorithm for marine radars, analyze the performance of the DMB filter algorithm, and provide a DMB filter algorithm design. We also perform a DMB filter algorithm analysis and simulation, and then apply this to the DMB filter and cell-average constant false alarm rate design to show comparative results.

• KSBB Journal
• /
• 제7권1호
• /
• pp.45-50
• /
• 1992

항체 유도 염증 반응인 항체 매개형 과민 반응과 지연형 과민 반응은 족척 두께가 다당류에 의해 거의 정상 수준까지 회복되었다. anilline으로 유도한 methemoglobin의 함량도 거의 차이가 없었다. PFC/spleen cell과 PEC/$10^5$ slpeen cell의 경우 다소 증가를 나타내었으나, PEC는 뚜렷한 증가나 감소를 나타내지 않았으며, 적혈구 응집소가는 다소 증가하였으나 적혈구 용혈소가는 거의 차이가 없었다. 마우스의 plasma corticosterone의 농도는 사육실 및 다당류 투여에 따른 stress요소는 거의 없었다.

• KSBB Journal
• /
• 제6권3호
• /
• pp.299-307
• /
• 1991

In this paper the effect of light on non-aerated Baker's Yeast(Saccharomyces cereuisiae) production and the protein excretion to the extracellular fluid is studied. Previous results in our laboratory indicate that at pH=5 and T-32$^{\circ}C$ yeast may be affected by light, but those differences seem to be within statistical variation of the data. In this paper, cell and extracellular protein concentrations along with redox potential are monitored for batch fermentations in the presence and absence of light at pH levels of 3 and 5 and at 31$^{\circ}C$, in order to explore whether possible light effects can be more readily discerned at lower pH values. Yeast particle size distributions are also determined over the course of fermentation using a particle counter in order to add one more measuring tool to our usual cell and total protein measurements. An apparently noticeable difference in the redox potential is observed between the light and the dark runs for early times for the pH=3 runs. The particle size distributions show differences in the particle diameters between light and dark runs at pH=3, but those differences fall within one standard deviation of the mean particle diameters.

• 한국수소및신에너지학회논문집
• /
• 제23권3호
• /
• pp.243-249
• /
• 2012

A lightweight 200W direct methanol fuel cell (DMFC) stack is designed and fabricated to power a small scale Unmanned Aerial Vehicle (UAV). The DMFC stack consists of 33-cells in which membrane-electrode assemblies (MEAs) having an active area of 88 $cm^2$ are sandwiched with lightweight composite bipolar plates. The total stack weight is around 3.485 kg and stack performance is tested under various methanol feed concentrations. The DMFC stack delivers a maximum power of 248 W at 13.2 V and $71.3^{\circ}C$ under methanol feed concentration of 1.2 M. In addition, the voltage of individual cell in the 33-cell stack is measured at various current levels to ensure the stability of DMFC stack operations. The cell voltage distribution data exhibit the maximum cell voltage deviation of 28 mV at 15 A and hence the uniformity of cell voltages is acceptable. These results clearly demonstrate that DMFC technology becomes a potential candidate for small-scale UAV applications.

• 한국미생물·생명공학회지
• /
• 제17권3호
• /
• pp.173-177
• /
• 1989

HeLa 세포주의 연속 배양시 세포수가 배지의 이동속도가 증가함에 따라 감소하는 현상을 나타냈으며, 최대 세포수를 유지할 때의 dilution rate은 0.012(1/h)로 wash-out인 0.050(1/h)보다 극히 낮으며, dilution rate이 0.030(1/h)일 때 2.0(mL of cells/L/h)의 최대 세포 생산속도를 보였다. 또한 낮은 배지 이동속도에서 세포수의 감소에 따른 maintenance term의 존재를 확인했다. 더불어 packed cell volume파 산소소비속도의 측정값이 실제 세포증식과 밀접한 관계가 있음이 입증되어 간접방법에 의한 생육도치 측정이 가능하게 되었다. 또한 산소 yield model에 의해 최대 산소 수율, $Y_{O2}^{max}$과 maintenance 산소소비속도, m$_{O2}$가 각각 4.1$\times$$10^5$(cells/mmole $O_2$)와 10.71$\times$$10^{-9}$(mmole $O_2$/ cells/h)로 측정되었다.

• 청정기술
• /
• 제7권4호
• /
• pp.243-250
• /
• 2001

연료전지는 환경 친화적 대체에너지로 지속적인 연구가 이루어지고 있다. 최근에는 연료전지의 실용화를 위해 적층, 대면적화에 대한 기본 기술이 중요시되고 있다. 그러나 연료전지중 가장 많은 기술적 발전을 이룬 인산형 연료전지에 관해서도 연료전지 설계의 기초자료가 되는 스택의 온도 분포에 대한 연구는 거의 발표되지 않았다. 본 연구에서는 인산형 연료전지 스택의 온도 분포를 전산모사하였다. 이를 통하여 여러 작동 조건에서 스택의 온도 분포를 알아내었으며, 스택 운전시 적절한 온도 측정 위치를 예측할 수 있었다. 또한 냉각단의 유로를 변경하여 전산모사를 수행한 결과 스택 내부의 온도 분포의 표준 편차를 약 50% 감소시키는 효과적인 냉각 디자인을 제안할 수 있었다.

• 한국임상수의학회지
• /
• 제36권2호
• /
• pp.109-111
• /
• 2019

A dog with anorexia, cough, and regurgitation was referred to clinic. Diagnostic imaging revealed a solitary mass involving the right cranial and middle lung lobes, compression of the cranial vena cava, and deviation of the heart and mediastinum toward the left side because the mass. The mass was diagnosed as a squamous cell carcinoma via fine needle aspiration. Ten days later, the tumor was larger and the clinical signs were more severe. A combination of piroxicam and itraconazole was administered to control the mass. Two weeks after initiating this treatment, the tumor size decreased and the clinical signs improved significantly.

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.64-69
• /
• 2023

This paper explores the impact of gate shape changes on the size and density of foamed cells in microcellular foam injection molding. Five different gate shapes were examined while varying the amount of nitrogen gas(N2) injected for foaming. Analysis of the results showed that while average values did not change significantly, deviation values decreased by approximately 65% for cell size and 56% for density when 3.5wt% of nitrogen gas was injected in the film gate. Further analysis was conducted to verify this phenomenon, revealing that the contact area between the gate and product had the greatest impact. Our findings indicate that to ensure uniform generation of foamed cells in microcellular foaming product design, a gate with a wide contact area should be secured.