• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.185-192
• /
• 2011

This study deals with a basic proposal to prove the safety for the exhausted fittings of the hydrogen fuel cell vehicle. First, this study was approached to numerical analysis solving to close the exact boundary condition (Axial, Bending, Lateral) and the second, this study produced the Lateral movement equipment for the vibration. For the numerical analysis, This study was considered with the exact solution of Lateral movement and the resonance effect for durability sample according to fitting positions. The second, This study was made for special equipment for displacement/gas leak and the frequency because the domestic samples were comparing with foreign fitting and foreign fitting for the hydrogen fuel cell vehicle. The result of this study was satisfied with domestic fittings for the basic reference but it need more test because of other situation for hydrogen fuel cell vehicle.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.132-132
• /
• 2009

To achieve the commercialization of PEM fuel cell, the durability problem must be solved. Recently, many researchers have focused on this durability problem and degradation studies about membrane and electrode have been reported. But durability characteristics of gas diffusion layer is not much reported yet. Durability of GDL is very important to maintain the performance of PEM fuel cell because the main function of GDL is a path of fuel and water and the GDL degradation causes the loss of the GDL function. In this study, the degradation of GDL, especially, the mechanical degradation process was investigated with the leaching test. The effect of water dissolution was observed through the test and the amount of GDL degradation was measured with various measurement methods such as weight measurement, static contact angle measurement, scanning electron microscope. After 2,000 hours test, the GDL showed structural damage and loss of hydrophobicity.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.239-244
• /
• 2011

In this paper, we analyzed the electrical characteristics with crack pattern in crystalline solar cell. crystalline solar cells with a thin substrate, even small shocks can be easily damaged. Before the module goes through many processes, because the solar cells are at risk of a crack. That occurred early in the PV module micro-crack is not easily detection by eye test or output test. Because the EL (Electroluminescence) device has been detected using. PV module is made by laminated of a variety of materials. By different properties of each material will affect the crack. For this reason, the crack will grow and affect the output. And We analyzed the three crack patterns in crystalline solar cell. A growth of cracks on crystalline solar cell was interpreted by analysing generated cracks on the PV modules. Based on this interpretation, an electrical output value was calculated by mathematical modeling on electrical output characteristic with each crack patterns.

• Korean Journal of Veterinary Research
• /
• v.30 no.2
• /
• pp.187-192
• /
• 1990

The Presence and quantity of protein A in Staphylococcus hyicus subsp hyicus isolates from pigs were determined by indirect hemagglutination test and enzyme-linked immunosorbent assay(ELISA). Cell-bound and extracellular protein A was demonstrated in 87.7% and 36.0% of 489 isolates, respectively, by indirect hemagglutination test. When contents of the protein A were estimated by ELISA method, all of the isolates that were positive to protein A in indirect hemagglutination test produced extracellular protein A of less than 1ng/ml. Most of the isolates produced cell-bound protein A of less than 1ng/ml, whereas 28 isolates produced 1 to 35ng/ml and 11 isolates produced 25 to 108ng/ml.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.21 no.1
• /
• pp.70-82
• /
• 2008

Objective : The purpose of this study is to examine the effects of Baickbujasan(BB) on the skin damage and depigmentation. Method : The inhibition of tyrosinase activity, melanogenesis and cell viability in cultured B16 melanoma cells were measured. In order to test effects of reduction of melanogenesis, B16 F-10 mouse melanoma stem line was employed to extract melanin from cultured cell, where BB was added or not, and was dissolved in alkali for colorimetric analysis. Also, in order to test skin alteration in C57BL/6 after UV irradiation, the animals were grouped into a UV urradiation group and UV irradiation after BB application group. Dopa oxidase tissue staining was excuted to invesitage the change in the distribution of active melanin cell. The distribution of active melanin cell in inner skin of iNOS after damage from UVB irradiation and the manifestation condition of P53 which takes part in natural death of keratinocyte were examined. Result : The results indicate that BB has significant effects on tyrosinase activity, and melanogenesis in vivo test. BB seems to reduce C57BL/6, external dermatological damage, for instance, erythematous papule, eczema, loss of keratinocyte, reduction in pus, and relieves dermatological damages. Conclusion : BB can be applied externally for UV protection and depigmentation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.188-195
• /
• 2002

This paper statistically verifies two correlation algorithms by comparing the data of GTEM cell to those of semi-anechoic chamber (SAC). Correlation algorithms considered in this paper are 3 and 15 position methods, which simulate the EMI test for an equipment under test (EUT) over the ground plane by using the radiated power from EUT located within GTEM cell. Also, the results obtained by two algorithms are compared with the theoretical values calculated from an ideal dipole model. From the results, it was found that the data obtained by two correlation algorithms and SAC have a strong correlation. In addition, the EMI data by 3 position method showed higher than those by 15 position method and SAC measurements.

• Imaging Science in Dentistry
• /
• v.49 no.2
• /
• pp.103-113
• /
• 2019

Purpose: Anatomical variations of the external nasal wall are highly important, since they play a role in obstruction or drainage of the ostiomeatal complex and ventilation and can consequently elevate the risk of pathological sinus conditions. This study aimed to assess anatomical variations of the nasal cavity and ethmoidal sinuses and their correlations on cone-beam computed tomography (CBCT) scans. Materials and Methods: This cross-sectional study evaluated CBCT scans of 250 patients, including 107 males and 143 females, to determine the prevalence of anatomical variations of the nasal cavity and ethmoidal sinuses. All images were taken using a New Tom 3G scanner. Data were analyzed using the chi-square test, Kruskal-Wallis test, and the Mann-Whitney test. Results: The most common anatomical variations were found to be nasal septal deviation (90.4%), agger nasi air cell (53.6%), superior orbital cell(47.6%), pneumatized nasal septum(40%), and Onodi air cell(37.2%). Correlations were found between nasal septal deviation and the presence of a pneumatized nasal septum, nasal spur, and Haller cell. No significant associations were noted between the age or sex of patients and the presence of anatomical variations (P>0.05). Conclusion: Radiologists and surgeons must pay close attention to the anatomical variations of the sinonasal region in the preoperative assessment to prevent perioperative complications.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1E
• /
• pp.14-19
• /
• 2001

We have proposed BIST method and circuit for embedded 16M SDRAM with logic. It can test the AC parameter of embedded 16M SDRAM using the BIST circuit capable of detecting the address of a fail cell installed in an Merged Memory with Logic(MML). It generates the information of repair for redundancy circuit. The function and AC parameter of the embedded memory can also be tested using the proposed BIST method. It is possible to test the embedded SDRAM without external test pin. The total gate of the BIST circuit is approximately 4,500 in the case of synthesizing by 0.25μm cell library and is verified by Verilog simulation. The test time of each one AC parameter is about 200ms using 2Y-March 14n algorithm.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.1
• /
• pp.108-117
• /
• 1995

The primary purpose of this extensive test effort was to observe real-time operational performance characteristics associated with automotive grade fuel utilized by piston engine powered light aviation aircraft. In fulfillment of this effort, baseline engine operations were established with 100LL aviation grade fuel followed by four blends of automotive grade fuel. A comprehensive sea-level-static test cell/flight test data collection and evaluation effort were conducted to review operational characteristics of a carbureted light aircraft piston engine as related to fuel volatility, fuel temperature, and fuel system pressure. Presented herein are results, data, and conclusions drawn from test cell engine operation as well as flight test operation on 100LL aviation grade and four blends of automotive grade fuel.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1995.04a
• /
• pp.123-123
• /
• 1995

To evaluate the genetic toxicity of NP-77A which is selected as the candidate of anti-HBV agent, we performed ames test, micronucleus test, and chromosome aberration test on the CHL cell in vitro. The Ames test was carried out with 5 fold diluted 5 concentrations from 25mg/plate using S. typhimurium and E.coli. After 48hrs incubation, revertant colony numbers was calculated with and without metabolic activation system. In vivo micronucleus test, we investigated the rate of the occurrence of micronucleus after I.P. administration to mice. Andalso, we observed the incidence rate of cells with chromosomal aberration by NP-77A treatment using CHL cell line.