• Korean Journal of Veterinary Service
• /
• v.18 no.3
• /
• pp.1-12
• /
• 1995

To investigate effect of seeding on post-thaw motility and viability of canine spermatozoa, the semen from male dogs which had been proved to be fertile in the past were frozen and seeded during freezing process. Post-thaw motility and viability of canine sperm which were frozen and seeded were investigated according to different seeding temperatures of $-5^{\circ}C$, $-10^{\circ}C$, or $-l5^{\circ}C$ and also according to different concentration of glycerol of 2%, 5% and 10%. In addition, post-thaw motility of canine sperm frozen by direct freezing in a deep freezer or programmed freezing in a programmed cell freezer was investigated. Post-thaw motility of canine sperm was compared according to different seeding temperatures : The sperm seeded at $-5^{\circ}C$ showed considerably higher post-thaw motility than that of non-seeding, and that seeded at $-10^{\circ}C$, or $-l5^{\circ}C$, respectively, in 2% and 5% glycerol groups on both 2 and 7day after freezing(p<0.05). In 10% concentration of glycerol, the sperm seeded at each seeding temperature showed considerably higher post-thaw motility than that of non-seeding group on day 7 after freezing(p<0.01). Post-thaw viability of canine sperm was compared according to different seeding temperatures : The sperm seeded at $-5^{\circ}$ showed significantly higher post-thaw motility than that of non-seeding, and that seeded at $-10^{\circ}C$, or $-l5^{\circ}C$, in 5% and 10% glycerol groups on day 7 after freezing(p< 0.05). In comparison of post-thaw motility of canine sperm seeded according to different concentration of glycerol, 5% glycerol group and 10% glycerol group showed considerably higher post-thaw motility than 2% glycerol group without difference between those two groups in all seeding temperatures($-5^{\circ}C$, $-10^{\circ}C$ and $-l5^{\circ}C$) on day 2 and 7 after freezing(p<0.01). In comparison of post-thaw viability of canine sperm seeded according to different concentration of glycerol, 5% glycerol group and 10% glycerol group showed the same considerably higher post-thaw viability than 2% glycerol group on each thawing day(p<0.01). The canine sperm frozen and seeded by programmed freezing method showed considerably higher post-thaw motility than that frozen by direct freezing method in all different seeding temperatures($-5^{\circ}C$, $-10^{\circ}C$ and $-l5^{\circ}$). These results indicated that the higher post-thaw motility and viability was obtained in the spermatozoa seeded than that of non-seeding, that among different seeding temperatures of $-5^{\circ}C$, $-10^{\circ}C$ and $-l5^{\circ}C$, the sperm seeded at $-5^{\circ}C$ showed higher post-thaw motility and viability than the other temperatures, also among different concentrations fof glycerol of 2%, 5% and 10%, the sperm frozen and seeded in 5% and 10% concentration of glycerol showed higher post-thaw motility and viability than that in 2% of glycerol, and that the sperm frozen and seeded by programmed freezing method showed higher motility than that by direct freezing method.

• Food Science and Preservation
• /
• v.18 no.1
• /
• pp.1-6
• /
• 2011

Kochujang-gulbi, a Korean traditional food, was prepared with kochujang and freeze-dried gulbi slices. Kochujang-gulbi was treated with high hydrostatic pressure (200, 400 and 600 MPa) and gamma-irradiation (7, 10, 20 and 30 KGy) to improve its quality and shelf-life. The pH of high hydrostatic pressure and gamma-irradiation treated kochujang-gulbi samples did not significantly different compared to that of control. However, Hunter L value slightly increased, and Hunter a and b values decreased by high hydrostatic pressure and gamma-irradiation treatment. During storage, the pH and color of high hydrostatic pressure and gamma-irradiation treated kochujang-gulbi samples did not significantly changed. The VBN and TBA level decreased by the increase treatment of high hydrostatic pressure and then slowely increased during storage. The VBN and TBA level of kochujang-gulbi samples treated by the strong gamma ray emission slowely increased during storage. In particular, gamma-irradiation treatment was very effective to sterilize microorganisms when compared to that of high hydrostatic pressure in kochujang-gulbi products. In addition, the high hydrostatic pressure and gamma-irradiation treated kochujang-gulbi samples shown significantly lower total viable cell number than control for the 20 days of storage at room temperature with retort pouch packaging.

• Korean Journal of Microbiology
• /
• v.32 no.1
• /
• pp.47-52
• /
• 1994

The cells of Campylobacter jejuni heat-shocked at 48${\circ}C$ for 30 min synthesized the heat shock proteins of HSP90, HSP66 and HSP60. Those heat shock proteins were found to correspond to the heat shock proteins of HSP87, HSP66 (DnaK), and HSP58 (GroEL) of E. coli, respectively. By Southern blot analysis of the chromosomal DNAs of C. jejuni with groESL and dnaK genes of E. coli as DNA probes, the heat shock genes of C. jejuni which are homologous to the E. coli groESL and dnaK genes were found to exist in the chromosomal DNA. The genomic libraries of C. jejuni were constructed with the cosmid vector pWE15 and the groEL gene of C. jejuni were cloned in E. coli B178 groEL44 temperature senstive mutant. The hybrid plasmid (pLC1) was inserted with the DNA fragment (about 5.7kb in size) containing the groEL gene. E. coli groEL44 mutant cell transformed with the pLC1 could grow at 42${\circ}C$ by synthesizing the HSP60 of C. jejuni and regained the susceptibility to the ${\lambda}$ vir phage by expression of the groEL gene in the cloned cells. These indicated that the groEL products of C. jejuni had chaperon effects by synthesizing the heat shock proteins in the cloned cells of E. coli.

• The Korea Journal of Herbology
• /
• v.21 no.2
• /
• pp.109-119
• /
• 2006

Objectives : This study was performed to approach of properties-flavours theory and the study of morphological standard in CORNI FRUCTUS. Methods : The properties-flavours theory were attempted with bibliographic method and various climate-information. The external-internal morphological standards were determined by using stereoscope and butanol series. Results and conclusion : 1. The significant analysis for the corni fructus as the properties-flavours theory, is a follow-up survey of the effect written in the official oriental medicine book. 2. The other analytic methods according to the gathering time, processing or storing system or especially nature or growth environment(altitude, temperature,. the mean moisture, and the agronomical survey) by way of the explanation of properties-flavours theory appears so many insufficiency at the many cases. 3. The external and internal characteristics according to the shape of original plant or herbal states, entirely correspond to all the literature on this subject. 4. According to the place of production, there are some different points. (l) In the external shapes, it is reasonable that if we make the basic standard of classification by the sharpness of color, the existence of gloss and the size of products. In the case of the Korean products, it shows bright and glossy color totally, but in the case of North Korea products, it shows black and lackluster. And in the case of the foreign products, it has softer body than Korea one and shows white color on the surface. (2) In the internal shapes, the Korea products has a thicker cuticle layer than the foreign one, and has fewer ca-oxalate in the parenchyma cell.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.4
• /
• pp.202-209
• /
• 2002

The stochiometric mix of evaporating materials for the $CuInSe_2$single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CuInSe_2$compound crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $620^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuInSe_2$single crystal thin films measured from Hall effect by van der Pauw method. From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the $CuInSe_2$single crystal thin film, we have found that the values of spin orbit splitting $\Delta$So and the crystal field splitting $\Delta$Cr. From the photoluminescence measurement on $CuInSe_2$single crystal thin film, we observed free exciton ($E_x$) existing only high quality crystal and neutral bound exciton ($A^{\circ}$, X) having very strong peak intensity. Then, the full-width-at-half-maximum (FWHM) and binding energy of neutral donor bound exciton were 7 meV and 5.9 meV, respectivity. By haynes rule, an activation energy of impurity was 59 meV.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.226-232
• /
• 1994

Rapidly solidified $SmFe_{7+x}M_{x}(M=Mo,\;V,\;Ti)$ compound were found to crystallize in the ${Sm(Fe,\;M)}_{7}$ based stable magnetic phase by introducing a second transition element into the Sm-Fe binary system. The ${Sm(Fe,\;M)}_{7}$ phase exhibits the highest Curie temperatuer ($T_{c}=355^{\circ}C$) ever Known in the Sm-Fe magnetic systems with a quite high intrinsic coercivity($_{i}H_{c}=3~6\;kOe $). The ${Sm(Fe,\;M)}_{7}$ phase remains stable even after annealing if once form during the rapid solidification. The primary reason for the high coercive force is due to the fine grain size($2000~8000\;{\AA}$)of the magnetic ${Sm(Fe,\;M)}_{7}$ matrix phase, and the enhanced Curie temperature is attributed to the extended solid-solubility of the additive transition elements in Fe matrix, which leads to volume expansion of the ${Sm(Fe,\;M)}_{7}$ cell causing an enhanced coupling constant of Fe atoms.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.263-271
• /
• 1994

We have produced $Co_{1-x}Pt_{x}(X\;=\;0.53\;and\;0.75)$ alloy films by DC magnetron sputtering at various substrate temperatures and sputtering pressures. Sputter-deposited Co-Pt alloy films showed a strong (111) texture, and the degree of (111) texture of the as-deposited film was found to depend on the substrate temperature and Ar pressure. However, we observed that the degree of (111) texture did not affect the magnetic properties. In addition, we have investigated the effect of heat-treatment on magnetic properties of these films. While the magnetic properties of the $Co_{0.25}Pt_{0.75}$ alloy films showed no noticeable changes, the coercivities and the squarenesses of the $Co_{0.47}Pt_{0.53}$ alloy films were drastically increased by annealing. Structural analysis using transmission electron microscopy(TEM) and x-ray diffractornetry(XRD) revealed that $CoPt(L1_{0})$ and $CoPt_3(L1_{2})$ ordered phases, respectively, were formed, each with a strong (111) texture. By comparing the magnetic properties between $CoPt(L1_{0})$ and $CoPt_3(L1_{2})$ ordered phases in relation to the atomic arrangements in a unit cell, we conclude that the magnetic anisotropy in the Co-Pt alloy system depends mainly on the atomic arrangements of Co and Pt.

• Journal of the Korean Magnetics Society
• /
• v.13 no.2
• /
• pp.64-69
• /
• 2003

Ba-ferrite thin films were prepared on Si substrate with ${\alpha}$-Fe$_2$O$_3$ underlayer by a pulsed laser deposition system and characterized by X-ray, SEM, Mossbauer spectroscopy and VSM. The appropriate conditions of pulsation in ${\alpha}$-Fe$_2$O$_3$ and Ba-ferrite were the oxygen pressure of 0.1 Torr at a substrate temperature of 400$^{\circ}C$. Ba-ferrite crystals had the forms of ellipsoidal or needle and the grains shaped the more lumps with increasing the film thickness. Mossbauer spectroscopy assured that the direction of atomic spin in Fe ion was not random but had the tendency of arrangement normal to the substrate. The coercive force and squareness of hysteresis were larger in normal than in plane to the substrate but, the magnetic saturation moment was contrary to them. The spin arrangement was strongly affected by ${\alpha}$-Fe$_2$O$_3$ underlayer and the high coercive force and squareness were influenced by this. The crystal structure was conformed to be a Magntoplumbite symmetry with the hexagonal unit cell and the lattice constant of a increased with increasing film thickness, while c decreased

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.1011-1016
• /
• 1999

This study was performed to search a physical method having high yield and quality and minimum environmental pollution for extraction of pectin from apple pomace. Based on the physical solubilization of plant cell wall under the condition of high temperature, pressure and shearing stress, apple pomace was treated by a corotating intermeshing type twin-screw extruder with the diameter-to-length ratio of 1/20. The specific mechanical energy of extruder was introduced as system parameter for extrusion process modeling and the shaft speed, feed rate and moisture content as process variables. The yield, average molecular weight and galacturonic acid content of water-soluble polysaccharides obtained by extrusion were, respectively, modeled with the linear functions of the system parameter which was of the form as a linear function of process variables. The specific mechanical energy increased with increase of shaft speed and with decrease of feed rate and moisture content. Out of process variables, moisture content had the greatest effect on specific mechanical energy. The yield increased with increase of specific mechanical energy while the average molecular weight and galacturonic acid content increased with its decrease. In aspects of yield and quality of pectin, the results from this study showed the possibility to replace a traditional acidic method with the extrusion treatment of this study.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.747-754
• /
• 2000

DNA damages in post-mortem bovine muscle samples caused by gamma irradiation at doses of 1 to 10 kGy were determined by Comet assay. When the cell extract was prepared in a physical method and followed by neutral lysis and neutral electrophoresis, the optimal comet images could be obtained. DNA damages were evaluated from the mean tail length, the distributions of comet images in 4 groups divided by tail length and the relative damage index (RDI) values calculated from the distribution pattern. The mean tail length and RDI value were increased by increasing the irradiation dose, and the RDI value was found to be useful as an index for discriminating of irradiation and measuring the irradiated dose. Blind tests using Korean domestic (Hanwoo) and imported beef samples showed a higher RDI value for the latter. However, the value was lower than those of irradiated samples indicating that the cause of DNA damages in the imported beef samples might be not irradiation but low-temperature treatments. It was concluded from the results of this study that the irradiated beef and its irradiated dose could be detected and predicted by Comet assay.