• YAKHAK HOEJI
• /
• v.59 no.3
• /
• pp.113-119
• /
• 2015

Protein phosphorylation is one of most important post-translational modifications (PTMs) and plays an important role in regulation of protein function. Here we develop a method for a global identification of phosphopeptides and phosphorylation sites using nano-LC MS/MS. We compared two separation methods, C4 and strong cation ion exchange (SCX). Before phosphopeptides enrichment with $TiO_2$, total proteins from Rat 1 cells have been separated using C4 column or tryptic peptides of proteins from the cells have been separated using SCX column. Finally, we have detected 52 phosphorylation sites on 41 proteins from SCX method and 375 phosphorylation sites on 252 proteins from C4 method, and determined the function and localization of identified phosphoproteins using DAVID software. In particular, we showed new phosphorylation sites from membrane proteins related to various cell signaling mechanisms. This method may contribute to study global signal networks induced by various signals including ligands and drugs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1050-1053
• /
• 2003

Polymer dispersed liquid crystal mode can be classified into two cases, normally scattering mode (NS) and normally transparent (NT) mode according to an initial state. Electro-optic characteristic NS/NT PDLC mode can be improved by controlling the factors to influence the phase separation. In case of NS PDLC mode, we inspected change of a phase separation as a function of curing temperature for the mixture of E7 and NOA65 with different ratios. When the LC concentration is less than polymer such as LC : NOA65 = 40 : 60wt%, the PDLC cell is influenced strongly by the curing temperature. However, when LC concentration is much less than polymer such as LC : NOA65 : 80 : 20wt%, it is influenced slightly by the curing temperature. In case of NT PDLC mode, we observed change of a phase separation as a function of the ratio of the mixture and UV conditions such as curing temperature, UV intensity The cell made with strong UV intensity and curing temperature of $20^{\circ}C$, in case that the ratio of LC to polymer is 70:30wt%, showed good electro-optic characteristics.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.5
• /
• pp.1303-1310
• /
• 2005

This study was performed to investigate the effect of Bunsimgieumgagam on the stress due to the maternal separation in rat. In this study, we researched in 'the behavioral observation', 'the changes of body weight', 'quantitative analysis of the number of BrdU-positive cells per section in dentate gyrus of hippocampus', 'free radical scavenging assay' and 'MTT-based cytotoxicity assay of SK-N-SH cell line', in order to figure out the effect on which Bunsimgieumgagam has the increase of neuron in dentate gyrus of hippocampus damaged by the stress due to the maternal separation. In the behavioral Observation, Bunsimgieumgagam was also efficacious against the decline of one's behavior and anorexia derived from the stress by the maternal separation. In the change of body weight, it showed that the Bunsimgieumgagam is effective in the recovery of weight loss caused by heavy stress(p<0.05). Also, Bunsimgieumgagam had an increasing effect, which is similar to a normal state, on DG's neuron in hippocampus (P<0.001). In free radical scavenging assay, Bunsimgieumgagam had a superior free radical scavenging effect. And it showed a significant result with the high cell proliferation effect in MTT-based cytotoxicity assay(P<0.01, p<0.001) This result suggest that Bunsimgieumgagam has an anti-stress effect and a proliferation effect of neuron in dentate gyrus of hippocampus, and it shows the potential of Bunsimgieumgagam in the treatment for the various disorders derived from children's stress.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.279-304
• /
• 2023

Polybenzimidazole (PBI) based membranes have evolved in literature as a popular membrane material for various applications in the past two decades because of their high temperature thermal durability, strong mechanical and tensile properties, high glass transition temperature (T_g), ion conduction ability at elevated temperature (up to 200℃), oxidative or chemical durability along with robust network like structural rigidity, which make PBI membranes suitable for various potential applications in chemically challenging environments. Ion conducting PBI based membranes have been extensively utilized in high temperature proton exchange membrane fuel cells (HT-PEMFC). In addition, PBI based membranes have been vastly utilized for the development of gas separation membranes and organic solvent nanofiltration (OSN) membranes for their unique characteristics. This review will cover the recent progress and application of various types of flat sheet PBI based membranes for HT-PEMFC, gas separation and OSN application.

• Microbiology and Biotechnology Letters
• /
• v.26 no.3
• /
• pp.257-263
• /
• 1998

Alcaligenes eutrophus was successfully recovered from high cell density broth by pre-treatment with Fe-based coagulants. An inorganic coagulant, Fe$_2$(SO$_4$)$_3$, and a polymerized coagulant, Ferix-3, were used. Good coagulation was observed in broad pH range of 3 to 13, the floe size was increased with increasing pH of culture broth. The optimum pH of fermentation broth for cell recovery was 10 to 13. The optimum coagulant dosages to recover cells with 95% cell recovery were increased with increasing cell concentration. Optimal coagulant dosage was lower when the polymerized coagulant was used rather than the inorganic coagulant. The coexistence of NH$_4$$\^$+/ was increased coagulant requirement, and the coagulant requirement was 0.066g Fe$_3$$\^$+//g NH$_4$$\^$+/.

• Applied Microscopy
• /
• v.28 no.2
• /
• pp.159-170
• /
• 1998

The glandular secretory system of the capitate gandular trichomes in leaf of Thymus quinquecostatus Celakovsky was examined by transmission electron microscope. The glandular trichome was consisted of three cell layers; an basal cell layer, a stalk cell with single-celled intermediate layer and a discoid secretory layer with thickened cuticle. The secretory cell was dense, rich in mitochondria, rER, plastds, Golgi complex and had many vesicular structure. Typical plastids with reticulate body and plastoglobule were present in glandular trichome. The tytoplasm of secretory cell was filled with osmiophilic secretory materials. The secretory vesicles, originated from Golgi complex, appeared as membrane bounded vesicles and secreted to the outer wall surface. The presences of well developed rER, mitochondria, Golgi complex, and membrane-bounded vesicles fused with plasmalemma in the secreting cells indicate that the granulocrine mechanism of secretion was occurring in T. quinquecostatus. Subcuticular cavity was developed between the cuticular layer and the secretory cell wall, and it formed above the secretory cell upon separation of cuticle-wall.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1683-1684
• /
• 2008

For direct detection of microbes in air, samples have to be collected but environmental particles such as dust are also trapped in such samples. Therefore the isolation of target bacteria from non-biological materials of similar size is of great importance in the identification of such organisms. Dielectrophoresis is an emerging technique that can rapidly separate cells in microfluidics. In this paper we proposed a new method for the separation of airborne microbes using condensation and dielectrophoresis. This system could be used as a continuous flow through separation system for various particles and utilized as a pretreatment technique for microbe detection.

• Parasites, Hosts and Diseases
• /
• v.47 no.1
• /
• pp.69-71
• /
• 2009

The tegument of tapeworms is known to be composed of an outer syncytial cytoplasm layer which includes microtriches and cytoplasmic organelles (= syncytial layer), and a parenchymatous cytoplasm layer that contains subtegumental cell nuclei (= subtegumental layer) and organelles. In the present study, separation of the syncytial layer of the sparganum, the plerocercoid stage of Spirometra mansoni, was tried using urea as the chemical reagent. Histological sections were prepared to visualize the status of separation after staining with hematoxylin and eosin. The results showed that the syncytial layer of the sparganum tegument which includes microtriches and cytoplasmic organelles were successfully separated from the parenchyma using 3 M urea.

• Journal of Life Science
• /
• v.16 no.6
• /
• pp.938-941
• /
• 2006

Continuous fermentation process for the production of soluble glucan using mutant Agrobacterium sp. ATCC31750 has been developed in this research. When the concentration of soluble glucan was higher than 6 g/l, the viscosity of the fermented broth was too high and it needs complex separation process to separate from culture broth. Mathematical models which describe the cell growth and glucan production was developed and they kinetic parameters were estimated with experimental data. They are used for the optimization of continuous fermentation process and calculate optimal dilution rate for easy separation of glucan 4 g/l. With continuous fermentation, glucan production rate was increased 1.8 times more than that with batch fermentation.

• KSBB Journal
• /
• v.10 no.4
• /
• pp.358-369
• /
• 1995

A mathematical model using local thermodynamic equilibrium isotherms for adsorption in encapsulated adsorbent is proposed in order to optimize the design parameters in situ bioproduct separation process. The model accurately follows the experimental data on the adsorption of berberine, secondary metabolite produced in Thaictrum rugosum plant cell culture. The adsorption rate on encapsulated adsorbent is compared with that on alginate-entrapped adsorbent. The result shows that the higher loading capacity in encapsulated adsorbent is mainly due to the increase in the maximum solid phase concentration. Based on the adsorption rate and loading capacity, the encapsulated adsorbent would be more useful than the entrapped adsorbent when used in situ bioproduct separation process. Design parameters in situ bioproduct separation process, such as the size of the capsule, membrane thickness, the ratio of capsule volume to bulk volume, the ratio of single capsule volume to total capsule volume and the adsorbent content in the capsule, are evaluated by using the model. The ratio of single capsule volume to total capsule volume is the most effective parameter for adsorption of berberine on encapsulated adsorbent.