• Anatomy and Cell Biology
• /
• v.56 no.4
• /
• pp.409-414
• /
• 2023

Botulinum neurotoxin (BoNT) injection for the treating plunged nose, post-rhinopasty and hyaluronic filler migration is common procedures in clinical settings. However, the lack of thorough anatomical understanding makes it difficult to locate the nose region muscles. The anatomical considerations concerned with BoNT injection into the nasalis, levator labii superioris alaeque, and depressor septi nasi muscles were reviewed in this study. The injection spots have been presented for the nasalis, levator labii superioris alaeque, and depressor septi nasi muscles, with the recommended injection technique for each muscle. We have suggested the ideal injection sites in association with outer anatomical landmarks of the nose region. Moreover, these proposals would support a more accurate procedure of BoNT injection in relieving plunged nose, preventing post-rhinoplasty deviation, and migration of the hyaluronic acid filler.

• Journal of Periodontal and Implant Science
• /
• v.31 no.4
• /
• pp.661-668
• /
• 2001

Anti-P. gingivalis immune sera were obtained from mice immunized with either P. gingivalis alone, or F. nucleaturm followed by P. gingivalis. Two groups of immune sera were examined for binding capacity to P. gingivalis biofilm by confocal laser scanning microscope, Antibody avidity index was also determined for each immune sera. The results indicated that prior immunization of mice with F. nucleaturm impaired P. gingivalis-specific immune sera in binding capacity to biofilm and antibody avidity to P. gingivalis. Elevated antibody responses in patients with destructive periodontal disease has often been related to suboptimal level of protective antibody $(opsonophagocytosis)^{1-3)}$ while post-immune sera obtained with experimental animals using a single periodontal pathogen demonstrated satisfactory levels of protective function against the homologous bacterial $challenge^{4,5)}$.The reason is unclear why elevated IgG responses in periodontal patients to periodontal pathogens do not necessarily reflect their protective function. Such an immune deviation might be derived from the fact that destructive periodontal disease is cumulative result of immunopathologic processes responding to an array of different colonizing microorganisms sequentially infecting in the subgingival environmental niche. Fusobacterium nucleaturm is one of the key pathogens in gingivitis, in the transitional phase of conversion of gingivitis into destructive periodontitk, and in adult $periodontitis^{6-8)}$. It also plays a central role in coaggregation with other important microbial species in subgingival $area^{6,9,10)}$ as well as in $biofilm^{11)}$, especially with Porphyromonas gingjvalis in synergism of virulence in human periodontal disease or in animal $models^{12-14)}$. This organism has also been reported to have immune modulating activity for secondary immune response to Actinobacillus $actinomycetemcomitans^{15)}$. It is presumed that sequential colonization and intermicrobial coaggregation between intermediate and late colonizers could potentially modulate the immune responses and development of specific T cell phenotypes in periodontal lesions. We have recently demonstrated the skewed polarization of P. gingivalis-specific helper T cell clones in mice immunized with F. nucleaturm followed by P. $gingivalis.^{16)}$. Consequently F. nucleaturm may initially prime the immune cells and modify their responses to the successive organism, P. gingivalis. This could explain why one frequently observes non-protective serum antibodies to P. gingivalis in periodontal patients in contrast with those obtained from animals that were immunized with $P.gingivalis\;alone^{17)}$. The present study was performed to investigate the immune modulating effect of F. nucleatum on serum binding to experimental biofilms and the avidity of anti-P. gingivalis antibody.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.49-56
• /
• 2017

Curling sweeping is one of important motion to control the position of the curling stone, and sweeping speed and applied force to the broom pad are major research subjects. In this study, a device was developed to measure the force applied to the curling broom pad in curling sweeping motion, and two load cells were mounted between the broom pad and pad holder. Analog signals generated from the load cells were sampled about 300 times per second using a micro controller, and then converted to 10-bit digital signals. Calibration of the load cell and set up of regression equations to convert the measured electrical signals into mass (force) was done by three M1 class weights, and the developed system was designed as wearable device to minimize increasing of total weight of the broom. Same force was applied to the developed system and a force plate that was using as a reference force measurement system in field of sports, and the difference between the measured values were showed about $0.909{\pm}1.375N$(mean and standard deviation). The developed system could be applied other kinds of study which required force measurement function similar to sweeping motion.

• Korean Journal of Remote Sensing
• /
• v.15 no.1
• /
• pp.9-20
• /
• 1999

The use of climatic information is essential in the industial society. More specialized weather servies are required to perform better industrial acivities including agriculture. Especially, crop models require daily weather data of crop growing area or cropping zones, where routine weather observations are rare. Estimates of the spatial distribution of daily climates might complement the low density of standard weather observation stations. This study was conducted to estimate the spatial distribution of daily minimum and maximum temperatures in Korean Peninsula. A topoclimatological technique was first applied to produce reasonable estimates of monthly climatic normals based on 1km $\times$ 1km grid cell over study area. Harmonic analysis method was then adopted to convert the monthly climatic normals into daily climatic normals. The daily temperatures for each grid cell were derived from a spatial interpolation procedure based on inverse-distance weighting of the observed deviation from the climatic normals at the nearest 4 standard weather stations. Data collected from more than 300 automatic weather systems were then used to validate the final estimates on several dates in 1997. Final step to confirm accuracy of the estimated temperature fields was comparing the distribution pattern with the brightness temperature fields derived from NOAA/AVHRR. Results show that differences between the estimated and the observed temperatures at 20 randomly selected automatic weather systems(AWS) range from -3.$0^{\circ}C$ to + 2.5$^{\circ}C$ in daily maximum, and from -1.8$^{\circ}C$ to + 2.2$^{\circ}C$ in daily minimum temperature. The estimation errors, RMSE, calculated from the data collected at about 300 AWS range from $1.5^{\circ}C$ to 2.5$^{\circ}C$ for daily maximum/minimum temperatures.

• Journal of Convergence for Information Technology
• /
• v.9 no.6
• /
• pp.1-6
• /
• 2019

In this study, the development of a weight estimation model of electronic scale with nonlinear characteristics is presented using polynomial regression analysis. The output voltage of the load cell was measured directly using the reference mass. And a polynomial regression model was obtained using the matrix and curve fitting function of MS Office Excel. The weight was measured in 100g units using a load cell electronic scale measuring up to 5kg and the polynomial regression model was obtained. The error was calculated for simple($1^{st}$), $2^{nd}$ and $3^{rd}$ order polynomial regression. To analyze the suitability of the regression function for each model, the coefficient of determination was presented to indicate the correlation between the estimated mass and the measured data. Using the third order polynomial model proposed here, a very accurate model was obtained with a standard deviation of 10g and the determinant coefficient of 1.0. Based on the theory of multi regression model presented here, it can be used in various statistical researches such as weather forecast, new drug development and economic indicators analysis using logistic regression analysis, which has been widely used in artificial intelligence fields.

• Korean Journal of Veterinary Research
• /
• v.14 no.2
• /
• pp.179-184
• /
• 1974

The blood picture of 85 healthy race horses in Korea was investigated. The ranges and mean values of erythrocyte, hemoglobin, hematocrit value, mean corpuscular volume, mean corpuscular hemoglobin concentration, and total white blood cell count in the blood picture were determine. The respective mean value and standard deviation and age differences were as follows: 1. The erythrobyte count was shown as range of 6.20 to $11.32{\times}10^6/mm^3$ with mean of $8.61{\pm}1.92{\times}10^6/mm^3$(SD). The leucocyte count was shown as range 5.0 to $18.0{\times}10^3/mm^3$ with mean of $8.25{\pm}1.51{\times}10^3/mm^3$(SD). There were not significant. differences in age, 2. The mean value of hemoglobin was shown $13.9{\pm}1.7g/100ml(SD)$ ranging 9.8 to 16.8g/100ml. The mean value of hematocrit was shown $40.9{\pm}3.94ml/100ml(SD)$ ranging 26 to 54. There were not significant differences in age. 3. The mean corpuscular hemoglobin was shown as range of 11.8 to 22.2pg with mean of $16.9{\pm}4.69$(SD). The mean corpuscular volume was shown as range of 34.5 to $71.3cu{\mu}$ with mean of $49.0{\pm}7.32cu{\mu}$(SD). The mean corpuscular hemoglobin concentration was shown as range of 30.6 to 39.4 g/100 ml with mean of $34.6{\pm}2.36$(SD). There were not significant differences in age. 4. The correlation among erythrocyte count, hemoglobin and hematocrit value were observed as follows: Erythrocyte count and hemoglobin (+0.328), rythrocyte count and hematocrit vague (+0.319). A linear regression equation was shown as follows: Erythrocyte count and hemoglobin (Y=0.336x+10.977), erythrocyte count and hematocrit value (Y=0.655x+35.274). 5. The high correlation between hemoglobin and hematocrit vague was observed (r= +0.836). A linear regression equation was shown: (Y=1.948x+13.895).

• YAKHAK HOEJI
• /
• v.42 no.5
• /
• pp.473-479
• /
• 1998

Lovastatin (LOVA), a fungal metabolite isolated from cultures of Aspergillus terreus, is a competitive HMG-CoA reductase inhibitor used for the treatment of primary hyper cholesterolemia, and has also been shown to suppress growth in a variety of non-glioma tumor cell lines. A sensitive reversed-phase high-perfonnance liquid chromatographic method with ultraviolet (UV) absorbance detection has been developed to quantitate LOVA in human plasma and urine samples using liquid-liquid extraction procedure. Baseline separation of LOVA and internal standard, simvastatin was achieved on a Novapak $C_{18}$ analytical column with a mobile phase containing 0.025M $NaH_2PO_4$: CAN (35:65, v/v%), adjusted pH to 4.5. The flow rate was set at 1.5ml/min, and the column effluent was monitored by a UV detection at 238nm. The limit of quantification was determined to be 0.5${\mu}$g/ml while extraction efficiency of LOVA ranged from 73.4-82.9% at LOVA concentrations of 0.5 to 10${\mu}$g/ml. Good linearity with correlation coefficients greater than 0.999 was obtained in the range of LOVA concentrations from 0.5 to 10${\mu}$g/ml. The accuracy and the precision were proven excellent with relative standard deviation (RSD, %) and relative error (RE, %) of less than 4.2 and 4.0, respectively. Intraday precision, evaluated at five LOVA concentrations (0.5, 1, 2, 5, 10${\mu}$g/ml) and expressed as RSD ranged from 0-1.82% while the interday precision at the same concentrations ranged from 0.7-10.5%. The analytical method described was then successfully employed for the determination of LOVA concentrations in plasma samples obtained during a phase II clinical trial using high doses of LOVA (30-40mg/kg/day). This method could be further utilized for the ongoing pharmacolkinetic studies and therapeutic drug monitoring of the high-dose LOVA therapy in adenocarcinoma patients.

• IMMUNE NETWORK
• /
• v.3 no.1
• /
• pp.61-68
• /
• 2003

Background: Fibroblast functions both as a structural element and as a vital immunoregulatory cell. Fibroblasts regulate inflammation through governing of chemokine expression. In order to elucidate the mechanisms by which the expressions of chemokines were regulated, the co-stimulatory effects of Th1 and proinflammatory cytokines were compared using nasal mucosal fibroblasts. Methods: Human nasal mucosa was obtained from surgery for septal deviation and the growth of fibroblasts was established. Fibroblasts from 4th to 6th passage were stimulated with various combinations of cytokines. To inhibit selected signaling pathways, fibroblasts were pretreated with cyclosporin A, wortmannin, staurosporine, and dexamethasone prior to the stimulation with cytokines. The supernatants were collected and chemokines were detected with a sandwich enzyme-linked immunosorbent assay. Results: $TNF-{\alpha}/IFN-{\gamma}$-induced production of RANTES was inhibited by all inhibitors used. MCP-1 was produced constitutively and $TNF-{\alpha}$-induced or $TNF-{\alpha}/IFN-{\gamma}$-induced production of MCP-1 was not inhibited by cyclosporin A or wortmannin, but by stauroporine or dexamethasone. All inhibitors used in this experiment inhibited $TNF-{\alpha}/IFN-{\gamma}$-induced or $IL-1{\beta}/IFN-{\gamma}$-induced production of MCP-2 in nasal mucosal fibroblasts. Although staurosporine or dexamethasone showed strong inhibitory effects, cyclosporin A or wortmannin did not inhibit the production of MCP-3 by $IL-1{\beta}/IFN-{\gamma}$ treatment. Conclusion: Chemokines were strongly induced by stimulation of cytokines in combination and showed different pattern of inhibition by the inhibitors. Therefore, it was assumed that cytokines acted on multiple pathways or on unknown pathways which converged to gene-specific transcription factors.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.1
• /
• pp.144-152
• /
• 1996

Recently, as the demands for radio spectrum are growing and the number of cell sites is increasing rapidly, the spectrum engineering plays an important role in estimating frequency sharing and reuse. The radio propagation analysis is essential in the basic technology of radio network design such as deciding the service area and selecting the position of the base station. But, domestic propagation environment in which mountainous region is occupying over 70% of our terrain does not allow us to apply foreign studies which are deduced in highly different environments. Therefore, we need to have our propagation analysis system derived from our own terrain condition. In this paper, we propose the propagation prediction model which issuitable toour propagation environment, and also usinghis model, we implement thesimulator based on GIS(Geographic Information System)which can be applied to both spectrum engineering and radio propagation analysis. We showed that this simulator can well be applied to frequency assignment, propagation network design as well as other radio services. Considering the results of our analysis, we could guarantee the standard deviation of error between the measured data and predicted results as 5 to 7 dB.

• Economic and Environmental Geology
• /
• v.21 no.3
• /
• pp.235-255
• /
• 1988

Talc deposit of pipe-like form occurrs in the lower part of the Hyangsanri Dolomite with a strike of N40 -50 E and a dip of 40 -50 NW which is one formation of the Ogcheon Super Croup. The pipi-like ore body plunge at about $40^{\circ}$ to the west and are parallel to the lineation developed in the area. Structural formulae of tales occurred in this deposit are close to the ieal composition $Mg_6Si_8O_{20}(OH)_4$ showing limited deviation from ideal one. Substitution of Al for Si in tetrahedral site is of little or nothing ranging 0-0.04 and octahedral occupancy is close to six ranging 5.88-5.98 atoms per unit cell. Predominant octahedaral cation is Mg and proportion of divalent cations is generally over 97percent. Calcite -dolomite thermometry is obtained by determining the mol % $MgCO_3$using of EPMA and XRD methods. The peak metamorphic temperature can be estimated at $470{\pm}30^{\circ}C$ in the area whereas carbonates occurred at near talc ore show lower temperature than $400^{\circ}C$ that the calcite solvus limit is not well established. It indicates that the talc deposit was formed at the lower temperature that the metamorphic temperature. Cosequently, the formation of talc by metamorphism is questionable and the alteratin zone developed around the talc ore is very limited. The occurrence of talc ore in the dolomite as well as mineralogy, calcite-dolomite geothermometry, chlorite geothermometry, field and microscopic evidence suggest that siliceous ascending hydrothermal solution along the fracture is responsible for the formation of talc. It was considered that the slight fracturing of dolomite was formed by deformation prior to the mineralization.